Effects of different Cs distribution in the film on the performance of CIGS thin film solar cells
Source abstract
Abstract
Abstract The post deposition treatment of CsF (CsF-PDT) plays an important role in improving the performance of CIGS solar cells. However, the doping mechanism of Cs-PDT is controversial. To further clarify it, the material properties of the CIGS thin film and photovoltaic characteristics of the devices with different amount of CsF doping are investigated in this paper. It can be demonstrated that the surface morphology, chemical properties and electrical structure of the absorber after CsF-PDT are similar to those of samples after KF-PDT and RbF-PDT. Especially, analogous wide band gap compound CsInSe2 is formed at the surface of the absorber, which can significantly reduce the interfacial recombination between the buffer layer and absorber. However, the measurement results indicate that the distribution and role of Cs in the absorber are somewhat different from those previously reported. Firstly, the entry of Cs does not promote the reduction of Na, but makes more Na enter the absorber. Secondly, the Cs atoms entering the film not only locate at the grain boundary but also enter the grains. Therefore, they can passivate the defects both at the grain boundary and grain interior, improving the hole carrier concentration and minority carrier lifetime. Finally, when excess Cs atoms enter the grain, the lattice constants and texture of the film transform significantly. In this case, the new defects (40 meV and 420 meV) will be generated in the film, which deteriorates the device performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
4. Effects of rubidium fluoride and potassium fluoride postdeposition treatments on Cu(In,Ga)Se2 thin films and solar cell performance
5. KF post deposition treatment in co-evaporated Cu(In,Ga)Se2, thin film solar cells: beneficial or detrimental effect induced by the absorber characteristics10.1002/pip.2924 ↗
6. Elucidating the mechanism of an RbF post deposition treatment in CIGS thin film solar cells10.1002/solr.201800156 ↗
7. Group III elemental composition dependence of RbF postdeposition treatment effects on Cu(In,Ga)Se2 thin films and solar cells10.1021/acs.jpcc.8b00079 ↗
8. Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto soda lime glass substrates10.1016/j.solmat.2016.06.023 ↗
9. Effects of the incorporation of alkali elements on Cu(In,Ga)Se2 thin film solar cells10.1016/j.solmat.2016.07.015 ↗
10. Chemistry of K in Cu(In,Ga)Se2 photovoltaic absorbers: effects of temperature on Cu-K-In-Se films10.1016/j.jallcom.2017.08.019 ↗
11. Similarities and critical differences in heavy alkali-metal rubidium and cesium effects on chalcopyrite Cu(In,Ga)Se2 thin-film solar cells10.1021/acs.jpcc.9b06042 ↗
12. Effect of heat‐bias soaking on cesium fluoride‐treated CIGS thin film solar cells10.1002/pip.3067 ↗
13. Passivation of deep-level defects by cesium fluoride post-deposition treatment for Improved device performance of Cu (In,Ga) Se2 solar cells10.1021/acsami.9b08316 ↗
14. Proton irradiation on cesium‐fluoride‐free and cesium‐fluoride‐treated Cu (In, Ga) Se2 solar cells and annealing effects under Illumination10.1002/pssr.201900519 ↗
15. Alkali-induced grain boundary reconstruction on Cu(In,Ga)Se2 thin film solar cells using cesium fluoride post deposition treatment
16. Heavy alkali treatment of Cu(In,Ga)Se2 solar cells: surface versus bulk effects10.1002/aenm.201903752 ↗
17. Effects of KF and RbF post deposition treatments on the growth of the CdS buffer layer on CIGS thin films - a comparative study10.1016/j.solmat.2019.109997 ↗
18. Cu-rich CuInSe2 solar cells with a Cu-poor surface10.1002/pip.2493 ↗
19. Fermi level-dependent defect formation at Cu(In,Ga)Se2 interfaces10.1016/S0169-4332(00)00484-0 ↗
20. Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devices10.1063/1.370758 ↗
21. Do we really need another PL study of CuInSe2
22. Effect of alkali metal atom doping on the CuInSe2 based solar cell absorber10.1021/acs.jpcc.7b03083 ↗
23. Influence of KF post deposition treatment on the polycrystalline Cu (In, Ga)Se2/CdS heterojunction formation for photovoltaic application
24. Photoluminescence and X-ray fluorescence measurements of successively thinned CuGaSe2 films10.1016/S0040-6090(99)00839-1 ↗
25. Direct insights into RbInSe2 formation at Cu(In,Ga)Se2 thin film surface with RbF postdeposition treatment10.1063/1.5044244 ↗
26. Potassium postdeposition treatment-induced band gap widening at Cu (In, Ga) Se2 surfaces reason for performance leap10.1021/acsami.5b09231 ↗
27. Photoemission studies on Cu (In, Ga) Se2 thin films and related binary selenides10.1016/S0169-4332(96)00099-2 ↗
28. Impact of a RbF postdeposition treatment on the electronic structure of the CdS/Cu(In,Ga)Se2 heterojunction in high-efficiency Thin-film solar cells10.1021/acsenergylett.7b00720 ↗
29. Experimental indication for band gap widening of chalcopyrite solar cell absorbers after potassium fluoride treatment10.1063/1.4892882 ↗
30. Features of KF and NaF postdeposition treatments of Cu(In,Ga)Se2 absorbers for high efficiency thin film solar cells10.1021/acs.chemmater.5b02335 ↗
31. Effect of alkali metal atom doping on the CuInSe2 based solar cell absorber10.1021/acs.jpcc.7b03083 ↗
32. Surface and bulk effects of K in Cu1−xKxIn1−yGaySe2 solar cells10.1016/j.solmat.2017.12.038 ↗
33. Chemistry of K in Cu(In,Ga)Se2 photovoltaic absorbers: effects of temperature on Cu-K-In-Se films10.1016/j.jallcom.2017.08.019 ↗
34. Nanoscale control of grain boundary potential barrier, dopant density and filled trap state density for higher efficiency perovskite solar cells
35. Unveiling the effects of post-deposition treatment with different alkaline elements on the electronic properties of CIGS thin film solar cells10.1039/c4cp00614c ↗
36. Rotational design of charge carrier transport layers for optimal antimony trisulfide solar cells and its integration in tandem devices10.1016/j.solmat.2019.110279 ↗
37. Photoluminescence and X-ray fluorescence measurements of successively thinned CuGaSe2 films10.1016/S0040-6090(99)00839-1 ↗
38. Photoemission studies on Cu (In, Ga) Se2 thin films and related binary selenides10.1016/S0169-4332(96)00099-2 ↗
39. Over 14% efficiency of directly sputtered Cu (In, Ga) Se2 absorbers without postselenization by post‐treatment of alkali metals10.1002/aenm.201602571 ↗
40. On the role of Na and modifications to Cu(In,Ga)Se2 absorber materials using thin-MF (M=Na, K, Cs) precursor layers
41. Effects of double cation substitution in solution-processed CZTS solar cells with over 10% efficiency10.1002/aenm.201802540 ↗
42. Device and material characterization of Cu(InGa)Se2 solar cells with increasing band gap10.1063/1.361431 ↗
43. Current loss due to recombination in Cu-rich CuInSe2 solar cells
44. Hybrid-functional calculations on the incorporation of Na and K impurities into the CuInSe2 and CuIn5Se8 solar-cell materials
45. Alkali treatments of Cu(In,Ga)Se2 thin-film absorbers and their impact on transport barriers10.1002/pip.3032 ↗