Amphoteric imidazole doping induced large-grained perovskite with reduced defect density for high performance inverted solar cells
Source abstract
Abstract
Abstract Intrinsic defect density in polycrystalline halide perovskite films are required to be low enough to suppress charge recombination loss for improvement in performance of perovskite solar cells (PeSCs). In this paper, we propose the use of amphoteric imidazole to achieve high crystalline quality of CH3NH3PbI3 perovskite absorption layer. The imidazole additive plays a synergistic role in controlling the perovskite crystal growth for large grain size and passivating the uncoordinated ions (e.g., Pb2+) defects, resulting in improved carrier transport/lifetime and suppressed non-radiative recombination. The champion power conversion efficiency (PCE) of PeSCs with imidazole is improved to 16.88%, from the control device with a PCE value of 14.65%. Besides, the stability of imidazole modified perovskite films is further improved by limiting ion immigration at grain boundaries against moisture and heat stresses. The findings pave an avenue for synergistically modulating crystallization and healing defect in perovskite to achieve efficient and stable solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
2. Towards stable and commercially available perovskite solar cells10.1038/nenergy.2016.152 ↗
3. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic10.1021/ja809598r ↗
5. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
6. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
7. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
8. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
9. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
10. A strategy to simplify the preparation process of perovskite solar cells by co-deposition of a hole-conductor and a perovskite Layer10.1002/adma.201603850 ↗
11. Carrier lifetimes of >1 ms in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells10.1126/science.aav7911 ↗
12. A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
13. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
14. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
15. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
16. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
17. Low-temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells10.1021/nl403997a ↗
18. Ammonia-treated graphene oxide and PEDOT:PSS as hole transport layer for high-performance perovskite solar cells with enhanced stability10.1016/j.orgel.2019.03.048 ↗
19. A simple perylene derivative as a solution-processable cathode interlayer for perovskite solar cells with enhanced efficiency and stability10.1021/acsami.8b02256 ↗
20. Perovskite solar cell with an efficient tiO2 Compact Film10.1021/am503728d ↗
21. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
22. Improved performance and reproducibility of perovskite solar cells by well-soluble tris(pentafluorophenyl)borane as a p-type dopant10.1021/acsami.7b02969 ↗
23. Enhanced efficiency of planar heterojunction perovskite solar cells by a light soaking treatment on tris(pentafluorophenyl)borane-doped poly(triarylamine) solution10.1021/acsami.8b18663 ↗
24. Defects in perovskite-halides and their effects in solar cells, Nat
25. Carrier trapping and recombination: the role of defect physics in enhancing the open circuit voltage of metal halide perovskite solar cells10.1039/C6EE01729K ↗
26. Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering10.1039/C7CS00868F ↗
27. Strong covalency-induced recombination centers in perovskite solar cell material CH3NH3PbI310.1021/ja5079305 ↗
28. Perovskite solar cells must come of age10.1126/science.aar5684 ↗
29. Probing the origins of photodegradation in organic–inorganic metal halide perovskites with time-resolved mass spectrometry10.1039/C8SE00358K ↗
30. Photodecomposition and morphology evolution of organometal halide perovskite solar cells10.1021/acs.jpcc.5b06269 ↗
31. In situ observation of heat-induced degradation of perovskite solar cells10.1038/nenergy.2015.12 ↗
32. Degradation observations of encapsulated planar CH3NH3PbI3 perovskite solar cells at high temperatures and humidity10.1039/C5TA00358J ↗
33. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system10.1002/aenm.201600846 ↗
34. Humidity-induced degradation via grain boundaries of HC(NH2)2PbI3 planar perovskite solar cells10.1002/adfm.201705363 ↗
35. Improvement and regeneration of perovskite solar cells via methylamine gas post-treatment10.1002/adfm.201703060 ↗
36. Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells, Mater
37. Phenylalkylamine passivation of organolead halide perovskites enabling high-efficiency and air-stable photovoltaic cells10.1002/adma.201603062 ↗
38. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
39. Methylamine-gas-induced defect-healing behavior of CH3NH3PbI3 thin films for perovskite solar cells10.1002/anie.201504379 ↗
40. New fullerene design enables efficient passivation of surface traps in high performance p-i-n heterojunction perovskite solar cells10.1016/j.nanoen.2016.04.057 ↗
41. Lewis acid−base adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
42. Enhanced photoluminescence and solar cell performance via Lewis base passivation of organic-inorganic lead halide perovskites10.1021/nn5036476 ↗
43. Adsorption of molecular additive onto lead halide perovskite surfaces: a computational study on Lewis base thiophene additive passivation10.1016/j.apsusc.2018.02.251 ↗
44. Enhanced long-term stability of perovskite solar cells by 3-hydroxypyridine dipping10.1039/C6CC09492A ↗
45. High-performance perovskite solar cells with large grain-Size obtained by using the Lewis acid-base adduct of thiourea10.1002/solr.201800034 ↗
46. Low-temperature, simple and efficient preparation of perovskite solar cells using Lewis bases urea and thiourea as additives: stimulating large grain growth and providing a PCE up to 18.8%10.1039/C8RA03175D ↗
47. Tuning the crystal growth of perovskite thin-films by adding the 2-pyridylthiourea additive for highly efficient and stable solar cells prepared in ambient air10.1039/C7TA00894E ↗
48. A bifunctional Lewis base additive for microscopic homogeneity in perovskite solar cells
49. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
50. Suppressing defects through the synergistic effect of a Lewis base and a Lewis acid for highly efficient and stable perovskite solar cells10.1039/C8EE02252F ↗
51. A review on “imidazoles”: their chemistry and pharmacological potentials
52. Auto-passivation of crystal defects in hybrid imidazolium/methylammonium lead iodide films by fumigation with methylamine affords high efficiency perovskite solar cells10.1016/j.nanoen.2019.01.027 ↗
53. Enhancing photovoltaic performance of inverted perovskite solar cells via imidazole and benzoimidazole doping of PC61BM electron transport layer
54. Enhanced efficiency of planar perovskite solar cells via a two-step deposition using DMF as an additive to optimize the crystal growth behavior10.1039/C7TA01517H ↗
55. Enhanced performance and stability of inverted planar perovskite solar cells by incorporating 1,6-diaminohexane dihydrochloride additive, Solar Energy Mater
56. Designing ternary blend bulk heterojunction solar cells with reduced carrier recombination and a fill factor of 77%10.1038/nenergy.2016.118 ↗
57. Effect of charge recombination on the fill factor of small molecule bulk heterojunction solar cells10.1002/aenm.201100040 ↗
58. Hysteresis-free and highly stable perovskite solar cells produced via a chlorine-mediated interdiffusion method10.1039/C5TA01668A ↗
59. Parameters affecting I−V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
60. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
61. Defect states in perovskite solar cells associated with hysteresis and performance10.1063/1.4963760 ↗
62. Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells10.1038/s41560-018-0219-8 ↗
63. Beyond bulk lifetimes: insights into lead halide perovskite films from time-resolved photoluminescence10.1103/PhysRevApplied.6.044017 ↗
64. Cation influence on carrier dynamics in perovskite solar cells10.1016/j.nanoen.2019.01.060 ↗
65. Passivated perovskite crystallization via g-C3N4 for high-performance solar cells10.1002/adfm.201705875 ↗
66. Chemical reduction of intrinsic defects in thicker heterojunction planar perovskite solar cells10.1002/adma.201606774 ↗
67. Electron-hole diffusion lengths >175 mm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
68. Consensus stability testing protocols for organic photovoltaic materials and devices, Solar Energy Mater