journal article·2023-01

Enhanced erosion resistance of anti-reflective TiO2/SiO2 coatings induced by Zr-oxide doping

Dario F. Zambrano-Mera, Rodrigo Espinoza-González, Andreas Rosenkranz, Terry J. Harvey, Tomas Polcar, Paulina Valenzuela, William Gacitúa

Publisher page

Abstract

The usage of renewable energy is an effective countermeasure against the occurring climatic change. In this regard, solar energy has been shown to be one of the best ways to tackle this issue. However, it has been discovered that the effectiveness of the solar panel is significantly influenced by environmental issues (dust, sand, contaminations, among others), which may induce surface erosion thus reducing the overall optical efficiency. We explored the possibility to enhance the erosion resistance for magnetron-sputtered antireflective TiO2/SiO2 coatings by Zr-oxide doping and thermal annealing. When thermally annealed at 400°C, these coatings demonstrated excellent mechanical (in dynamic conditions) and optical properties compared with the glass substrate. Moreover, laboratory sandstorm testing verified that the coating doped with 1 at.-% Zr and annealed at 400 °C displayed the highest erosion resistance (decreased erosion rate of 98 %). Consequently, doped and thermally annealed ARCs offer a unique and promising option to protect the photovoltaic glass cover against erosive wear thus enhancing the longevity and efficiency (optical and electrical) of commercially available solar panels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Erosion and Abrasive Machining · High-Temperature Coating Behaviors · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. The path towards sustainable energy10.1038/nmat4834 ↗
2. Dudley · 2020 · 65
3. 2020
4. A highly abrasive-resistant, long-lasting anti-reflective coating for PV module glass
5. Normal impact of sand particles with solar panel glass surfaces10.1016/j.triboint.2016.05.022 ↗
6. v Group · 2017
7. A review of anti-reflection and self-cleaning coatings on photovoltaic panels10.1016/j.solener.2020.01.084 ↗
8. Preparation of hydrophobic SiO2/PMHS sol and ORMOSIL antireflective films for solar glass cover10.1016/j.solener.2016.01.060 ↗
9. High-performance, single-layer antireflective optical coatings comprising mesoporous silica nanoparticles10.1021/am201494m ↗
10. Mechanically robust and self-cleaning antireflection coatings from nanoscale binding of hydrophobic silica nanoparticles10.1016/j.solmat.2019.109939 ↗
11. Solar glass with industrial porous SiO2 antireflection coating: measurements of photovoltaic module properties improvement and modelling of yearly energy yield gain10.1016/j.solmat.2003.12.004 ↗
12. A state-of-the-art review on the multifunctional self-cleaning nanostructured coatings for PV panels, CSP mirrors and related solar devices10.1016/j.rser.2022.112145 ↗
13. Self-cleaning glazing products: a state-of-the-art review and future research pathways10.1016/j.solmat.2012.09.034 ↗
14. Mechanical and microstructural properties of broadband anti-reflective TiO2/SiO2 coatings for photovoltaic applications fabricated by magnetron sputtering10.1016/j.solmat.2020.110841 ↗
15. Optical and mechanical properties of Zr-oxide doped TiO2/SiO2 anti-reflective coatings for PV glass covers10.1016/j.solmat.2022.111784 ↗
16. Functional photocatalytically active and scratch resistant antireflective coating based on TiO2 and SiO210.1016/j.apsusc.2016.01.226 ↗
17. Sand erosion on solar reflectors: accelerated simulation and comparison with field data10.1016/j.solmat.2015.10.036 ↗
18. Thompson · 2008
19. ASTM_D968-05 · 2010
20. 2021
21. Predicting the effects of sand erosion on collector surfaces in CSP plants10.1016/j.egypro.2015.03.023 ↗
22. Laboratory simulation of the surface erosion of solar glass mirrors10.1016/j.solener.2015.05.044 ↗
23. Towards a simple sand and dust abrasion and soiling prediction on solar components: design of a sand and dust accelerated abrasion chamber based on a vertical particle blower
24. Study of the effects of sand blasting on soda lime glass erosion
25. Sandstorm erosion testing of anti-reflective glass coatings for solar energy applications10.1016/j.solmat.2018.02.018 ↗
26. TiO2/SiO2 multilayer as an antireflective and protective coating deposited by microwave assisted magnetron sputtering10.2478/s11772-013-0085-7 ↗
27. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
28. Solid particle erosion mechanisms of hard protective coatings10.1016/j.surfcoat.2013.07.050 ↗
29. ASTM_G76-04 · 2004
30. 2016
31. The effect of temperature on the erosion of polyurethane coatings for wind turbine leading edge protection
32. Image thresholding by minimizing the measures of fuzziness10.1016/0031-3203(94)E0043-K ↗
33. 2012 · vol. 1 · 1
34. 2012 · vol. 37
35. The sand erosion performance of coatings10.1016/S0261-3069(99)00024-2 ↗
36. Nanoindentation of TiO2 thin films with different microstructures10.1088/0022-3727/42/14/145305 ↗
37. Mechanical and tribological properties of nanostructured TiAlN/TaN coatings deposited by DC magnetron sputtering
38. Influence of the oxygen consumption on the crystalline structure of titanium oxides thin films prepared by DC reactive magnetron sputtering10.1016/j.vacuum.2018.04.049 ↗
39. Interrelationships among macrostress, microstructure and mechanical behavior of sputtered hard Ti (Al, V) N films10.1016/j.matlet.2018.09.173 ↗
40. Structure and properties of CrSiCN coatings deposited by pulsed dc magnetron sputtering for wear and erosion protection10.1016/j.surfcoat.2015.12.068 ↗
41. Solid particle erosion mechanisms of protective coatings for aerospace applications10.1016/j.surfcoat.2014.08.037 ↗
42. Toughening of hard nanostructural thin films: a critical review10.1016/j.surfcoat.2004.10.020 ↗
43. Effect of impact angle on glass surfaces eroded by sand blasting10.1016/S0955-2219(99)00140-5 ↗
44. Using work of indentation to predict erosion behavior in bulk materials and coatings10.1088/0022-3727/39/8/023 ↗
45. UV light protection through TiO2 blocking layers for inverted organic solar cells10.1016/j.solmat.2011.08.004 ↗
46. Optical parameters induced by phase transformation in RF magnetron sputtered TiO2 nanostructured thin films10.1016/j.pnsc.2014.05.010 ↗
47. Influence of O2 partial pressure on the growth of nanostructured anatase phase TiO2 thin films prepared by DC reactive magnetron sputtering10.1016/j.matchemphys.2010.12.008 ↗
48. Single-material TiO2 double-layer antireflection coatings10.1016/S0927-0248(02)00473-7 ↗
49. Characterization of zirconia–and niobia–silica mixture coatings produced by ion-beam sputtering10.1364/AO.50.00C188 ↗
50. Photovoltaic module performance and durability following long‐term field exposure10.1002/(SICI)1099-159X(200003/04)8:2<241::AID-PIP290>3.0.CO;2-D ↗
51. Methods of deposition of hydrogenated amorphous silicon for device applications
52. Solar cells: in research and applications—a review
53. 24% efficient silicon solar cells10.1063/1.103610 ↗
54. The path to 25% silicon solar cell efficiency: history of silicon cell evolution10.1002/pip.892 ↗
55. Design, preparation, and durability of TiO2/SiO2 and ZrO2/SiO2 double-layer antireflective coatings in crystalline silicon solar modules10.1016/j.solener.2012.12.011 ↗
56. Multilayer antireflection coatings for cover glass on silicon solar modules
57. Performance and durability of broadband antireflection coatings for thin film CdTe solar cells10.1116/1.4973909 ↗