Dependence of adhesion on degradation mechanisms of ethylene co-vinyl acetate encapsulants over the lifetime of photovoltaic modules
Source abstract
Abstract
The long-term reliability of encapsulation has a critical impact on the overall cost and effectiveness of photovoltaic modules. An often overlooked but important element of this reliability concerns adhesive degradation of the encapsulant, which results in delamination . This work critically examines the degradation mechanisms – deacetylation, β-scission, and hydrolytic depolymerization – primarily responsible for adhesion loss in ethylene co-vinyl acetate (EVA) encapsulants to provide evidence and clarity regarding the contribution of these mechanisms to the adhesive degradation over the lifetime of a module. EVA samples obtained from mini-modules exposed in two sets of controlled, accelerated conditions – with and without ultraviolet (UV) radiation – are characterized to find specific evidence for the proposed degradation mechanisms. The mini-modules were exposed up to 10,000 h, which represents up to 15–20 years in the field. Results affirm that initially, deacetylation dominates the degradation before scission takes over, followed by hydrolytic depolymerization. Additional analysis highlights the climacteric interdependency between deacetylation and hydrolytic depolymerization as it relates to eventual delamination, where deacetylation products catalyze interfacial hydrolysis reactions. Furthermore, effects occurring at a given interface are isolated, explicitly providing evidence for how these mechanisms are nonuniform throughout the thickness of the EVA. Results demonstrate that the EVA that interfaces with the glass as opposed to the cell experiences increased levels of degradation, explaining why this initially stronger interface becomes the preferential interface for delamination after longer periods of exposure. Additionally, elevated temperatures alone are shown to induce limited migration of sodium ions across the glass/EVA interface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
2. Solar module fabrication
3. Köntges · 2014
4. Thermal degradation of ethylene (vinyl acetate). Kinetic analysis of thermogravimetric data10.1007/BF01982703 ↗
5. Thermal degradation of EVA and EBA—a comparison. I. Volatile decomposition products10.1002/app.1991.070430917 ↗
6. UV aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents10.1016/j.polymdegradstab.2010.02.020 ↗
7. Chemical structure of EVA films obtained by pulsed electron beam and pulse laser ablation10.3390/polym11091419 ↗
8. EVA degradation mechanisms simulating those in PV modules
9. Chemistry of removal of ethylene vinyl acetate binders10.1023/A:1017525501161 ↗
10. A comparative study of thermal ageing characteristics of poly(ethylene-co-vinyl acetate) and poly(ethylene-co-vinyl acetate)/carbon black mixture10.1002/pat.485 ↗
11. Thermal degradation of ethylene-vinyl acetate copolymer10.1002/pol.1973.130110805 ↗
12. Wu · 2012
13. The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant10.1016/j.ijadhadh.2016.03.008 ↗
14. Effects of different lamination conditions on the reliability of encapsulation materials of pv modules: adhesion strength
15. Effect of UV aging on degradation of Ethylene-vinyl Acetate (EVA) as encapsulant in photovoltaic (PV) modules
16. Development and first results of the width-tapered beam method for adhesion testing of photovoltaic material systems
17. Encapsulation and backsheet adhesion metrology for photovoltaic modules10.1002/pip.2817 ↗
18. Evaluating and predicting molecular mechanisms of adhesive degradation during field and accelerated aging of photovoltaic modules10.1002/pip.3045 ↗
19. Defining threshold values of encapsulant and backsheet adhesion for PV module reliability10.1109/JPHOTOV.2017.2746682 ↗
20. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
21. Nika: software for two-dimensional data reduction10.1107/S0021889812004037 ↗
22. Monoclinic crystallites in ethylene copolymers detected by solid-state NMR and X-ray diffraction10.1021/ma030132n ↗
23. Changes of morphology and material properties of thin ethylene-vinyl acetate-films under different aging conditions
24. Gu · 2013
25. Non-destructive 2D-luminescence detection of EVA in aged PV modules: correlation to calorimetric properties, additive distribution and a clue to aging parameters10.1016/j.solmat.2016.09.011 ↗
26. 1996
27. Coblentz Society Inc., Evaluated infrared reference spectra, in: P.J. Linstrom, W.G. Mallard (Eds.), NIST Chem. WebBook, NIST Stand. Ref. Database Number 69, National Institute of Standards and Technology, Gaithersburg, MD, n.d. .
28. Stability of EVA modules
29. Acetic acid production, migration and corrosion effects in ethylene-vinyl- acetate- (EVA-) based pv modules
30. Morphology and mechanical properties of reactive compatibilized polystyrene/ethylene-vinyl acetate-vinyl alcohol blends10.1002/app.10627 ↗
31. The characterisation of newly developed and promising hydrolyzed ethylene vinyl acetate copolymers10.1080/00218468008078916 ↗
32. Hagting · 2015
33. Holley · 1998
34. Köntges · 2017
35. Electrodeposition of oriented cerium oxide films10.1155/2013/482187 ↗
36. On the mechanism of the thermal degradation of polyvinyl acetate10.1002/polc.5070420336 ↗
37. Polymer precursors of polyacetylene. Thermal degradation of poly(vinyl esters). Part 1-Molecular weight dependence of the autocatalytic thermal degradation of poly(vinyl acetate) (PVAc)10.1016/0141-3910(88)90065-1 ↗
38. Encapsulant materials for PV modules
39. Reliability of PV modules and balance-of-system components
40. Mechanisms of adhesion degradation at the photovoltiac module's cell metallization‐encapsulant interface10.1002/pip.3106 ↗
41. Pern · 2005
42. COAD ® 13 CALCIUM STEARATE SERIES POLYOLEFIN APPLICATIONS: TYPICAL PROPERTIES COAD ® 13 D COAD ® 13F COAD ® 13M, (n.d.).
43. Monitoring of the discoloration on γ-irradiated PE and EVA films to evaluate antioxidant stability10.1002/app.46114 ↗
44. Koenig
45. Evaluation of PV module field performance
46. Durability of ionomer encapsulants in photovoltaic modules10.1016/j.solmat.2020.110397 ↗
47. Mechanism of the acid-catalyzed Si−O bond cleavage in siloxanes and siloxanols. A theoretical study10.1021/om011055s ↗
48. Chojnowski · 1995