journal article·2011-02

Kelvin force microscopy studies of work function of transparent conducting ZnO:Al electrodes synthesized under varying oxygen pressures

Rafael Jaramillo, Shriram Ramanathan

Publisher page

Abstract

Abstract The ability to controllably tune the work function of transparent conductors is essential for optimizing the efficiency of thin film solar photovoltaics. Here we use Kelvin force microscopy on lithographically patterned ZnO:Al thin films to measure the dependence of the work function on oxygen content during synthesis. Films were synthesized by low temperature reactive sputtering from a Zn:Al 1.2 wt% target. At optimal oxygen content the resistivity is 3×10−4 Ω cm with nearly 90% optical transmission in the 400–1100 nm wavelength range relevant to solar photovoltaics. We find that the expected relationship between band filling and work function breaks down in the vicinity of optimal oxygen stoichiometry. For oxygen-rich ZnO:Al films we measure large work functions close to 5 eV. Our results suggest a method for fabricating transparent oxide electron conductors with large, tunable work functions that could be of relevance in designing electrodes for solid state energy conversion technologies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · ZnO doping and properties · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Transparent conductors as solar energy materials: A panoramic review10.1016/j.solmat.2007.04.031 ↗
2. Transparent conducting oxides for photovoltaics10.1557/mrs2007.29 ↗
3. Organic solar cells on indium tin oxide and aluminum doped zinc oxide anodes10.1063/1.2771050 ↗
4. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
5. An Al-doped ZnO electrode grown by highly efficient cylindrical rotating magnetron sputtering for low cost organic photovoltaics10.1088/0022-3727/43/11/115101 ↗
6. Aluminum-doped zinc oxide films as transparent conductive electrode for organic light-emitting devices10.1063/1.1605805 ↗
7. High work function of Al-doped zinc oxide thin films as transparent conductive anodes in organic light-emitting devices10.1016/j.apsusc.2006.03.032 ↗
8. Aluminum- and indium-doped zinc oxide thin films prepared by DC magnetron reactive sputtering10.1016/0165-1633(91)90007-8 ↗
9. Achieving high free electron mobility in ZnO:Al thin films grown by reactive pulsed magnetron sputtering10.1063/1.3074373 ↗
10. Material study on reactively sputtered zinc oxide for thin films silicon solar cells10.1016/j.tsf.2005.07.298 ↗
11. Magnetron sputtering of transparent conductive zinc oxide: relation between the sputtering parameters and the electronic properties10.1088/0022-3727/33/4/201 ↗
12. Surface potentials of magnetron sputtered transparent conducting oxides10.1016/j.tsf.2009.05.057 ↗
13. Deposition of transparent and conductive Al-doped ZnO thin films for photovoltaic solar cells10.1016/S0927-0248(96)00066-9 ↗
14. Carrier transport in high-efficiency ZnO/SiO2/Si solar cells10.1016/j.solmat.2006.06.026 ↗
15. Effects of the buffer layer inserted between the transparent conductive oxide anode and the organic electron donor10.1016/j.solmat.2009.11.003 ↗
16. Kelvin probe force microscopy10.1063/1.105227 ↗
17. A study of the wet etching behavior of AZO (ZnO:Al) transparent conducting film10.1016/j.apsusc.2007.10.012 ↗
18. Surface point defects and Schottky barrier formation on ZnO(1010)10.1116/1.570612 ↗
19. Band-gap tailoring of ZnO by means of heavy Al doping10.1103/PhysRevB.37.10244 ↗
20. Band-gap narrowing in heavily defect-doped ZnO10.1103/PhysRevB.25.7836 ↗
21. Nanoscale surface electrical properties of aluminum zinc oxide thin films investigated by scanning probe microscopy10.1063/1.3042237 ↗
22. Geometric artifact suppressed surface potential measurements10.1088/0957-4484/17/15/019 ↗