Effect of excessive Pb content in the precursor solutions on the properties of the lead acetate derived CH3NH3PbI3 perovskite solar cells
Source abstract
Abstract
Abstract Organic–inorganic CH3NH3PbI3 (MAPbI3) inverted structured perovskite films were prepared using Pb(CH3COO)2 (Pb(OAc)2) and CH3NH3I (MAI) as source materials. The structural, optical and photoelectronic properties of the MAPbI3 films varied with the Pb(OAc)2/MAI molar ratio. It was found that the Pb(OAc)2/MAI molar ratio greatly influenced the structure and morphology of the MAPbI3 films. A suitable amount of excessive Pb(OAc)2 (about 5 mol% excessive Pb) in the solution made the film smoother with improved film crystallinity. This resulted in enhanced power conversion efficiency (PCE). However, for films derived from solution with low Pb(OAc)2/MAI or high Pb(OAc)2/MAI ratio, defects such as pits or pinholes were easily formed with low crystallinity, and hence decreased the lifetime of the carriers and photoelectrical properties of the final solar cells. Using a solution with 5% excessive Pb, inverted structured CH3NH3PbI3 perovskite solar cells with PCE of nearly 14% were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
3. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
4. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
5. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
6. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
7. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
8. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
9. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
10. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
11. Formation of thin films of organic-inorganic perovskites for high-efficiency solar cells10.1002/anie.201410214 ↗
12. Ultrasmooth organic–inorganic perovskite thin-film formation and crystallization for efficient planar heterojunction solar cells10.1038/ncomms7142 ↗
13. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
14. Effect of annealing temperature on film morphology of organic–inorganic hybrid perovskite solid-state solar cells10.1002/adfm.201304022 ↗
15. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
16. High efficiency methylammonium lead triiodide perovskite solar cells: the relevance of non-stoichiometric precursors10.1039/C5EE02555A ↗
17. The adverse effects of excessively remained PbI2 on photovoltaic performance, charge separation and trap state properties in mesoporous structured perovskite solar cells10.1002/chem.201605668 ↗
18. Is excess PbI2 beneficial for perovskite solar cell performance?10.1002/aenm.201502206 ↗
19. Enhancing the planar heterojunction perovskite solar cell performance through tuning the precursor ratio10.1039/C6TA00679E ↗
20. Native defect-induced hysteresis behavior in organolead iodide perovskite solar cells10.1002/adfm.201504997 ↗
21. Beneficial effects of PbI2 incorporated in organo-lead halide perovskite solar cells10.1002/aenm.201502104 ↗
22. High-performance inverted planar heterojunction perovskite solar cells based on lead acetate precursor with efficiency exceeding 18%10.1002/adfm.201601175 ↗
23. Solution-processed planar lead iodide photovoltaic device
24. Tuning the light emission properties by band gap engineering in hybrid lead halide perovskite10.1021/ja511198f ↗