Optimum silver contact sputtering parameters for efficient perovskite solar cell fabrication
Source abstract
Abstract
The use of magnetron sputtering for deposition of the metal electrode in perovskite solar cells has been limited because of the damage to the organic hole transport layer by high kinetic energy particles during the sputtering process. In this paper, a systematic investigation into the effect of sputtering power, argon flow rate, sputtering duration, and argon pressure on the performance of the perovskite cells was conducted. The results of this work show that high power conversion efficiency of 18.35% was obtained for solution-processed, air-fabricated perovskite solar cells with Ag contact prepared using magnetron sputtering. The devices also exhibit an excellent short-current density of 22.56 mA/cm2, an open-circuit voltage of 1.10 V and a fill factor of 73.7%. The investigation reveals that sputtering power is the most critical factor that needs to be carefully controlled to minimise the damage to the hole transport layer. This study demonstrates that highly efficient perovskite solar cells can be fabricated using magnetron sputtering if the sputtering parameters are optimised.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Titanium-defected undoped anatase TiO2with p-type conductivity, room-temperature ferromagnetism, and remarkable photocatalytic performance10.1021/ja512047k ↗
2. Highly reproducible organometallic halide perovskite microdevices based on top-down lithography
3. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
4. Effective approach for reducing the migration of ions and improving the stability of organic-inorganic perovskite solar cells10.1016/j.jallcom.2018.01.082 ↗
5. Efficiency enhancement of perovskite solar cells using structural and morphological improvement of CH3NH3PbI3 absorber layers10.1088/2053-1591/aaa616 ↗
6. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
7. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
8. Surface passivation of perovskite film for efficient solar cells
9. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
10. 2020 · vol. 1
11. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
12. Iodide management in formamidinium-lead-halide – based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
13. Large guanidinium cation mixed with methylammonium in lead iodide perovskites for 19% efficient solar cells10.1038/s41560-017-0054-3 ↗
14. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells10.1002/adfm.201706923 ↗
15. Mixed cations and mixed halide perovskite solar cell with lead thiocyanate additive for high efficiency and long-term moisture stability10.1016/j.orgel.2017.11.045 ↗
16. Efficient and stable CH3NH3PbI3-x(SCN)x planar perovskite solar cells fabricated in ambient air with low-temperature process10.1016/j.jpowsour.2017.11.070 ↗
17. Humidity-insensitive fabrication of efficient perovskite solar cells in ambient air10.1016/j.jpowsour.2018.11.013 ↗
18. Hysteresis-less CsPbI2Br mesoscopic perovskite solar cells with a high open-circuit voltage exceeding 1.3 v and 14.86% of power conversion efficiency10.1021/acsami.9b03413 ↗
19. Comparison of the Al back contact deposited by sputtering, e-beam, or thermal evaporation for inverted perovskite solar cells10.1088/1361-6463/aab0d8 ↗
20. Efficient planar perovskite solar cells via a sputtered cathode10.1002/solr.201900209 ↗
21. Experimental design approach for deposition optimization of RF sputtered chalcogenide thin films devoted to environmental optical sensors10.1038/s41598-017-03678-w ↗
22. Combined magnetron sputtering and pulsed laser deposition of TiO2 and BFCO thin films10.1038/s41598-017-02284-0 ↗
23. Influence of hole transport material/metal contact interface on perovskite solar cells10.1088/1361-6528/aab795 ↗
24. Non-precious transition metals as counter electrode of perovskite solar cells10.1016/j.ensm.2016.11.007 ↗
25. A study on utilizing different metals as the back contact of CH3NH3PbI3 perovskite solar cells10.1039/C6TA05938D ↗
26. Highly efficient perovskite solar cells based on mechanically durable molybdenum cathode10.1016/j.nanoen.2015.07.025 ↗
27. Nickel-cathoded perovskite solar cells10.1021/jp506991x ↗
28. Metal ions diffusion at heterojunction chromium oxide/CH3NH3PbI3 interface on the stability of perovskite solar cells10.1016/j.surfin.2017.12.006 ↗
29. Mesoporous Zn2SnO4 as effective electron transport materials for high-performance perovskite solar cells10.1016/j.electacta.2017.08.083 ↗
30. Inorganic p-type semiconductors: their applications and progress in dye-sensitized solar cells and perovskite solar cells
31. Surface coverage enhancement of a mixed halide perovskite film by using an UV-ozone treatment10.3938/jkps.69.406 ↗
32. Efficient perovskite solar cells depending on TiO2 nanorod arrays10.1021/acsami.6b05971 ↗
33. Organic-Inorganic hybrid perovskite materials for “nova star” solar cells: state of Technology and outstanding challenges
34. A study of inverted-type perovskite solar cells with various composition ratios of (FAPbI3)1−x(MAPbBr3)x10.3390/nano6100183 ↗
35. Improving the stability and decreasing the trap state density of mixed-cation perovskite solar cells through compositional engineering
36. Sol-gel synthesis of Sr-doped SnO 2 thin films and their photocatalytic properties10.1088/2053-1591/aa8deb ↗
37. Charge injection, carriers recombination and HOMO energy level relationship in perovskite solar cells10.1038/s41598-017-06245-5 ↗
38. Constructing efficient and stable perovskite solar cells via interconnecting perovskite grains10.1021/acsami.7b08488 ↗
39. Efficiency enhancement of perovskite solar cells via electrospun CuO nanowires as buffer layers
40. Perovskites fabricated with volatile anti-solvents for more efficient solar cells10.1016/j.molstruc.2018.08.021 ↗
41. Surface engineering of perovskite films for efficient solar cells
42. Nelson · 2003
43. Promising photovoltaic application of multi-walled carbon nanotubes in perovskites solar cells for retarding recombination10.1039/C6RA04743B ↗