High-temperature shaping perovskite film crystallization for solar cell fast preparation
Source abstract
Abstract
Abstract Recent developments of PSCs have achieved great progress with power conversion efficiency reached to 22.1%. The crystal growth process as an important factor will significantly influence the quality of perovskite films and the device performance. In this paper, we demonstrate a simple approach for fast preparation based on the precursor compositions of (FAPbI3) 0.85 (MAPbBr3)0.15 by regulating the temperature during annealing process for transition from FAI, PbI2, MABr, and PbBr2 to perovskite. The film will be shaped in 15 s for one-step deposition at annealing temperature of 220 °C. It has been found that higher temperature will induce perovskite to form larger size and oriented crystal grains rapidly. This will contribute to longer carrier lifetime and smaller carrier recombination which, are beneficial for solar cell device. The champion cell with PCE of 17.1% had been obtained measured under conditions of AM 1.5 G, 100 mW/cm2. Furthermore, this method exhibits good stability which is benefited from large size crystal, the device will not be deteriorated and the PCE maintained over 90% after 3 months.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
2. An easy-to-fabricate low-temperature TiO2 electron collection layer for high efficiency planar heterojunction perovskite solar cells10.1063/1.4890245 ↗
3. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
4. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
5. Compact layer free perovskite solar cells with 13.5% efficiency10.1021/ja508758k ↗
6. Mesoporous BaSnO3 layer based perovskite solar cells10.1039/C5CC08156D ↗
7. Controlled crystallization of CH 3 NH 3 PbI 3 films for perovskite solar cells by various PbI2 (X) complexes10.1016/j.solmat.2016.06.037 ↗
8. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
9. o-Methoxy substituents in spiroOMeTAD for efficient inorganic–organic hybrid perovskite solar cells10.1021/ja502824c ↗
10. Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 17%10.1021/jacs.5b06444 ↗
11. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
12. Effect of heat treatment on the electrical properties of perovskite solar cells10.1016/j.solmat.2016.04.055 ↗
13. Improving performance and reducing hysteresis in perovskite solar cells by using F8BT as electron transporting layer10.1016/j.solmat.2016.05.026 ↗
14. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
15. Hydrochloric acid accelerated formation of planar CH3NH3PbI3 perovskite with high humidity tolerance10.1039/C5TA06172E ↗
16. Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells10.1016/j.nanoen.2014.08.015 ↗
17. Fast and controllable crystallization of perovskite films by microwave irradiation process10.1021/acsami.6b01558 ↗
18. Laser-assisted crystallization of CH3NH3PbI3 films for efficient perovskite solar cells with a high open-circuit voltage10.1039/C6CC00753H ↗
19. Modulating crystal grain size and optoelectronic properties of perovskite films for solar cells by reaction temperature10.1039/C5NR08935B ↗
20. Effect of structural phase transition on charge-carrier lifetimes and defects in CH3NH3SnI3 perovskite10.1021/acs.jpclett.6b00322 ↗
21. Identification and characterization of the intermediate phase in hybrid organic–inorganic MAPbI 3 perovskite10.1039/C5DT04420K ↗
22. Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys10.1021/acs.chemmater.5b04107 ↗
23. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
24. Fast and controllable crystallization of perovskite films by microwave irradiation process10.1021/acsami.6b01558 ↗
25. Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application10.1364/OE.21.011448 ↗
26. Temperature-induced irreversible phase transition from perovskite to diamond but pressure-driven back-transition in an ammonium copper formate10.1002/anie.201510024 ↗
27. Crystallinity and defect state engineering in organo-lead halide perovskite for high-efficiency solar cells10.1039/C5TA09249C ↗
28. Perovskite solar cells with near 100% internal quantum efficiency based on large single crystalline grains and vertical bulk heterojunctions10.1021/jacs.5b03144 ↗
29. Vapor and healing treatment for CH3NH3PbI3−xClx films toward large-area perovskite solar cells10.1039/C5NR08658B ↗
30. Achieving long-term stable perovskite solar cells via ion neutralization10.1039/C6EE00612D ↗
31. Onset of heterogeneous crystal nucleation in colloidal suspensions10.1038/nature02397 ↗
32. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
33. Abnormal crystal growth in CH 3 NH 3 PbI 3− x Cl x using a multi-cycle solution coating process10.1039/C5EE01179E ↗
34. Charge transfer and recombination at the metal oxide/CH 3 NH 3 PbClI 2/spiro-OMeTAD interfaces: uncovering the detailed mechanism behind high efficiency solar cells10.1039/C4CP03073G ↗
35. Unravelling the mechanism of photoinduced charge transfer processes in lead iodide perovskite solar cells10.1038/nphoton.2013.374 ↗
36. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗