Architecture of monophase InSe thin film structures for solar cell applications
Source abstract
Abstract
Abstract Control of microstructural evolution during the crystallization of InSe thin films is an inevitable strategy to mold their fundamental properties and potential for the fabrication of solar cells. Impact of annealing as well as substrate temperature on the crystallization progress and physical characteristics of thermally evaporated InSe was examined systematically, which eventually dictates the overall performance of resulting device. Structural and compositional characterizations have been thoroughly investigated by X-ray diffraction and energy dispersive X-ray analyses. InSe films form hexagonal structure with a preferred orientation of crystallites along the (004) direction upon crystallization. The layer of InSe is formed by two concomitant processes, deposition and recrystallization. Application of heat treatment resulted in topographical modification, which was probed by an atomic force microscope. Surface roughness was enhanced due to the influence of temperature and thereby the growth of grains. Investigations of electrical and optical properties, thus provided ample evidence for the use of crystallized monophase InSe as an absorber layer in photovoltaic conversion devices. Carrier concentration and mobility of charge carriers estimated from the Hall measurements were found to be 19.43×1020 cm−3 and 2.01 cm2 V−1 s−1 respectively. Moreover, this research work explores power conversion efficiency of p-InSe/n-CdS heterojunction solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Photovoltaic solar cells: an overview of state-of-the-art cell development and environmental issues10.1016/j.pcrysgrow.2005.10.002 ↗
2. Photovoltaic structures using chemically deposited tin sulfide thin films10.1016/j.tsf.2008.11.043 ↗
3. Optical properties and photovoltaic device applications of InSe films10.1016/0040-6090(81)90245-5 ↗
4. Photovoltaic performance of TCVA-InSe hybrid solar cells based on nanostructure films10.1016/j.solmat.2016.10.051 ↗
5. Recent developments in II-VI and III-VI semiconductors and their applications in solar cells10.1039/B512182E ↗
6. Different phases of indium selenide prepared by annealing In/Se bilayer at various temperatures: characterization studies10.1016/j.solmat.2005.09.013 ↗
7. Optical properties of nanostructured InSe thin films10.1016/j.optcom.2011.11.031 ↗
8. Preparation and characterization of indium selenide thin films from a chemical route10.1016/j.matchemphys.2005.01.063 ↗
9. Optical parameters of In-Se and In-Se-Te thin amorphous films prepared by pulsed laser deposition10.1016/j.jpcs.2007.02.043 ↗
10. Annealing behaviour of optical properties and structure of r.f.-sputtered InSe films10.1016/0040-6090(91)90003-G ↗
11. Structural and optical properties of electrodeposited indium selenide thin films10.1007/BF00731127 ↗
12. Optical and photovoltaic properties of indium selenide thin films prepared by van der Waals epitaxy
13. Temperature dependence of the band gap, refractive index and single-oscillator paraametres of amorphous indium selenide thin films10.1016/j.optmat.2006.09.009 ↗
14. Photovoltaic structures using thermally evaporated SnS and CdS thin films10.1016/j.tsf.2013.08.078 ↗
15. Characterization of vacuum evaporated In-Se thin films10.1007/BF02382837 ↗
16. The effect of substrate and post-annealing temperature on the structural and optical properties of polycrystalline InSe thin films10.1016/S0040-6090(97)00929-2 ↗
17. The crystallization and decomposition on InSe thin films10.1016/0040-6090(72)90181-2 ↗
18. Preparation and properties of indium selenide (InSe) thin films for selective surface applications
19. Annealing and light effect on optical and electrical properties of evaporated indium selenide thin films10.1016/j.physe.2007.12.010 ↗
20. Formation of InSe and GaSe deposited films and their electrical properties10.1016/0040-6090(88)90289-1 ↗
21. Preparation and characterization of SnS thin films for solar cell application
22. Influence of annealing temperature on the structural, topographical and optical properties of sol-gel derived ZnO thin films10.1016/j.matlet.2011.06.021 ↗
23. Effect of annealing on the structural and optical properties of InSe bilayer thin films10.1016/j.vacuum.2010.12.004 ↗
24. Optical and electrical properties of SnS semiconductor crystals grown by physical vapor deposition technique10.1016/j.physb.2010.12.068 ↗
25. Mott · 1979
26. Electrical conductivity, structure and hall effect measurements of InSe films10.1016/0040-6090(83)90202-X ↗
27. Oda · 2007
28. Photon and carrier management design for non-planar thin film copper indium gallium selenide photovoltaics10.1016/j.solmat.2016.11.008 ↗