journal article·2009-10

Efficient hybrid bulk heterojunction solar cells based on phenylenevinylene copolymer, perylene bisimide and TiO2

John A. Mikroyannidis, Minas M. Stylianakis, P. Suresh, G.D. Sharma

Publisher page

Abstract

Abstract A soluble alternating phenylenevinylene copolymer P containing a side anthracene, which was attached to the thiophene ring via a vinylene bridge, was synthesized by Heck coupling. The copolymer had relatively low glass transition temperature (61 °C) and decomposed above 400 °C. The absorption maximum of P was located at 387–402 nm with an optical band gap of 2.32 eV. The emission spectra of P indicated that an intramolecular energy transfer from the side anthracene to the main chain took place via the vinylene bridge. In addition, a new symmetrical compound A based on perylene–anthracene was synthesized and used as electron acceptor in the device. Photovoltaic devices were fabricated using a blend of copolymer P as donor and compound A as acceptor, as photoactive layer film sandwiched between indium tin oxide-coated glass and Al electrodes. This device showed a power conversion efficiency of 0.72%. However, when TiO2 nanoparticles were incorporated on the pristine P:A blend, the power conversion efficiency of the device was enhanced up to 1.32%, which is attributed to the enhanced photoinduced excitons due to the increase of the interfacial area and improved charge carrier mobility. The power conversion efficiency of the P:A:TiO2 based photovoltaic device was further improved up to 2.64%, when the hybrid composite was treated with a mixture of Li salt and 4-tert-butylpyridine, which is attributed to the reduction in the recombination of charge carriers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Semiconducting and metallic polymers: the fourth generation of polymeric materials10.1021/jp011611w ↗
2. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
3. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
4. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
5. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
6. Disclosure of the nanostructure of MDMO-PPV:PCBM bulk hetero-junction organic solar cells by a combination of SPM and TEM10.1016/S0379-6779(02)01311-5 ↗
7. N.S. Saraciftci nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗
8. Polymer solar cells based on MEH-PPV and PCBM10.1016/S0379-6779(02)01059-7 ↗
9. Meso-structure formation for enhanced organic photovoltaic cells10.1021/ol051950y ↗
10. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
11. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
12. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
13. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
14. Hybrid polymer-metal oxide thin films for photovoltaic applications10.1039/b706547g ↗
15. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
16. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
17. Bert, small bandgap polymers for organic solar cells (polymer material development in the last 5 years)10.1080/15583720802231833 ↗
18. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
19. Photoinduced charge generation and recombination dynamics in model donor/acceptor pairs for organic solar cell applications: a full quantum-chemical treatment10.1021/ja042390l ↗
20. Hybrid organic-nanocrystal solar cells10.1557/mrs2005.8 ↗
21. Influence of solvent on film morphology and device performance of poly(3-hexylthiophene):TiO2 nanocomposite solar cells10.1016/j.cplett.2003.12.045 ↗
22. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
23. Device operation of conjugated polymer/zinc oxide bulk heterojunction solar cells10.1002/adfm.200600371 ↗
24. Hybrid solar cells from regioregular polythiophene and ZnO nanoparticles10.1002/adfm.200500573 ↗
25. 1. Hybrid polymer/Zinc Oxide photovoltaic devices with vertically oriented ZnO nanorods and an amphiphilic molecular interface Layer10.1021/jp0571372 ↗
26. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
27. Photovoltaic devices using blends of branched CdSe nanoparticles and conjugated polymers10.1021/nl0342895 ↗
28. Vertically segregated hybrid blends for photovoltaic devices with improved efficiency10.1063/1.1804613 ↗
29. Photovoltaic cells made from conjugated polymers infiltrated into mesoporous titania10.1063/1.1616197 ↗
30. Infiltrating semiconducting polymers into self-assembled mesoporous titania films for photovoltaic applications10.1002/adfm.200304361 ↗
31. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
32. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
33. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
34. A roll-to-roll process to flexible polymer solar cells model studies, manufacture and operation stability studies10.1039/b823001c ↗
35. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
36. Bulk heteronjuction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
37. Attaching perylene dyes to polyfluorene: three simple efficient methods for facile color tuning of light-emitting polymers10.1021/ja0205784 ↗
38. Electroluminescent diodes from complementary discotic benzoperylenes10.1002/cphc.200300734 ↗
39. Assembly and characterization of novel hydrogen-bond-induced nanoscale rods10.1021/jo0486037 ↗
40. Effects of functional groups at perylene diimide derivatives on organic photovoltaic device application10.1039/B512983D ↗
41. Picosecond optical switching based on biphotonic excitation of an electron donor–acceptor–donor molecule10.1126/science.257.5066.63 ↗
42. A single-molecule probe based on intramolecular electron transfer10.1021/ja0268074 ↗
43. Photoinduced electron transfer in hydrogen-bonded oligo(p-phenylene vinylene)-perylene bisimide chiral assemblies10.1021/ja020378s ↗
44. Synthesis, optical properties and aggregation behavior of a triad system based on perylene and oligo(p-phenylene vinylene) units10.1002/1521-3765(20020802)8:15<3353::AID-CHEM3353>3.0.CO;2-X ↗
45. Novel anthracene-core molecule for the development of efficient PCBM-based solar cells10.1021/cm703011k ↗
46. Polythiophene derivative with phenothiazine-vinylene conjugated side chain: synthesis and its application in field-effect transistors10.1021/ma071402v ↗
47. Synthesis of functionalized styrenes via palladium-catalyzed coupling of aryl bromides with vinyl tin reagents10.1021/jo00379a020 ↗
48. New polyphenylene- and polyphenylenevinylene-based copolymers containing triarylpyrazoline units in the main chains10.1002/pola.21929 ↗
49. Preparation and characterization of regioisomerically pure 1,7-disubstituted perylene bisimide dyes10.1021/jo048880d ↗
50. Electrochemical and optical properties of novel donor–acceptor thiophene–perylene–thiophene polymers10.1002/pola.22532 ↗
51. Asymmetric control in Diels–Alder cycloadditions of chiral 9-aminoanthracenes by relay of stereochemical information10.1016/j.tetasy.2007.04.012 ↗
52. O.I. Kolodiazhnyi, Phosphorus Ylides, Wiley Interscience, New York, 1999.10.1002/9783527613908 ↗
53. S. Patai, F.R. Hartley, The Chemistry of organophosphorus compounds, Wiley Interscience, New York, vol. 3, 1994.
54. J.I.G. Cadogan, Organophosphorus reagents in organic synthesis, Academic press, London, 1979.
55. Palladium-catalyzed vinylic substitution with highly activated aryl halides10.1021/jo00409a001 ↗
56. Structure control of π-conjugated polymers for enhanced solid-state luminescence: synthesis and liquid crystalline and photophysical properties of new bulky poly(p-phenylenevinylene)s and oligo(phenylenevinylene)s bearing tricyclodecane pendants10.1021/ma062764q ↗
57. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
58. Novel saturated red-emitting poly(p-phenylenevinylene) copolymers with narrow-band-gap units of 2,1,3-benzothiadiazole synthesized by a palladium-catalyzed stille coupling reaction10.1002/pola.20702 ↗
59. Synthesis and properties of polythiophene derivatives containing triphenylamine moiety and their photovoltaic applications10.1002/pola.22737 ↗
60. Branched poly(thienylene vinylene)s with absorption spectra covering the whole visible region10.1021/ma060662u ↗
61. Effective tuning of HOMO and LUMO energy levels by p–n diblock and triblock oligomer approaches10.1021/jo0521596 ↗
62. Effects of functional groups at perylene diimide derivatives on organic photovoltaic device application10.1039/B512983D ↗
63. Photoluminescent and electrochemical properties of novel copoly(aryl ether)s with isolated fluorophores10.1002/pola.11040 ↗
64. High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination10.1063/1.1406148 ↗
65. Parameters influencing charge separation in solid-state dye-sensitized solar cells using novel hole conductors10.1002/adfm.200500748 ↗