Hot-embossed microcone-textured fluoropolymer as self-cleaning and anti-reflective photovoltaic module covers
Source abstract
Abstract
Abstract Superhydrophobic self-cleaning covers, exhibiting small roll-off angles of water droplets, mitigate the soiling of photovoltaic (PV) modules. In this work, microcone-textured fluorinated ethylene propylene (FEP) covers attached to the front side of PV modules offer improved performance via dual functionality, namely via self-cleaning and reduced parasitic reflection losses. The aspect ratio of the FEP microcone-textures was investigated in view of both functionalities. The best performing microcone-textured cover (aspect ratio of 0.7) demonstrated a significant enhancement in short-circuit current density (JSC) of 3.1% relative when applied to Cu(In,Ga)Se2 solar cells. Furthermore, compared to a planar FEP layer, the microcone-textures showed superior self-cleaning capability when tested using different soil types. Microcone-textured FEP recovered 100% and 65.8% of photocurrent generated when soiled with sea sand and Arizona test dust, respectively. We also present robust microcone-textured FEP covers such that superhydrophobicity was still achieved even with truncated microcones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Surface Modification and Superhydrophobicity · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Impact of the 4 April 2014 Saharan dust outbreak on the photovoltaic power generation in Germany10.5194/acp-17-13391-2017 ↗
2. Dust and soiling issues and impacts relating to solar energy systems: literature review update for 2012-201510.1016/j.rser.2016.04.059 ↗
3. Fundamental studies of adhesion of dust to PV module surfaces: chemical and physical relationships at the microscale10.1109/JPHOTOV.2016.2528409 ↗
4. Impact of dust on the photovoltaic (PV) modules characteristics after an exposition year in Sahelian environment: the case of Senegal
5. Energy yield loss caused by dust deposition on photovoltaic panels10.1016/j.solener.2014.05.030 ↗
6. Power loss due to soiling on solar panel: a review10.1016/j.rser.2016.01.044 ↗
7. Performance degradation of photovoltaic power system: review on mitigation methods10.1016/j.rser.2016.09.072 ↗
8. Dust effect on flat surfaces - a review paper10.1016/j.rser.2014.02.016 ↗
9. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
10. A practical superhydrophilic self cleaning and antireflective surface for outdoor photovoltaic applications10.1016/j.solmat.2011.10.011 ↗
11. Experimental evaluation and analysis of electrodynamic screen as dust mitigation technology for future Mars missions10.1109/TIA.2009.2013542 ↗
12. Mitigation of dust impact on solar collectors by water-free cleaning with transparent electrodynamic films: progress and challenges10.1109/JPHOTOV.2017.2721462 ↗
13. Resistance of solid surfaces to wetting by water10.1021/ie50320a024 ↗
14. Wettability of porous surfaces10.1039/tf9444000546 ↗
15. Slippy and sticky microtextured solids10.1088/0957-4484/14/10/307 ↗
16. Progress in superhydrophobic surface development10.1039/B712575P ↗
17. Purity of the sacred lotus, or escape from contamination in biological surfaces10.1007/s004250050096 ↗
18. Super-hydrophobic PDMS surface with ultra-low adhesive force10.1002/marc.200500458 ↗
19. World estimates of PV optimal tilt angles and ratios of sunlight incident upon tilted and tracked PV panels relative to horizontal panels10.1016/j.solener.2018.04.030 ↗
20. Self-cleaning performance of superhydrophobic hot-embossed fluoropolymer films for photovoltaic modules10.1016/j.solmat.2018.09.017 ↗
21. Fully reversible transition from wenzel to cassie-baxter states on corrugated superhydrophobic surfaces10.1021/la903091s ↗
22. Combining stereolithography and replica molding: on the way to superhydrophobic polymeric devices for photovoltaics10.1016/j.matdes.2017.07.068 ↗
23. Low-cost, flexible, and self-cleaning 3D nanocone anti-reflection films for high-efficiency photovoltaics10.1002/adma.201304938 ↗
24. Highly efficient flexible perovskite solar cells with antireflection and self-cleaning Nanostructures10.1021/acsnano.5b04284 ↗
25. Fabrication and characterization of the hierarchical structure for superhydrophobicity and self-cleaning10.1016/j.ultramic.2009.03.030 ↗
26. Hierarchically sculptured plant surfaces and superhydrophobicity10.1021/la9017322 ↗
27. Hierarchical surfaces for enhanced self-cleaning applications10.1088/1361-6439/aa62bb ↗
28. Micro-micro hierarchy replacing micro-nano hierarchy: a precisely controlled way to produce wear-resistant superhydrophobic polymer surfaces10.1021/la303358h ↗
29. Design of hierarchical surfaces for tuning wetting characteristics10.1021/acsami.6b13615 ↗
30. Bioinspired superhydrophobic highly transmissive films for optical applications10.1002/smll.201601443 ↗
31. Towards mass fabrication of hot embossed plant surface texture replicas as photovoltaic cover layers
32. Nanotextured silica surfaces with robust superhydrophobicity and omnidirectional broadband supertransmissivity10.1021/nn301112t ↗
33. High performance light trapping textures for monocrystalline silicon solar cells10.1016/S0927-0248(00)00115-X ↗
34. Three-dimensionally designed anti-reflective silicon surfaces for perfect absorption of light10.1039/C4CC07341J ↗
35. Self-cleaning effect of highly water-repellent microshell structures for solar cell applications10.1039/C0JM02463E ↗
36. Micro ‐ cone textures for improved light in ‐ coupling and retroreflection ‐ inspired light trapping at the front surface of solar modules10.1002/pip.3133 ↗
37. Texture of the Viola flower for light harvesting in photovoltaics10.1021/acsphotonics.7b01153 ↗
38. Perovskite-silicon tandem solar modules with optimised light harvesting10.1039/C8EE00237A ↗
39. Directional selectivity and ultra-light-trapping in solar cells
40. Super-non-wettable surfaces: a review10.1016/j.colsurfa.2014.02.016 ↗
41. Fluoropolymer films in the photovoltaic industry10.1016/j.jfluchem.2004.05.013 ↗
42. A comparison of 15 polymers for application in photovoltaic modules in PV-powered boats10.1016/j.apenergy.2011.10.042 ↗
43. 2011 · 36
44. FEP encapsulated crack-based sensor for measurement in moisture-laden environment
45. Self-cleaning microcavity array for photovoltaic modules10.1021/acsami.7b15579 ↗
46. Hot embossed micro-textured thin superhydrophobic Teflon FEP sheets for low ice adhesion10.1016/j.surfcoat.2017.01.026 ↗
47. The use of FEP Teflon in solar cell cover technology presented
48. Advanced solar flat plate collectors with full area absorber, front side film and rear side vacuum super insulation10.1016/j.solmat.2015.06.019 ↗
49. Hydrophobic – hydrophilic surfaces exhibiting dropwise condensation for anti-soiling applications10.1109/JPHOTOV.2018.2882636 ↗
50. Fluoropolymer coatings for solar cover glass : anti-soiling mechanisms in the presence of dew
51. Fundamentals of soiling processes on photovoltaic modules10.1016/j.rser.2018.09.015 ↗
52. Study of soiling loss on photovoltaic modules with artificially deposited dust of different gravimetric densities and compositions collected from different locations in India10.1109/JPHOTOV.2015.2495208 ↗
53. Spectral sensitivity of simulated photovoltaic module soiling for a variety of synthesized
54. The field experiments and model of the natural dust deposition effects on photovoltaic module efficiency10.1007/s11356-018-1970-x ↗
55. Assessing the feasibility of using the heat demand-outdoor Characterization of soiling on PV modules in the Atacama Desert10.1016/j.egypro.2017.09.263 ↗
56. A novel model to estimate the cleaning frequency for dirty solar photovoltaic ( PV ) modules in desert environment10.1016/j.solener.2016.11.016 ↗
57. Characterization of dust accumulated on photovoltaic panels in Doha10.1016/j.solener.2016.11.053 ↗
58. Characterization of power losses of a soiled PV panel in Shekhawati region of India10.1016/j.solener.2016.02.033 ↗
59. Experimental analysis of the effect of dust's physical properties on photovoltaic modules in Northern Oman10.1016/j.solener.2016.09.019 ↗
60. Dust accumulation effect on efficiency of Si photovoltaic modules10.1063/1.3622609 ↗
61. Characterization of dust collected from PV modules in the area of Dhahran , Kingdom of Saudi Arabia , and its impact on protective transparent covers for photovoltaic applications10.1016/j.solener.2016.11.051 ↗
62. Adaptable bioinspired special wetting surface for multifunctional oil/water separation10.1038/srep39970 ↗
63. High-efficiency Cu(In,Ga)Se2 cells and modules10.1016/j.solmat.2013.05.002 ↗
64. Freeform surface invisibility cloaking of interconnection lines in thin-film photovoltaic modules10.1016/j.solmat.2018.03.034 ↗
65. Of the Interior, Rainfall calculator, metric units. How much water falls during a storm?
66. Controlling the wettability of polycarbonate substrates by producing hierarchical structures using Direct Laser Interference Patterning10.1016/j.eurpolymj.2017.12.001 ↗
67. Roughness optimization for biomimetic superhydrophobic surfaces10.1007/s00542-005-0602-9 ↗
68. Miller · 2016
69. Accelerated testbed for studying the wear , optical and electrical characteristics of dry cleaned PV solar panels10.1016/j.solener.2017.02.014 ↗
70. Effects of soiling and weathering on the albedo of building envelope materials: lessons learned from natural exposure in two European cities and tuning of a laboratory simulation practice10.1016/j.solmat.2019.110264 ↗
71. From the impact of harsh climates and environmental conditions on PV-modules -development of a soiling and abrasion test
72. Effects of natural and manual cleaning on photovoltaic output10.1115/1.4023927 ↗
73. Experimental investigation of dust deposition e ff ects on photo-voltaic output performance10.1016/j.solener.2017.11.010 ↗
74. Design and implementation of microcontroller based automatic dust cleaning system for solar panel
75. Review of yield increase of solar panels through soiling prevention , and a proposed water-free automated cleaning solution10.1016/j.rser.2017.10.014 ↗
76. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant : a critical review10.1016/0927-0248(95)00150-6 ↗
77. Photocatalytic, self-cleaning, antireflective coating for photovoltaic panels: characterization and monitoring in real conditions10.1016/j.solener.2017.10.088 ↗
78. Nanosized patterned protective glass exhibiting high transmittance and self-cleaning effects for photovoltaic systems
79. Experimental investigation on the large-area fabrication of micro-pyramid arrays by roll-to-roll hot embossing on PVC film10.1088/0960-1317/24/4/045023 ↗
80. Flow behavior of polymers during the roll- to-roll hot embossing process10.1088/0960-1317/25/6/065004 ↗
81. Roll-to-Roll hot embossing of 1D and 2D photonic Nanostructures10.1002/adem.201900110 ↗
82. A review of roll-to-roll nanoimprint lithography10.1186/1556-276X-9-320 ↗
83. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
84. Microelectronic Engineering Micro-fabrication of polymeric devices using hot roller embossing, Micro/Nanolithography A Heuristic Asp
85. Continuous manufacturing of reentrant structures via roll-to-roll process
86. Continuous double-sided roll-to-roll imprinting of polymer film10.1143/JJAP.47.5142 ↗
87. Large-area nanoimprint lithography and applications
88. ITO-free flexible polymer solar cells : from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
89. Pern · 2008
90. The thermo-mechanical degradation of ethylene vinyl acetate used as a solar panel adhesive and encapsulant10.1016/j.ijadhadh.2016.03.008 ↗
91. Ethylene-Vinyl Acetate (EVA) encapsulants for photovoltaic modules: degradation and discoloration mechanisms and formulation modifications for improved piiotostability10.1002/apmc.1997.052520114 ↗
92. Bernt · 2019