Impact of the selenisation temperature on the structural and optical properties of CZTSe absorbers
Source abstract
Abstract
We present structural and optical spectroscopy studies of thin films of Cu2ZnSnSe4 (CZTSe) with strong copper deficiency deposited on Mo/Glass substrates and selenised at 450, 500 or 550 °C. Solar cells fabricated from these films demonstrated efficiencies up to 7.4% for selenisation at 500 °C. Structural analysis based on X-ray diffraction and Raman spectroscopy revealed the presence of SnSe2 in the film selenised at 450 °C but not detected in the films selenised at higher temperatures. A progressive decrease of the Sn and Se content was observed as the selenisation temperature increased. Photoluminescence excitation was used to determine the bandgaps at 4.2 K. Detailed measurements of the temperature and excitation intensity dependencies of the photoluminescence spectra allow the recombination mechanisms of the observed emission bands to be identified as band-to-impurity and band-to-band transitions, and their evolution with selenisation temperature changes to be analysed. The strongest band-to-band transition is recorded in the PL spectra of the film selenised at 500 °C and can be observed from 6 K to room temperature. The compositional and structural changes in the films and their influence on the optoelectronic properties of CZTSe and solar cells are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
2. Kesterites – a challenging material for solar cells10.1002/pip.2156 ↗
3. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
4. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
5. Electronic and optical properties of Cu2ZnSnS4 and Cu2ZnSnSe410.1063/1.3318468 ↗
6. The crystal structure of kesterite type compounds: a neutron and X-ray diffraction study10.1016/j.solmat.2011.01.002 ↗
7. Optical properties of high quality Cu2ZnSnSe4 thin films10.1063/1.3624827 ↗
8. Radiative recombination in Cu2ZnSnSe4 monograins studied by photoluminescence spectroscopy10.1016/j.tsf.2008.11.024 ↗
9. Photoluminescence study and observation of unusual optical transitions in Cu2ZnSnSe4/CdS/ZnO solar cells10.1016/j.solmat.2014.10.041 ↗
10. Optical spectroscopy studies of Cu2ZnSnSe4 thin films10.1016/j.tsf.2014.09.010 ↗
11. Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cells10.1063/1.4913262 ↗
12. Solid-state NMR and Raman spectroscopy to address the local structure of defects and the tricky issue of the Cu/Zn disorder in Cu-poor, Zn-rich CZTS materials10.1021/ic5012346 ↗
13. Physical and electrical characterization of high-performance Cu2ZnSnSe4 based thin film solar cells10.1016/j.tsf.2014.10.052 ↗
14. Bebb · 1972 · 8 · 181
15. M. Dimitrievska, A. Fairbrother, V. Izquierdo-Roca, A. Pérez-Rodríguez, E. Saucedo, Two ideal compositions for kesterite-based solar cell devices, In: Proceedings of the IEEE 40th Photovoltaic Specialist Conference (PVSC), IEEE, 2014, pp. 2307–2309.10.1109/PVSC.2014.6925387 ↗
16. Combinatorial exploration of the effects of intrinsic and extrinsic defects in Cu2ZnSn(S,Se)410.1109/JPHOTOV.2014.2361053 ↗
17. Detection of a ZnSe secondary phase in coevaporated Cu2ZnSnSe4 thin films10.1063/1.3558706 ↗
18. Free-carrier dynamics and band tails in Cu2ZnSn(SxSe1−x)4: evaluation of factors determining solar cell efficiency10.1103/PhysRevB.92.115204 ↗
19. The influence of precursor Cu content and two-stage processing conditions on the microstructure of Cu2ZnSnSe410.1016/j.tsf.2014.11.028 ↗
20. Systematic compositional changes and their influence on lattice and optoelectronic properties of Cu2ZnSnSe4 kesterite solar cells10.1016/j.solmat.2015.10.004 ↗
21. Evolution of phases in two-stage vacuum processed thin film Cu2ZnSnSe4 absorber layers10.1179/1433075X14Y.0000000248 ↗
22. Raman spectrum of monoclinic semiconductor Cu2SnSe310.1016/j.ssc.2010.10.015 ↗
23. Raman scattering studies of SnS2 and SnSe210.1088/0022-3719/10/8/035 ↗
24. Raman scattering crystalline assessment of polycrystalline Cu2ZnSnS4 thin films for sustainable photovoltaic technologies: phonon confinement model10.1016/j.actamat.2014.02.035 ↗
25. Optical and electric properties of SnSe2
26. Photoluminescence emission and Raman response of monolayer MoS2, MoSe2, and WSe210.1364/OE.21.004908 ↗
27. Direct observation of the transition from indirect to direct bandgap in atomically thin epitaxial MoSe2
28. Radiative recombination in Cu2ZnSnSe4 thin films with Cu deficiency and Zn excess10.1088/0022-3727/48/47/475109 ↗
29. Excitation-power dependence of the near-band-edge photoluminescence of semiconductors10.1103/PhysRevB.45.8989 ↗
30. Edge luminescence of the direct gap semiconductors10.3367/UFNr.0133.198103b.0427 ↗
31. The role of spatial potential fluctuations in the shape of the PL bands of multinary semiconductor compounds10.1238/Physica.Topical.079a00179 ↗
32. Shklovskii · 1984
33. Luckert · 2010 · 29
34. Origin of luminescence from InGaN diodes10.1103/PhysRevLett.82.237 ↗
35. The long-wavelength edge of photographic sensitivity and of the electronic absorption of solids10.1103/PhysRev.92.1324 ↗
36. The band gap of Cu2ZnSnSe4: effect of order-disorder10.1063/1.4896315 ↗
37. On conversion of luminescence into absorption and the van Roosbroeck-Shockley relation10.1063/1.4721495 ↗
38. Photoluminescence studies of heavily doped CuInTe2 crystals10.1016/S0921-4526(03)00429-0 ↗
39. Characterization of CuIn(Ga)Se2 thin films10.1002/(SICI)1521-396X(199807)168:1<163::AID-PSSA163>3.0.CO;2-T ↗
40. Influence of growth conditions on the structural quality of Cu(InGa)Se2 and CuInSe2 thin films10.1016/j.tsf.2003.11.003 ↗
41. Does the low-temperature Arrhenius plot of the photoluminescence intensity in CdTe point towards an erroneous activation energy?10.1063/1.363903 ↗
42. Temperature dependent band-gap energy for Cu2ZnSnSe4: a spectroscopic ellipsometric study10.1016/j.solmat.2014.07.039 ↗
43. Electrons in lattice fields10.1080/00018735400101213 ↗
44. Crystal structures of photovoltaic chalcogenides, an intricate puzzle to solve: the cases of CIGSe and CZTS materials10.1002/zaac.201200279 ↗
45. Thermodynamic aspects of the synthesis of thin-film materials for solar cells10.1002/cphc.201200067 ↗
46. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(Sx,Se1−x)4 based solar cells10.1016/j.tsf.2014.10.058 ↗
47. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
48. Model of native point defect equilibrium in Cu2ZnSnS4 and application to one-zone annealing10.1063/1.4819206 ↗
49. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗
50. Photoluminescence analysis of thin-film solar cells
51. Bound-exciton, free-exciton, band-acceptor, donor-acceptor, and auger recombination in GaAs10.1103/PhysRev.176.993 ↗