journal article·2018-05

Stoichiometry control of sputtered zinc oxide films by adjusting Ar/O2 gas ratios as electron transport layers for efficient planar perovskite solar cells

Wenjing Zhao, Kang Wang, Hua Li, Zhou Yang, Zhike Liu, Jie Sun, Dapeng Wang, Shengzhong (Frank) Liu

Publisher page

Abstract

Abstract To modify the stoichiometry and enhance electronic transportation of electron transport layers (ETLs) potentially for the large-scale high performance planar perovskite solar cells (PSCs) on the flexible substrate, ZnO films as ETLs with controlled stoichiometry are fabricated by magnetron sputtering method under a mixture working gases of Ar and O 2 at room temperature. The impact of Ar/O 2 ratios on the structural, electrical, and optical properties of ZnO films is systematically investigated. The X-ray photoelectron spectroscopy results indicate that the sputtered ZnO films with controlled stoichiometry are successfully achieved. For the proper deposition condition with Ar/O 2 ratio of 1:4, ZnO film exhibits large-size grains, low defect states density, and good optical crystalline quality. Furthermore, the sputtered ZnO films deposited under various Ar/O 2 ratios are introduced into the PSCs as ETLs. The photovoltaic performance of the PSCs is strongly dependent on the properties of the sputtered ZnO ETLs. Compared with the ZnO ETLs prepared under various Ar/O 2 ratios, the PSCs based on the ZnO ETL deposited under the Ar/O 2 ratio of 1:4 demonstrate the improved short-circuit current and fill factor, contributing to a maximum power conversion efficiency of 16.60%. This study highlights that the sputtered ZnO film is one of promising ETLs for high-efficiency PSCs under low-temperature processing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
2. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
3. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
5. Best research-cell efficiencies, 〈http://www.nrel.gov/pv/assets/images/efficiency-chart.png〉.
6. Rational strategies for efficient perovskite solar cells10.1021/acs.accounts.5b00444 ↗
7. Two-inch-sized perovskite CH3NH3PbX3 (X = Cl, Br, I) crystals: growth and characterization10.1002/adma.201502597 ↗
8. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
9. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
10. Direct measurement of the exciton binding energy and efective masses for charge carriers in organic–inorganic tri-halide perovskites10.1038/nphys3357 ↗
11. Enhancing efficiency and stability of perovskite solar cells through Nb-doping of TiO2 at low temperature10.1039/C5TA01824B ↗
12. Alternating precursor layer deposition for highly stable perovskite films towards efficient solar cells using vacuum deposition10.1021/acsami.7b01063 ↗
13. Electron transport layer-free planar perovskite solar cells: further performance enhancement perspective from device simulation10.1016/j.solmat.2016.03.035 ↗
14. Efficient electron-transport layer-free planar perovskite solar cells via recycling the FTO/glass substrates from degraded devices10.1016/j.solmat.2016.08.025 ↗
15. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
16. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer10.1016/j.nanoen.2016.11.028 ↗
17. Star-shaped hole transporting materials with a triazine unit for efficient perovskite solar cells10.1039/C4CC04550E ↗
18. Flexible,low-temperature,solution processed ZnO-based perovskite solid state solar cells10.1039/c3cc46534a ↗
19. Improvement of stability of ZnO/CH3NH3PbI3 bilayer by aging step for preparing high-performance perovskite solar cells under ambient conditions10.1039/C6RA10072D ↗
20. Comprehensive study of sol−gel versus hydrolysis−condensation methods to prepare ZnO films: electron transport layers in perovskite solar cells10.1021/acsami.7b04833 ↗
21. Enhanced thermochemical stability of CH3NH3PbI3 perovskite films on zinc oxides via new precursors and surface engineering10.1021/acsami.7b07192 ↗
22. Well-arrayed ZnO nanostructures formed by multi-annealing processes at low temperature10.1002/pssc.201100271 ↗
23. Solution-processed Nb:SnO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsami.6b13362 ↗
24. Influence of sputtering pressure on band gap of Zn1-xMgxO thin films prepared by radio frequency magnetron sputtering10.1116/1.3622316 ↗
25. Magnetron sputtered zinc oxide nanorods as thickness-insensitive cathode interlayer for perovskite planar-heterojunction solar cells10.1021/am506672j ↗
26. Formation of metal nanoparticles by short-distance sputter deposition in a reactive ion etching chamber10.1063/1.3211326 ↗
27. Investigation of carrier generation mechanism in fluorine-doped n+In–Ga–Zn-O for self-aligned thin-film transistors10.1109/JDT.2015.2472981 ↗
28. Ionoluminescence study of Zn− and O− implanted ZnO crystals: an additional perspective10.1016/j.apsusc.2016.02.174 ↗
29. Effect of annealing temperature on the structure and optical properties of ZnO nanoparticles10.1016/j.jallcom.2008.10.135 ↗
30. Trap density determination by space-charge-limited currents10.1063/1.1728818 ↗
31. Efficiency enhancement of perovskite solar cells through fast electron extraction: the role of graphene quantum dots10.1021/ja4132246 ↗
32. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
33. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-peterojunction solar cells10.1002/adma.201400231 ↗
34. Charge accumulation and hysteresis in perovskite-based solar cells: an electro-optical analysis10.1002/aenm.201500829 ↗