Inverted CsPbI2Br perovskite solar cells with enhanced efficiency and stability in ambient atmosphere via formamidinium incorporation
Source abstract
Abstract
Abstract CsPbI2Br is one of candidates of the top layer for the all perovskite tandem solar cells. However, the perovskite is prone to change the phase from α (black) to δ (yellow) type. In this research, Cs1-xFAxPbI2Br perovskites were fabricated in an ambient atmosphere, and their properties immediately after the fabrication and the phase stability were investigated. The quality of the perovskite films was enhanced and the trap density was reduced after the incorporation of the FA cations. The phase stability of the Cs1-xFAxPbI2Br perovskite was effectively enhanced. Consequently, the highest power conversion efficiency of 12.28% with open-circuit voltage (Voc) of 1.09 V, current intensity (Jsc) of 15.65 mA cm−2, and fill factor of 72% in the planar solar cell based on Cs0.7FA0.3PbI2Br perovskite is reported. The bandgap was optimized to be about 1.82 eV suitable for all perovskite tandem top layer. Most importantly, all the photovoltaic parameters of Cs0.7FA0.3PbI2Br perovskite solar cells showed ignorable decay after 2 months’ measurement in an ambient atmosphere with the presence of air and humidity without encapsulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Structured crystallization for efficient all-inorganic perovskite solar cells with high phase stability10.1039/C9TA05556H ↗
2. Toward long-term stability: single-crystal alloys of cesium-containing mixed cation and mixed halide perovskite10.1021/jacs.8b11610 ↗
3. Stable inverted planar perovskite solar cells with low‐temperature‐processed hole‐transport bilayer10.1002/aenm.201700763 ↗
4. Formamidinium and cesium hybridization for photo‐ and moisture‐stable perovskite solar cell10.1002/aenm.201501310 ↗
5. All-inorganic CsPbI2Br perovskite solar cells with high efficiency exceeding 13%10.1021/jacs.7b13229 ↗
6. Highly efficient all-inorganic perovskite solar cells with suppressed non-radiative recombination by a Lewis base
7. Grain engineering for perovskite/silicon monolithic tandem solar cells with efficiency of 25.4%10.1016/j.joule.2018.10.003 ↗
8. Selecting tandem partners for silicon solar cells10.1038/nenergy.2016.137 ↗
9. Organic interfacial materials for perovskite-based optoelectronic devices
10. Highly efficient perovskite–perovskite tandem solar cells reaching 80% of the theoretical limit in photovoltage10.1002/adma.201702140 ↗
11. Wide-bandgap, low-bandgap, and tandem perovskite solar cells10.1088/1361-6641/ab27f7 ↗
12. High-efficiency tandem perovskite solar cells10.1557/mrs.2015.167 ↗
13. Strain relaxation and light management in tin–lead perovskite solar cells to achieve high efficiencies10.1021/acsenergylett.9b01237 ↗
14. All‐inorganic CsPb1−x gex I2Br perovskite with enhanced phase stability and photovoltaic performance10.1002/ange.201807270 ↗
15. All‐inorganic CsPbX3 perovskite solar cells: progress and prospects10.1002/anie.201901081 ↗
16. Tailoring C60 for efficient inorganic CsPbI2Br perovskite solar cells and modules10.1002/adma.201907361 ↗
17. Interfacial energy level tuning for efficient and thermostable CsPbI2Br perovskite solar cells10.1002/advs.201901952 ↗
18. Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers10.1039/C5EE02194D ↗
19. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
20. Morphology control of the perovskite thin films via the surface modification of nickel oxide nanoparticles layer using a bidentate chelating ligand 2,2’-Bipyridine10.1016/j.synthmet.2019.116197 ↗
21. High efficiency mesoscopic solar cells using CsPbI3 perovskite quantum dots enabled by chemical interface engineering10.1021/jacs.9b10700 ↗
22. Coexisting CsPbCl3: CsPbI3 perovskite nanocrystal glasses with high luminescence and stability10.1016/j.cej.2019.123415 ↗
23. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗
24. Ligand-assisted cation-exchange engineering for high-efficiency colloidal Cs 1-x FA x PbI3 quantum dot solar cells with reduced phase segregation10.1038/s41560-019-0535-7 ↗
25. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
26. Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
27. Effects of alloying on the optical properties of organic–inorganic lead halide perovskite thin films10.1039/C6TC02135B ↗
28. Inhomogeneous doping of perovskite materials by dopants from hole-transport layer10.1016/j.matt.2019.10.005 ↗
29. Entropic stabilization of mixed A-cation ABX3 metal halide perovskites for high performance perovskite solar cells†10.1039/C5EE03255E ↗
30. Sequential introduction of cations deriving large‐grain csx FA1-x PbI3 thin film for planar hybrid solar cells: insight into phase‐segregation and thermal‐healing behavior10.1002/smll.201603225 ↗
31. Methylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗
32. Benzylamine‐treated wide‐bandgap perovskite with high thermal‐photostability and photovoltaic performance10.1002/aenm.201701048 ↗
33. Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys10.1021/acs.chemmater.5b04107 ↗
34. The renaissance of halide perovskites and their evolution as emerging semiconductors10.1021/acs.accounts.5b00229 ↗
35. Phase segregation enhanced ion movement in efficient inorganic CsPbIBr2 solar cells10.1002/aenm.201700946 ↗
36. Bandgap‐Tunable cesium lead halide perovskites with high thermal stability for efficient solar cells10.1002/aenm.201502458 ↗
37. Inorganic caesium lead iodide perovskite solar cells†10.1039/C5TA06398A ↗
38. Stable and reproducible 2D/3D formamidinium–lead–iodide perovskite solar cells10.1021/acsaem.8b01964 ↗
39. Improving the performance of formamidinium and cesium lead triiodide perovskite solar cells using lead thiocyanate additives10.1002/cssc.201601027 ↗
40. Formamidinium + cesium lead triiodide perovskites: discrepancies between thin film optical absorption and solar cell efficiency10.1016/j.solmat.2018.09.002 ↗
41. Vapor-assisted ex-situ doping of carbon nanotube toward efficient and stable perovskite solar cells10.1021/acs.nanolett.8b04190 ↗
42. Inverted all-inorganic CsPbI2Br perovskite solar cells with promoted efficiency and stability by nickel incorporation10.1021/acs.chemmater.9b03277 ↗
43. Mixed a-cation perovskites for solar cells: atomic-scale insights into structural distortion, hydrogen bonding, and electronic properties10.1021/acs.chemmater.8b01851 ↗
44. Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells10.1039/C7EE01675A ↗
45. Stabilizing the efficiency beyond 20% with a mixed cation perovskite solar cell fabricated in ambient air under controlled humidity10.1002/aenm.201700677 ↗
46. Relationship between lattice strain and efficiency for Sn-perovskite solar cells10.1021/acsami.9b09564 ↗
47. Robust tin‐based perovskite solar cells with hybrid organic cations to attain efficiency approaching 10%10.1002/adma.201804835 ↗