journal article·2018-06

The influence of DMSO and ether via fast-dipping treatment for a perovskite solar cell

Ki-Hwan Hwang, Sang Hun Nam, Dong In Kim, Hyeon Jin Seo, Jin-Hyo Boo

Publisher page

Abstract

Abstract Preparing dense organic-inorganic hybrid perovskite film is hindered by the extremely low solubility of lead(II) iodide (PbI2) at one-step coating process using one-solution (PbI2 + CH3NH3I + DMF). Thus, dimethyl sulfoxide (DMSO) has been widely used to enhance the solubility through the formation of adducts. However, the required mixture of DMSO and DMF cannot be simultaneously evaporated at low temperatures, owing to the different boiling points, which are influenced by the surface morphology. Consequently, this also affects the solar energy conversion efficiency of the perovskite solar cells. In this study, we develop a new approach for controlling the evaporation of DMF and DMSO by dip-coating ether on the top of the prepared thin film composed of PbI2, methylammonium iodide (MAI), DMF, and DMSO. Interestingly, it reveals that ether acted as an agent for simultaneous evaporation at similar temperatures, which then allows it to control surface morphology, and achieve dense perovskite. The fabricated inverted-perovskite PbI2 thin film solar cell shows that the efficiency reached up to 16.3% with high reproducibility. The ether-dipping post-treatment serves as a promising means for enhancing the efficiency of perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Tolerance factor and the stability discussion of ABO3–type ilmenite
2. Study of perovskite compounds10.1007/s10973-008-9329-z ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
5. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
6. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
7. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
8. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
9. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via Lewis base adduct of lead (II) iodide10.1021/jacs.5b04930 ↗
10. Morphology-photovoltaic property correlation in perovskite solar cells: one-step versus two-step deposition of CH3NH3PbI310.1063/1.4891275 ↗
11. Effective improvement of the photovoltaic performance of carbon-based perovskite solar cells by additional solvents10.1007/s40820-016-0094-4 ↗
12. A fast deposition‐crystallization procedure for highly efficient lead iodide perovskite thin‐film solar cells10.1002/ange.201405334 ↗
13. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
14. The mechanism of toluene-assisted crystallization of organic–inorganic perovskites for highly efficient solar cells10.1039/C6TA01087C ↗
15. Controlled growth of CH3NH3PbI3 films towards efficient perovskite solar cells by varied-stoichiometric intermediate adduct10.1016/j.apsusc.2017.01.240 ↗
16. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
17. Synergistic improvements in stability and performance of lead iodide perovskite solar cells incorporating salt additives10.1039/C5TA10288J ↗
18. Additive enhanced crystallization of solution‐processed perovskite for highly efficient planar‐heterojunction solar cells10.1002/adma.201400231 ↗
19. Performance enhancement of perovskite solar cells with a modified TiO2 electron transport layer using Zn-based additives10.1039/C6RA01149G ↗
20. A facile methodology for engineering the morphology of CsPbX3 perovskite nanocrystals under ambient condition10.1038/srep37693 ↗
21. Morphology control of planar heterojunction perovskite solar cells with fluorinated PDI films as organic electron transport layer10.1016/j.solener.2016.04.017 ↗
22. Tuning perovskite morphology by polymer additive for high efficiency solar cell10.1021/acsami.5b00052 ↗
23. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization10.1038/ncomms8586 ↗
24. Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells10.1016/j.nanoen.2014.08.015 ↗
25. Antisolvent-assisted powder engineering for controlled growth of hybrid CH3NH3PbI3 perovskite thin films10.1063/1.4974942 ↗
26. Facile preparation of smooth perovskite films for efficient meso/planar hybrid structured perovskite solar cells10.1039/C5CC02534F ↗
27. Perovskite solar cells with large-area CVD-graphene for tandem solar cells10.1021/acs.jpclett.5b01177 ↗
28. Chemical vapor deposition grown formamidinium perovskite solar modules with high steady state power and thermal stability10.1039/C6TA04267H ↗
29. High-performance perovskite solar cells fabricated by vapor deposition with optimized PbI2 precursor films10.1039/C5RA19343E ↗
30. Fast preparation of uniform large grain size perovskite thin film in air condition via spray deposition method for high efficient planar solar cells10.1016/j.solmat.2016.12.032 ↗
31. Morphology control of the perovskite films for efficient solar cells10.1039/C4DT03869J ↗
32. An extensive study of protein phase diagram modification: increasing macromolecular crystallizability by temperature screening10.1021/cg800698p ↗
33. Solid-solution aqueous-solution equilibria; thermodynamic theory and representation10.2475/ajs.290.2.164 ↗
34. Toughness properties of a silicon carbide with an in situ induced heterogeneous grain structure10.1111/j.1151-2916.1994.tb04637.x ↗
35. Abnormal growth of faceted (WC) grains in a (Co) liquid matrix10.1007/BF02652373 ↗
36. Abnormal grain growth of rutile TiO2 induced by ZrSiO410.1016/j.jcrysgro.2012.08.015 ↗
37. Synthesis and vibrational spectra of some lead (II) halide adducts with O-, S-, and N-donor atom ligands10.1139/v76-493 ↗
38. Absorption and electrochromic modulation of near-infrared light: realized by tungsten suboxide10.1039/C5NR09147K ↗
39. Haze-free highly transparent glass substrates with nanostructured surface by using self-assembled Ag etch masks10.1149/2.0071602jss ↗
40. Structural evolution in methylammonium lead iodide CH3NH3PbI310.1021/acs.jpca.5b09884 ↗
41. Complete structure and cation orientation in the perovskite photovoltaic methylammonium lead iodide between 100 and 352 K10.1039/C4CC09944C ↗
42. Oxidized Ni/Au transparent electrode in efficient CH3NH3PbI3 perovskite/fullerene planar heterojunction hybrid solar cells10.1002/adma.201504621 ↗
43. Planar heterojunction perovskite solar cells with superior reproducibility10.1038/srep06953 ↗
44. Two different mechanisms of CH3NH3PbI3 film formation in one-step deposition and its effect on photovoltaic properties of OPV-type perovskite solar cells10.1039/C5TA06870C ↗
45. The effect of solvents on the performance of CH3NH3PbI3 perovskite solar cells10.3390/en10050599 ↗
46. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
47. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
48. Modulating hysteresis of perovskite solar cells by a poling voltage10.1021/acs.jpcc.6b05775 ↗
49. Efficient planar heterojunction perovskite solar cells with weak hysteresis fabricated via bar coating10.1016/j.solmat.2016.09.046 ↗
50. Inverted hysteresis in CH3NH3PbI3 solar cells: role of stoichiometry and band alignment10.1021/acs.jpclett.7b00571 ↗
51. Organic solar cells: a new look at traditional models10.1039/c1ee01663f ↗
52. Effects of ultraviolet soaking on surface electronic structures of solution processed ZnO nanoparticle films in polymer solar cells10.1039/C4TA02695K ↗
53. Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, and photovoltaic windows10.1039/C0EE00318B ↗
54. Considerably improved photovoltaic performance of carbon nanotube-based solar cells using metal oxide layers10.1038/ncomms7305 ↗
55. Band tail recombination in polymer: fullerene organic solar cells10.1063/1.4892869 ↗