journal article·2015-09Open access

Influence of Ge composition in the Cu2Sn1−Ge S3 thin-film photovoltaic absorber prepared by sulfurization of laminated metallic precursor

Myo Than Htay, Takahiro Mandokoro, Hiroaki Seki, Takanori Sakaizawa, Noritaka Momose, Toshinori Taishi, Yoshio Hashimoto, Kentaro Ito

Publisher page

Abstract

Abstract Cu 2 Sn 1− x Ge x S 3 thin-film absorbers are prepared by sulfurization of laminated precursors. The crystal grain size is enhanced under higher growth temperature and/or sulfur pressure. By the XRD and Raman analyses, the crystal alloy is considered to be composed of majority monoclinic phase with minority secondary phase such as Cu 2 (Sn 1− x Ge x ) 3 S 7 throughout the whole Ge/(Ge+Sn) composition range. The optical band gap is observed to be varied between 0.94 eV and 1.30 eV in relation with the Ge contents. A photovoltaic conversion efficiency of about 2% is obtained in the sample utilizing Cu 2 Sn 0.6 Ge 0.4 S 3 absorber.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Researches sur les effects de la radiation chimique de la lumiére solaire au moyen des courants électriques
2. Mémoire sur les effets électriques produits sous ĺinfluence des rayons solaires
3. Ueber den einfluss des lichtes auf electrostatisch geladene Körper10.1002/andp.18882690206 ↗
4. Ueber einen einfluss des ultravioletten lichtes auf die electrische entladung10.1002/andp.18872670827 ↗
5. The photovoltaic effect10.1021/cr60098a004 ↗
6. Novel 19.8% efficient honeycomb textured multicrystalline and 24.4% monocrystalline silicon solar cells10.1063/1.122345 ↗
7. 24.5% efficiency silicon PERT cells on MCZ substrates and 24.7% efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
8. B.M. Kayes, H. Nie, R. Twist, S.G. Spruytte, F. Reinhardt, I.C. Kizilyalli, G.S. Higashi, 27.6% Conversion efficiency, a new record for single-junction solar cells under 1 sun illumination, in: Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, 978-1-4244-9965-6/11 http://dx.doi.org/10.1109/PVSC.2011.618583110.1109/PVSC.2011.6185831 ↗
9. New world record efficiency for Cu(In,Ga)Se thin-film solar cells beyond 20%10.1002/pip.1078 ↗
10. Solar cell efficiency tables (version 44)10.1002/pip.2525 ↗
11. W. Wang, M.T. Winkler, O. Gunawan, T. Gokmen, T.K. Todorov, Y. Zhu, D.B. Mitzi, Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency, Adv. Energy Mater. 4 (2014) 1301465. http://dx.doi.org/10.1002/aenm.201301465.10.1002/aenm.201301465 ↗
12. T. Mandokoro, M.T. Htay, N. Momose, T. Taishi, Y. Hashimoto, K. Ito, Preparation of Cu2Sn1−xGexS3 thin-film alloys by sulfurization and their photovoltaic properties, in: The Fourth International Symposium on Organic and Inorganic Electronic Materials and Related Nanotechnologies, 2013, P3-57.
13. Fabrication of Cu2SnS3 thin films by sulfurization of evaporated Cu-Sn precursors for solar cells10.1002/pssc.201200866 ↗
14. Non-toxic, earth-abundant 2% efficient Cu2SnS3 solar cell based on tetragonal films direct-coated from single metal-organic precursor solution10.1016/j.solmat.2013.02.017 ↗
15. Cu2SnS3 thin films by sulfurization of Cu/Sn stacked precursors10.7567/JJAP.51.10NC35 ↗
16. Cu2SnS3 thin-film solar cells from electroplated precursors10.7567/JJAP.51.10NC34 ↗
17. Study and enhance the photovoltaic properties of narrow-bandgap Cu2SnS3 solar cell by p–n junction interface modification10.1016/j.jcis.2012.03.015 ↗
18. Thin film solar cells based on the ternary compound Cu2SnS310.1016/j.tsf.2012.05.085 ↗
19. Phase relations and optical properties of semiconducting ternary sulfides in the system Cu–Sn–S10.1016/S0022-3697(03)00172-0 ↗
20. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
21. Control of doping in Cu2SnS3 through defects and alloying10.1021/cm501339v ↗
22. Fabrication of ternary Cu–Sn–S sulfides by a modified successive ionic layer adsorption and reaction (SILAR) method10.1039/c2jm31669b ↗
23. Study of ternary Cu2SnS3 and Cu3SnS4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
24. Imaging and phase identification of Cu2ZnSnS4 thin films using confocal Raman spectroscopy10.1116/1.3625249 ↗
25. CuxSnSx+1 (x=2,3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering10.1002/pssc.200982746 ↗
26. Crystal structure and twinning of monoclinic Cu2SnS310.1016/S0025-5408(00)00347-0 ↗
27. Synthesis, electrical conductivity, and crystal structure of Cu4Sn7S16 and structure refinement of Cu2SnS310.1006/jssc.1998.7822 ↗
28. Etude des proprietes electriques des phases10.1016/0025-5408(74)90102-0 ↗
29. Synthesis and single-crystal structural study of Cu2GeS310.1016/S0025-5408(97)00115-3 ↗
30. Infrared optical properties and crystal structure of Cu2GeS310.1002/crat.2170240219 ↗
31. Infrared lattice vibrations and crystal structure of Cu2GeS310.1007/BF00721522 ↗
32. Fabrication of Cu2GeS3-based thin film solar cells by sulfurization of Cu/Ge stacked precursors10.7567/JJAP.53.05FW10 ↗
33. Cu2Sn1−xGexS3 (x=0.17) thin-film solar cells with high conversion efficiency of 6.0%10.7567/APEX.6.045501 ↗
34. Energy level diagram around Ge-rich grain boundaries in Cu2Sn1−xGexS3 (CTGS) thin-film solar cells10.1016/j.solmat.2014.11.024 ↗
35. Cu2ZnSnS4 thin film solar cells utilizing sulfurization of metallic precursor prepared by simultaneous sputtering of metal targets10.7567/JJAP.50.01BG09 ↗
36. A cadmium-free Cu2ZnSnS4/ZnO heterojunction solar cell prepared by practicable processes10.7567/JJAP.50.032301 ↗
37. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗