Comparing the degradation of organic photovoltaic devices under ISOS testing protocols
Source abstract
Abstract
Abstract In order for OPV devices to transition from the laboratory to the industrial scale, accurate measurements of device operating stability and lifetime are crucial. This paper compares the degradation of ITO/PEDOT:PSS/P3HT:ICBA/Ca/Al and ITO/MoO 3 /P3HT:ICBA/Ca/Al devices using the three main ISOS standard testing protocols: (a) ISOS-D-1, (b) ISOS-O-1 and (c) ISOS-L-1. We show that: (1) ITO/MoO 3 /P3HT:ICBA/Ca/Al devices are more stable than their PEDOT counterparts under the ISOS-D-1 protocol, as has been reported previously. (2) Under the ISOS-O-1 protocol, unencapsulated MoO 3 based devices are more stable than the equivalent PEDOT device but, when encapsulated, the degradation rates of the MoO 3 and PEDOT devices are the same. (3) By contrast, when measured under the ISOS-L protocol, the MoO 3 based devices are either equivalent to (unencapsulated devices) or, indeed, actually degrade faster (encapsulated devices) that their PEDOT counterparts. We demonstrate that these differences arise from the dominant degradation mode changing under the different protocols. As such, this paper highlights that the choice of testing protocol significantly influences the reported stability of OPV devices. In particular, the ISOS-D and ISOS-L protocols do not necessary reflect OPV device performance under actual operating conditions and thus stability measurements using these protocols should be treated with caution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Towards high performance organic photovoltaic cells: A review of recent development in organic photovoltaics10.3390/polym6092473 ↗
2. Recent progress and future aspects of organic solar cells10.1002/pip.1141 ↗
3. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
4. 10.2% power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
5. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
6. 〈〈www.solarmer.com〉〉, 〈〈http://pv-tech.org/news/_c/opv_dssc〉〉.
7. A projection of commercial-scale organic photovoltaic module costs10.1016/j.solmat.2013.07.041 ↗
8. Stability of polymer solar cells10.1002/adma.201104187 ↗
9. Recent progress in degradation and stabilization of organic solar cells10.1016/j.jpowsour.2014.04.080 ↗
10. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
11. Advanced functional polymers for increasing the stability of organic photovoltaics10.1002/macp.201300076 ↗
12. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
13. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styenensulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
14. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interface layer10.1002/adma.201100038 ↗
15. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
16. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
17. Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2010.05.043 ↗
18. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
19. Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer10.1016/j.orgel.2010.04.008 ↗
20. Efficient organic photovoltaics using solution-processed, annealing-free TiO2 nanocrystalline particles as an interface modification layer10.1016/j.orgel.2014.12.023 ↗
21. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
22. Interface modification of a highly air-stable polymer solar cell10.1016/j.solmat.2011.11.032 ↗
23. Interface materials for organic solar cells10.1039/b921624c ↗
24. Interface investigation and engineering – achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
25. Flexible, conjugated polymer-fullerene-based bulk-heterojunction solar cells: Basics, encapsulation and integration10.1557/jmr.2005.0399 ↗
26. A new encapsulation solution for flexible organic solar cells
27. Materials and methods for encapsulation of OPV: A review10.1016/j.rser.2013.06.027 ↗
28. Methods for improving lifetime performance of organic photovoltaics with low-cost encapsulation10.1002/cphc.201402749 ↗
29. Enhanced regeneration of degraded polymer solar cells by thermal annealing10.1063/1.4878408 ↗
30. Comparative study of spectral and morphological properties of blends of P3HT with PCBM and ICBA10.1016/j.orgel.2012.07.023 ↗
31. Multiple stress degradation analysis of the active layer in organic photovoltaics10.1016/j.solmat.2013.10.016 ↗
32. Stability of polymer solar cells10.1002/adma.201104187 ↗
33. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
34. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
35. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
36. Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: testing the ISOS tests10.1016/j.polymdegradstab.2014.07.013 ↗
37. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
38. On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses – the ISOS-3 inter-laboratory collaboration10.1039/c2cp40821j ↗
39. Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration10.1039/c2ee03508a ↗
40. Temperature-dependent water vapour and oxygen permeation through different polymeric materials used in photovoltaic-modules10.1002/pip.2273 ↗
41. Effect of degradation on electronic properties of polymer solar cells10.1002/pat.3125 ↗
42. Aqueous solution-processed MoO3 as an effective interfacial layer in polymer/fullerene based organic solar cells10.1016/j.orgel.2012.12.016 ↗
43. 7.9% efficient vapor-deposited organic photovoltaic cells based on a simple bulk heterojunction10.1039/C4TA02137A ↗
44. Mechanisms of photodegradation of poly(3-alkylthiophenes) in solution10.1021/ma00063a047 ↗
45. Single-crystalline orthorhombic molybdenum oxide nanobelts: synthesis and photocatalytic properties10.1039/c000744g ↗
46. Flower-like hierarchical h-MoO3: new findings of efficient visible light driven nano photocatalyst lmethylene blue degradation10.1039/c3cy20764a ↗
47. Band gap tuning of h-MoO3 nanocrystals for efficient visible light photocatalytic activity against methylene blue dye10.1166/jnn.2015.9846 ↗
48. Jasieniak · Adv. Funct. Mater. · 2012 · 22 · 259410.1002/adfm.201102622 ↗
49. Interfacial degradation in organic optoelectronics10.1039/c2ra22770c ↗