Analysis of edge losses on silicon heterojunction half solar cells
Source abstract
Abstract
Abstract Halved and shingled solar cells are a powerful technology to reduce cell-to-module losses and ultimately increase the output power of a photovoltaic module. The combination of this approach with high-efficiency silicon solar cells architectures, like heterojunction or passivated contacts solar cells, is a promising option, but comes also with new challenges. In particular, the low level of carrier recombination in these cells makes them highly sensitive to any additional defects, as it is the case for the unpassivated edge created when splitting in half a solar cell. In order to optimize the cutting processes, an accurate method to characterize edge losses, adapted to high-efficiency solar cells, is required. In this work, two approaches are proposed and compared. In the first one, edge losses are modelled with a parallel diode, and the associated recombination current (J02edge) is fitted with current-voltage measurements, as usually done in previous studies. The conditions of application of this method are widely discussed and precisely redefined for an accurate extraction of parameters in the case of high-efficiency solar cells. The second method proposed consists in simply calculating relative losses out of the main current-voltage parameters. We demonstrate that simple estimation of open-circuit voltage (Voc) losses is perfectly adapted to our characterization needs, provided that adapted measurement methodology is applied. Results obtained with both methods are then compared on heterojunction cells and discussed. If these two characterization techniques both provide accurate results for the laser scribing processes tested, the method based on open-circuit voltage loss comparison shows slightly less dispersion. Moreover, this last method does not rely on curve fitting, making it faster and insensitive to modeling issues. The Voc approach appears thus more adapted for a fine optimization of different cutting processes and eventual characterization step implemented in an industrial environment. However, the alternative J02edge method based on curve fitting remains of high interest, for example to compare cell losses obtained with usual values reported in the literature, provided that extraction of this parameter is done with the conditions assessed in this work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A mathematical model for cell-to-module conversion considering mismatching solar cells and the resistance of the interconnection ribbon10.1016/j.solener.2014.01.032 ↗
2. Unified methodology for determining CTM ratios: systematic prediction of module power10.1016/j.solmat.2014.06.025 ↗
3. Optimized interconnection of passivated emitter and rear cells by experimentally verified modeling10.1109/JPHOTOV.2016.2514706 ↗
4. High-efficiency modules with passivated emitter and rear solar Cells?An analysis of electrical and optical losses10.1109/JPHOTOV.2016.2614121 ↗
5. 335-W world-record p-type monocrystalline module with 20.6% efficient PERC solar cells10.1109/JPHOTOV.2015.2498039 ↗
6. Bifacial p-type silicon shingle solar cells − the “pSPEER” concept10.1002/solr.201700171 ↗
7. S. Guo, J. Singh, I. Peters, A. Aberle, and T. Walsh, « A quantitative analysis of photovoltaic modules using halved cells », Int. J. Photoenergy, vol. 2013, 2013.10.1155/2013/739374 ↗
8. Resistive power loss analysis of PV modules made from halved 15.6 × 15.6 cm2 silicon PERC solar cells with efficiencies up to 20.0%10.1109/JPHOTOV.2014.2367868 ↗
9. Loss analysis for laser separated solar cells10.1016/j.egypro.2014.08.094 ↗
10. Fell · 2017 · 853
11. Modeling edge recombination in silicon solar cells10.1109/JPHOTOV.2017.2787020 ↗
12. Modeling of edge losses in Al-BSF silicon solar cells10.1109/JPHOTOV.2016.2618603 ↗
13. Quantifying edge and peripheral recombination losses in industrial silicon solar cells10.1109/TED.2015.2480089 ↗
14. Impact of edge recombination in small-area solar cells with emitter windows10.1109/JPHOTOV.2015.2434597 ↗
15. Edge isolation of solar cells using laser doping10.1016/j.solmat.2014.10.002 ↗
16. Modeling, geometric optimization and isolation of the edge region in silicon solar cells10.1016/j.solmat.2009.12.033 ↗
17. Silicon heterojunction rear emitter solar cells: less restrictions on the optoelectrical properties of front side TCOs10.1016/j.solmat.2013.11.029 ↗
18. Recent Progress on the CEA-INES heterojunction solar cell pilot line
19. Analytical methods for the extraction of solar-cell single- and double-diode model parameters from I-V characteristics10.1109/T-ED.1987.22920 ↗
20. Identification of unknown parameters of solar cell models: a comprehensive overview of available approaches10.1016/j.rser.2018.03.011 ↗
21. Parameter estimation of solar photovoltaic (PV) cells: a review10.1016/j.rser.2016.03.049 ↗
22. Fast and reliable calculation of the two-diode model without simplifications10.1002/pip.2301 ↗
23. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
24. The role of inhomogeneities for understanding current–voltage characteristics of solar cells10.1109/JPHOTOV.2018.2861728 ↗
25. McIntosh · 2001
26. Influence of defects on solar cell characteristics10.4028/www.scientific.net/SSP.156-158.1 ↗
27. Nondestructive local analysis of current–voltage characteristics of solar cells by lock-in thermography10.1016/j.solmat.2011.05.049 ↗
28. Limits on the open-circuit voltage and efficiency of silicon solar cells imposed by intrinsic Auger processes10.1109/T-ED.1984.21588 ↗
29. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗