journal article·2022-03

Enhancing the photovoltaic properties of SnS-Based solar cells by crystallographic orientation engineering

Thi-Thong Ho, Efat Jokar, Shaham Quadir, Ruei-San Chen, Fang-Chen Liu, Cheng-Ying Chen, Kuei-Hsien Chen, Li-Chyong Chen

Publisher page

Abstract

Abstract Tin monosulfide (SnS) is a promising light-harvesting material for solar cell applications, owing to its potential for large-scale production, cost-effectiveness, eco-friendly source materials, and long-term stability. However, SnS crystallizes in an orthorhombic structure, which results in a highly anisotropic charge transport behavior. Tailoring the crystallographic orientation of the SnS absorber layer plays a critical role in the enhancement of the transfer of charge carriers and the power conversion efficiency (PCE). By controlling the substrate tilting angle and temperature ramp rate in vapor transport deposition, the crystal growth orientation was tuned to a preferred direction which significantly suppressed the unfavorable (040) crystallographic plane. Through the combination of these two approaches, the PCE could be increased from 0.11% to 2%. The effect of the tilting angle was numerically simulated to investigate its role in controlling the film uniformity and directing the film growth. In addition, the correlation between the texture coefficient of the (040) plane and the charge transport properties was determined by a combination of analytical methods such as device performance studies, electrochemical impedance spectroscopy, along with transient photovoltage, space-charge-limited current, and dark current measurements. These techniques were blended together to prove that the marked improvement in PCE can be ascribed to a reduced charge recombination (in both SnS bulk and interfaces) and an enhanced hole mobility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
2. The steady rise of kesterite solar cells10.1021/acsenergylett.7b00131 ↗
3. Overcoming efficiency limitations of SnS-based solar cells10.1002/aenm.201400496 ↗
4. Kinetically controlled growth of phase-pure SnS absorbers for thin film solar cells: achieving efficiency near 3% with long-term stability using an SnS/CdS heterojunction10.1002/aenm.201702605 ↗
5. Non-cubic solar cell materials10.1038/nphoton.2015.85 ↗
6. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
7. Orientation engineering in low-dimensional crystal-structural materials via seed screening10.1002/adma.201903914 ↗
8. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
9. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10%efficiency10.1038/s41560-020-0652-3 ↗
10. Evidence for self-healing benign grain boundaries and a highly defective Sb2Se3–CdS interfacial layer in Sb2Se3 thin-film photovoltaics10.1021/acsami.0c03690 ↗
11. High-performance phase-pure SnS photocathodes for photoelectrochemical water splitting obtained via molecular ink-derived seed-assisted growth of nanoplates10.1021/acsami.9b23045 ↗
12. Influence of seed layer orientation on the growth and physical properties of SnS nanostructures, Nanostructures10.1007/s00339-013-8204-3 ↗
13. Structural stability and electronic properties of low-index surfaces of SnS10.1063/1.4874775 ↗
14. Characterization of vacuum-evaporated tin sulfide film for solar cell materials10.1016/0927-0248(94)90158-9 ↗
15. Fabrication of CdS/SnS heterojunction for photovoltaic application
16. Polymorphic tin sulfide thin films of zinc blende and orthorhombic structures by chemical deposition10.1149/1.2917198 ↗
17. Structural and optical properties of SnS semiconductor films produced by chemical bath deposition10.1088/0022-3727/42/24/245408 ↗
18. Preparation of SnS films with zinc blende structure by successive ionic layer adsorption and reaction method10.1016/j.matlet.2010.07.002 ↗
19. Efficient nanostructured TiO2/SnS heterojunction solar cells10.1002/aenm.201901343 ↗
20. Electrochemical deposition of SnS thin films10.1016/S0040-6090(99)00798-1 ↗
21. Chemistry of tin monosulfide (δ-SnS)Electrodeposition :effects ofpH and temperature with tartaric acid10.1149/1.2801867 ↗
22. Tin sulfide thin films by pulse electrodeposition: structural, morphological, and optical properties10.1149/1.3289318 ↗
23. Pulsed electrodeposition of oxygen-free tin monosulfide thin films using lactic acid/sodium lactate buffered electrolytes10.1016/j.tsf.2010.08.138 ↗
24. Optimization of photoconductivity in vacuum-evaporated tin sulfide thin films10.1088/0268-1242/14/6/303 ↗
25. Microstructure dependent physical properties of evaporated tin sulfide films10.1063/1.2216790 ↗
26. 3.88% efficient tin sulfide solar cells using congruent thermal evaporation10.1002/adma.201402219 ↗
27. Impact of growth temperature on the properties of SnS film prepared by thermal evaporation and its photovoltaic performance10.1016/j.cap.2015.03.026 ↗
28. Development of sulphurized SnS thin film solar cells10.1016/j.cap.2015.01.022 ↗
29. Postdeposition processing of SnS thin films and solar cells: prospective strategy to obtain large, sintered, and doped SnS grains by recrystallization in the presence of a metal Halide flux10.1021/acsami.9b03213 ↗
30. Vapor transport deposition and epitaxy of orthorhombic SnS on glass and NaCl Substrates10.1063/1.4816746 ↗
31. Influence of the temperature ramping rate on the performance of vapor transport deposited SnS thin-film solar cells10.1021/acsaem.0c01164 ↗
32. Achieving over 4% efficiency for SnS/CdS thin-film solar cells by improving the heterojunction interface quality10.1039/D0TA06937J ↗
33. Atomic layer deposition of tin monosulfide thin films10.1002/aenm.201100330 ↗
34. Role of kinetic factors in chemical vapor deposition synthesis of uniform large area graphene using copper catalyst10.1021/nl102355e ↗
35. Substrate control for large area continuous films of monolayer MoS2 by atmospheric pressure chemical vapor deposition
36. Vapor transport deposited tin monosulfide for thin-film solar cells: effect of deposition temperature and duration10.1039/C8TA09820D ↗
37. Hysteresis-free multi-walled carbon nanotube-based perovskite solar cells with a high fill factor10.1039/C5TA07714A ↗
38. In situ growth of [hk1]-Oriented Sb2S3 for solution-processed planar heterojunction solar cell with 6.4% efficiency
39. Evaluation of the CdS/CdTe heterojunction solar cell10.1063/1.323429 ↗
40. Dependence of dark current on zinc concentration in ZnxCd1−xS/ZnTe heterojunctions10.1016/0927-0248(93)90067-D ↗
41. Non-approximated series resistance evaluation by considering high ideality factor in organic solar cell10.1063/1.5053584 ↗
42. Experimental determination of vacuum-level band alignments of SnS-based solar cells by photoelectron yield spectroscopy10.1063/1.4866992 ↗