journal article·2017-07

Enhanced performance of mesostructured perovskite solar cells in ambient conditions with a composite TiO2–In2O3 electron transport layer

Andigoni Apostolopoulou, Dimitra Sygkridou, Andreas Rapsomanikis, Alexandros N. Kalarakis, Elias Stathatos

Publisher page

Abstract

Abstract Perovskite solar cells (PSCs) with a composite mesoporous TiO2–In2O3 electron transport layer were constructed and tested. For the formation of the In2O3 overlayer three different molar concentrations of the precursor indium(III) acetylacetonate were investigated (TiO2–In2O3 (1) 46 mM, TiO2–In2O3 (2) 50 mM and TiO2–In2O3 (3) 56 mM). In2O3 was chosen because of its slightly higher conduction band placement compared with TiO2 which could facilitate the charge transport of the photogenerated electrons from the conduction band edge of the perovskite to the TiO2, reducing the recombination rate. The electron transport films were characterized structurally and morphologically, while the electrical properties of the PSCs with the TiO2–In2O3 bilayer were examined in detail and compared against cells with pristine TiO2. All layers were deposited by the spin coating method and at ambient conditions of temperature and humidity. The structure that was used for the mesostructured PSCs was FTO/c-TiO2/mp-TiO2/(In2O3)/CH3NH3I3−xClx/P3HT/Au. The optimum device performance was observed for PSCs with the TiO2–In2O3 (2) electron layer, having an improved short–circuit current density and open–circuit voltage, with an overall power conversion efficiency of almost 12.9%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
2. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
3. Electron-hole diffusion lengths exceeding 1 μm in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
4. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
5. CH3NH3Cl-assisted one-step solution growth of CH3NH3PbI3: structure, charge-carrier dynamics, and photovoltaic properties of perovskite solar cells10.1021/jp502696w ↗
6. Improved morphology control using a modified two-step method for efficient perovskite solar cells10.1021/am504320h ↗
7. Pathways toward high-performance perovskite solar cells: review of recent advances in organo-metal halide perovskites for photovoltaic applications10.1117/1.JPE.6.022001 ↗
8. A universal deposition protocol for planar heterojunction solar cells with high efficiency based on hybrid lead halide perovskite families10.1002/adma.201603747 ↗
9. Hole, transporting materials in inverted planar perovskite solar cells
10. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
11. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
12. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
13. Enhanced stability of perovskite solar cells with low-temperature hydrothermally grown SnO2 electron transport layers10.1002/adfm.201600910 ↗
14. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
15. Facet-dependent photocatalytic properties of TiO2-based composites for energy conversion and environmental remediation10.1002/cssc.201300924 ↗
16. Dye-sensitized solar cells10.1021/cr900356p ↗
17. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
18. Zinc oxide nanostructures: growth, properties and applications
19. Electrochemical design of nanostructured ZnO charge carrier layers for efficient solid-state perovskite-sensitized solar cells10.1002/aenm.201400932 ↗
20. Origin of the thermal instability in CH3NH3PbI3 thin films deposited on ZnO10.1021/acs.chemmater.5b01598 ↗
21. Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells10.1039/c3cc46534a ↗
22. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
23. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
24. Lead-free solid-state organic-inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
25. From unstable CsSnI3 to air-stable Cs2SnI6: a lead-free perovskite solar cell light absorber with bandgap of 1.48 eV and high absorption coefficient10.1016/j.solmat.2016.09.022 ↗
26. Facile synthesis and characterization of sulfur doped low band gap bismuth based perovskites by soluble precursor route10.1021/acs.chemmater.6b02315 ↗
27. MAPbI3-xClx mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
28. Chloride inclusion and hole transport material doping to improve methyl ammonium lead bromide perovskite-based high open-circuit voltage solar cells10.1021/jz402706q ↗
29. National Renewable Energy Laboratory (NREL) Best Research-cell Efficiency Chart, 〈http://www.nrel.gov/pv/assets/images/efficiency_chart.jpg〉, 2016.
30. Enhanced performance in hole transport free perovskite solar cells via morphology control of PbI2 film by solvent treatment10.1016/j.jpowsour.2016.04.062 ↗
31. Low-cost and efficient hole-transport-material-free perovskite solar cells employing controllable electron-transport layer based on P25 nanoparticles10.1016/j.electacta.2016.07.095 ↗
32. A review of organic small molecule-based hole-transporting materials for meso-structured organic-inorganic perovskite solar cells10.1039/C6TA06987H ↗
33. Role of 4-tert-butylpyridine as a hole transport layer morphological controller in perovskite solar cells10.1021/acs.nanolett.6b02158 ↗
34. Perovskite solar cell with low cost Cu-phthalocyanine as hole transporting material10.1039/C4RA14321C ↗
35. An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide10.1021/ja411014k ↗
36. Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency10.1038/ncomms4834 ↗
37. Inorganic hole conducting layers for perovskite-based solar cells10.1021/jz500645n ↗
38. Performance enhancement of perovskite-sensitized mesoscopic solar cells using Nb-doped TiO2 compact layer10.1007/s12274-015-0711-4 ↗
39. Yttrium-substituted nanocrystalline TiO2 photoanodes for perovskite based heterojunction solar cells10.1039/C3NR05884K ↗
40. Efficient indium-doped TiOx electron transport layers for high-performance perovskite solar cells and perovskite-silicon tandems
41. Al2O3-coated SnO2/TiO2 composite electrode for the dye-sensitized solar cells10.1016/j.electacta.2004.11.003 ↗
42. TiO2 conduction band modulation with In2O3 recombination barrier layers in solid-state dye-sensitized solar cells10.1021/jp406789k ↗
43. Mesoporous BaTiO3/TiO2 double layer for electron transport in perovskite solar cells10.1021/acs.jpcc.6b04642 ↗
44. SrTiO3/TiO2 composite electron transport layer for perovskite solar cells10.1016/j.matlet.2016.10.090 ↗
45. High performance perovskite solar cells with functional highly porous TiO2 thin films constructed in ambient air10.1016/j.solmat.2016.03.001 ↗
46. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report)10.1515/pac-2014-1117 ↗
47. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
48. Pore size dependent hysteresis elimination in perovskite solar cells based on highly porous TiO2 films with widely tunable pores of 15-34 nm10.1021/acs.chemmater.6b03445 ↗
49. The effect of Al2O3 barrier layers in TiO2/dye/CuSCN photovoltaic cells explored by recombination and DOS characterization using transient photovoltage measurements10.1021/jp0468049 ↗
50. 50 nm-sized spherical TiO2 nanocrystals for highly efficient mesoscopic perovskite solar cells10.1039/C5NR01364J ↗