journal article·2014-07

Role of ZnO nanostructured layer spray deposited under an electric field in stability of inverted organic solar cells

Neha Chaturvedi, Sanjay Kumar Swami, Anuj Kumar, Viresh Dutta

Publisher page

Abstract

Abstract Spray process under an electric field was used for the deposition of zinc oxide (ZnO) electron transport layer by applying a DC voltage to the nozzle in order to make the layer smoother, highly crystalline and defect free having good electrical and optical properties. The nanostructure formed differed from that in the spray deposited ZnO layer without applying any voltage. The photovoltaic performance of the inverted organic solar cells (IOSC – ITO/ZnO/P3HT:PCBM/Ag) made using the nanostructured layer (deposited with the applied voltage=1000 V) and the cell stability were found to improve in comparison with the devices made using the nanostructured layer with the applied voltage=0 V. A change in the surface morphology of ZnO layer occurred with time and its effect on the cell performance was investigated. Photoluminescence (PL) spectra as well as XPS spectra showed that defects related mainly to oxygen vacancies were reduced in the spray deposited ZnO layer with the applied voltage=1000 V. This resulted in a higher IOSC efficiency (~2.7%) and good stability for a long duration (~105 days) with only 20% degradation in PCE. On the other hand, there was a 46% degradation in PCE of IOSC using spray deposited ZnO layer without applying voltage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Spontaneous formation of nanoripples on the surface of ZnO thin films as hole-blocking layer of inverted organic solar cells
2. Plastic solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
3. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
4. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
5. Solution-processed zinc oxide nanoparticles as interlayer materials for inverted organic solar cells10.1016/j.solmat.2012.09.007 ↗
6. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
7. P-type indium oxide thin film for the hole-transporting layer of organic solar cells10.1016/j.tsf.2011.12.044 ↗
8. High performance inverted bulk heterojunction solar cells by incorporation of dense, thin ZnO layers made using atmospheric atomic layer deposition10.1016/j.solmat.2013.04.020 ↗
9. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO under layer10.1063/1.2359579 ↗
10. Device stability of inverted and conventional bulk heterojunction solar cells with MoO3 and ZnO nanoparticles as charge transport layers10.1016/j.orgel.2013.07.016 ↗
11. Development of air stable polymer solar cells using an inverted gold on top anode structure10.1016/j.tsf.2004.10.018 ↗
12. Enhancement of photovoltaic characteristics using a PEDOT interlayer in TiO2/MEHPPV heterojunction devices
13. Effect of atmospheres on the open-circuit photovoltage of nanoporous TiO2/poly(3-hexylthiophene) heterojunction solar cell10.1016/j.tsf.2004.12.056 ↗
14. Improved performance and stability of inverted organic solar cells with sol–gel processed, amorphous mixed metal oxide electron extraction layers comprising alkaline earth metals10.1002/aenm.201300308 ↗
15. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
16. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
17. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
18. Reduction of collection efficiency of charge carriers with increasing cell size in polymer bulk heterojunction solar cells10.1002/adfm.201001578 ↗
19. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
20. Organic photovoltaics with high stability sustained for 100 days without encapsulation fabricated using atomic layer deposition10.1002/pssr.201206070 ↗
21. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
22. Highly efficient uniform ZnO nanostructures for an electron transport layer of inverted organic solar cells10.1039/c3cc43053g ↗
23. Interfacial molecularorder of conjugated polymer in P3HT:ZnO bilayer photovoltaics and its impact on device performance10.1063/1.4824847 ↗
24. Spray-coated organic solar cells with large-area of 12.25cm210.1016/j.solmat.2010.10.033 ↗
25. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
26. Photovoltaic devices: high-performance organic solar cells with spray coated hole-transport and active layers10.1002/adfm.201001562 ↗
27. Spray-coated ZnO electron transport layer for air-stable inverted organic solar cells10.1016/j.solmat.2011.09.045 ↗
28. Nanostructured organic and hybrid solar cells10.1002/adma.201003991 ↗
29. Ultrathin TiO2 films on ZnO electron-collecting layers of inverted organic solar cell10.1021/jp2063589 ↗
30. Optimization of ZnO nanorod array morphology for hybrid photovoltaic devices10.1021/jp904387z ↗
31. Effect of electric field on the spray deposited poly (3,4-ethylenedioxythiophene): poly(styrenesulfonate) layer and its use in organic solar cell10.1063/1.4831662 ↗
32. Preparation and characterization of ZnO thin films deposited by sol–gel spin coating method
33. Optical and structural properties of ZnO thin films fabricated by sol–gel method
34. Efficiency enhancement of inverted organic photovoltaic devices with ZnO nanopillars fabricated on FTO glass substrates10.1016/j.synthmet.2011.08.025 ↗
35. Morphological control of ZnO nanostructures by electro deposition10.1021/jp051007b ↗
36. Enhanced inverted organic solar cell performance by post-treatments of solution-processed ZnO buffer layers10.1039/c3ra46702c ↗
37. Growth and characterization of Zn–ZnO core–shell polygon prismatic nano crystals on Si10.1016/j.jcrysgro.2004.05.064 ↗
38. Enhanced photoluminescence, raman spectra and field-emission behavior of indium-doped ZnO nanostructures10.1039/C3TC00082F ↗
39. S.L. Wang, H.W. Zhu, W.H. Tang, P.G. Li, Propeller-shaped ZnO nanostructures obtained by chemical vapor deposition: photoluminescence and photo catalytic properties, J. Nano. Mater. 2012 (2011) 1-5.
40. High temperature excitonic stimulated emission from ZnO epitaxial layers10.1063/1.122077 ↗
41. Effects of substrate temperature on the properties of Ga doped ZnO by pulsed laser deposition10.1016/j.tsf.2006.01.051 ↗
42. X ray photoemission spectroscopy studies of Sn doped indium oxide films10.1063/1.324149 ↗
43. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗