journal article·2013-02

Performance enhancement in inverted polymer photovoltaics with solution-processed MoO and air-plasma treatment for anode modification

Jen-Yu Sun, Wei-Hsuan Tseng, Shiang Lan, Shang-Hong Lin, Po-Ching Yang, Chih-I Wu, Ching-Fuh Lin

Publisher page

Abstract

Molybdenum oxide (MoOX) has drawn increasing attention in organic photovoltaic cells due to the large performance enhancement achieved in organic light emitting diodes. In this work, we report on inverted polymer photovoltaics (PVs) with solution-processed MoOX as anodic modification to enhance the performance of PVs. MoO3 is reduced to MoOX with x<3 after air-plasma treatment and then plays a role more closely to the thermally deposited MoOX, whose oxygen ratio is reduced during high temperature deposition. The reduced oxygen ratio provides more effective transport, thus enhancing the JSC of the devices. The PCE of the device with solution-processed MoOX is then enhanced to over 4%, which is comparable to that of thermally deposited MoOX. As a result, this work provides good compatibility for deposition of solution-process MoOX on top of polymer:fullerene blends in inverted polymer PVs to achieve better performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Polymer–Fullerene composite solar cells10.1002/anie.200702506 ↗
3. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
4. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
5. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
6. Fullerene-based acceptor materials
7. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
8. Bulk heterojunction solar cells using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:20,30-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
9. Low-bandgap conjugated polymer for high efficient photovoltaic applications10.1039/c0cc01087a ↗
10. Recent progress in polymer solar cells: manipulation of Polymer:Fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
11. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
12. Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
13. Efficient and air-stable polymer photovoltaic devices with WO3-V2O5 mixed oxides as anodic modification10.1109/LED.2009.2039846 ↗
14. Transient photovoltaic behavior of air-stable, inverted organic solar cells with solution-processed electron transport layer
15. Effect of electron transport layer crystallinity on the transient characteristics of inverted organic solar cells10.1063/1.3628319 ↗
16. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
17. Electrical and optical properties of ZnO processed by atomic layer deposition in Inverted polymer solar cells10.1021/jp106641j ↗
18. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗
19. Interface modification of a highly air-stable polymer solar cell10.1016/j.solmat.2011.11.032 ↗
20. Sol–gel processed CuOX thin film as an anode interlayer for inverted polymer solar cells10.1016/j.orgel.2010.08.009 ↗
21. Solution-processed vanadium oxide as an anode interlayer for inverted polymer solar cells hybridized with ZnO nanorods10.1016/j.orgel.2009.05.017 ↗
22. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
23. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
24. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
25. High shunt resistance in polymer solar cells comprising a MoO3 hole extraction layer processed from nanoparticle suspension10.1063/1.3601921 ↗
26. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
27. Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics10.1039/c2jm14911g ↗
28. Low-temperature, solution-processed MoOx for efficient and stable organic solar cells10.1021/am201825t ↗
29. Investigating the stability of defects in MoO3 and its role in organic solar cells10.1016/j.solmat.2011.11.041 ↗
30. MoO3 films spin-coated from a nanoparticle suspension for efficient hole-injection in organic electronics10.1002/adma.201003065 ↗
31. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
32. Influences of evaporation temperature on electronic structures and electrical properties of molybdenum oxide in organic light emitting devices10.1063/1.3309783 ↗
33. Reduced molybdenum oxide as an efficient electron injection layer in polymer light-emitting diodes10.1063/1.3557502 ↗
34. Barrierless hole injection through sub-bandgap occupied states in organic light emitting diodes using substoichiometric MoOx anode interfacial layer10.1063/1.3673283 ↗
35. Plasma-assisted processes for manufacturing nanosized powder materials10.1134/S0018143906020056 ↗