Non-destructive 2D-luminescence detection of EVA in aged PV modules: Correlation to calorimetric properties, additive distribution and a clue to aging parameters
Source abstract
Abstract
Abstract Knowledge about the aging behavior of the polymeric encapsulation material in photovoltaic (PV) modules is a very important factor for lifetime prediction. The inability to apply conventional characterization methods without destruction of the module creates the need for new, sensitive and non-invasive characterization methods. Luminescence has recently been introduced as a non-destructive method to follow the degradation of the most common encapsulation material, ethylene-vinyl acetate copolymer (EVA). In aged PV modules inhomogeneous luminescence patterns were found, which are specific for different aging factors such as accelerated thermal aging, UV aging or outdoor weathering. Spatially resolved dynamic scanning calorimetry (DSC) measurements of the encapsulating EVA of two sets of differently aged PV mini modules reveals a correlation of the recrystallization peak temperature and the luminescence patterns. The spatial distribution of additives in the EVA and the onset temperature of oxidation were found to show no convincing correlation to the luminescence patterns. The results substantiate that a spatial inhomogeneity of crosslinking properties is a manifestation of aging effects, which is attributed to diffusion limited oxidation (DLO) conditions in the EVA between cell and front glass. The characterization of the EVA luminescence behavior taken over the module surface appears as a valuable tool to assess DLO effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Correlation of spatially resolved photoluminescence and viscoelastic mechanical properties of encapsulating EVA in differently aged PV modules10.1002/pip.2734 ↗
2. Degradation of the encapsulant polymer in outdoor weathered photovoltaic modules: spatially resolved inspection of EVA ageing by fluorescence and correlation to electroluminescence10.1016/j.solmat.2012.03.022 ↗
3. Fluorescence imaging a powerful tool for the investigation of polymer degradation in PV modules
4. Observation of polymer degradation processes in photovoltaic modules via luminescence detection
5. Determination of the cross-linking degree of commercial ethylene-vinyl-acetate polymer by luminescence spectroscopy10.1007/s10965-014-0457-9 ↗
6. M. Köhl, S. Hoffmann, B. Röder, J.C. Schlothauer, Linking accelerated ageing tests and outdoor testing of PV-modules by non-destructive luminescence spectroscopy of the polymeric encapsulant, in: Proceedings of the 2nd Atlas/NIST Workshop on Photovoltaic Materials Durability, Gaithersburg, MD, 2013.
7. B. Röder, J.C. Schlothauer, S. Jungwirth, M. Köhl, The investigation of polymer degradation by luminescence detection caused by different ageing factors, in: Proceedings of the 5th European Weathering Symposium: Natural and artificial ageing of polymers, Lisbon, Portugal, GUS, Pfinztal, 2011, pp. 337–346.
8. B. Röder, J.C. Schlothauer, M. Köhl, Luminescence Spectroscopy as powerful Tool for non-Destructive inspection of PV Module encapsulants, in: Proceedings of the 5th SOPHIA Workshop PV-Module Reliability, Loughborough, UK, 2015.
9. Review of polymer oxidation and its relationship with materials performance and lifetime prediction10.1016/j.polymdegradstab.2013.06.024 ↗
10. G.M. Wallner, K. Grabmayer, G. Oreski, Physical Characterization of EVA Embedding Materials for Solar Cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010, pp. 4033–4035.
11. J.-T. Liu, T. Kang, P. Ye, Curing Determination of EVA for Solar Panel Application by DSC, 2015 (available at) 〈http://www.perkinelmer.com/pdfs/downloads/app_evacuringforsolarpanelsbydsc.pdf〉 (accessed on 01.02.15).
12. A new DSC method for the quality control of PV modules: simple and quick determination of the degree of crosslinking of EVA encapsulants
13. Determining the degree of crosslinking of ethylene vinyl acetate photovoltaic module encapsulants—A comparative study10.1016/j.solmat.2013.04.022 ↗
14. Investigation of the curing reaction of EVA by DSC and DMA
15. Determination of thermal properties of crosslinked EVA encapsulant material in outdoor exposure by TSC and DSC methods10.1016/j.renene.2013.10.013 ↗
16. G. Oreski, G.M. Wallner, Damp heat induced physical aging of PV encapsulation materials, in: Proceedings of the 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, USA, 2010, pp. 1–6.10.1109/ITHERM.2010.5501297 ↗
17. Effect of hot air aging on the properties of ethylene-vinyl acetate copolymer and ethylene-acrylic acid copolymer blends10.1002/app.29506 ↗
18. Effect of damp-heat aging on the structures and properties of ethylene-vinyl acetate copolymers with different vinyl acetate contents10.1002/app.29659 ↗
19. UV aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents10.1016/j.polymdegradstab.2010.02.020 ↗
20. Diffusion controlled radiochemical oxidation of low density polyethylene—I
21. Effect of radiochemical ageing on the tensile properties of high density polyethylene10.1016/0014-3057(89)90072-4 ↗
22. F.J. Pern, S.H. Glick, Fluorescence analysis as a diagnostic tool for polymer encapsulation processing and degradation, in: Proceedings of the 12th NREL Photovoltaic Program Review, Denver, Colorado, USA, 1993, pp. 573–58510.1063/1.45730 ↗
23. Characterization of ethylene vinyl acetate (EVA) encapsulant: Effects of thermal processing and weathering degradation on its discoloration10.1016/0927-0248(92)90013-F ↗
24. Luminescence and absorption characterization of ethylene-vinyl acetate encapsulant for PV modules before and after weathering degradation10.1016/0141-3910(93)90035-H ↗
25. Luminescence of degraded poly(vinylchloride)
26. E.D. Owen (Ed.), Degradation and Stabilisation of PVC, Springer, S.l., 1984.10.1007/978-94-009-5618-6 ↗
27. The configuration, conformation and degradation of polyvinyl chloride10.1351/pac197126020193 ↗
28. Assignment of UV-absorption maxima of degraded PVC10.1007/BF00254913 ↗
29. Investigation of the degradation and stabilization of EVA-based encapsulant in field-aged solar energy modules10.1016/S0141-3910(96)00162-0 ↗
30. Encapsulation of PV modules using ethylene vinyl acetate copolymer as the encapsulant10.1002/mren.201400065 ↗
31. Photo-oxidative degradation of poly(ethylene-co-vinyl acetate)/nisin antimicrobial films10.1016/j.polymdegradstab.2012.01.003 ↗
32. Polymer/carbon nanotube nanocomposites: influence of carbon nanotubes on EVA photodegradation10.1016/j.polymdegradstab.2007.06.021 ↗
33. Degradation and stabilisation of poly(ethylene-stat-vinyl acetate): 1–spectroscopic and rheological examination of thermal and thermo-oxidative degradation mechanisms10.1016/j.polymdegradstab.2005.04.034 ↗
34. W.H. Holley, S.C. Agro, J.P. Galica, L.A. Thoma, R.S. Yorgensen, M. Ezrin, P. Klemchuk, G. Lavigne, Investigation into the causes of browning in EVA encapsulated flat plate PV modules, in: Proceedings of the IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC), Waikoloa, HI, USA, 1994, pp. 893–896.10.1109/WCPEC.1994.520105 ↗
35. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
36. Photovoltaic module performance and durability following long-term field exposure10.1002/(SICI)1099-159X(200003/04)8:2<241::AID-PIP290>3.0.CO;2-D ↗
37. F.J. Pern, S.H. Glick, Thermal processing of EVA encapsulants and effects of formulation additives [for solar cells], in: Proceedings of the Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference, Washington, DC, USA, 1996, pp. 1251–1254.10.1109/PVSC.1996.564359 ↗
38. F.J. Pern, Modification of EVA Formulation for Improved Stability, in: Proceedings of the Photovoltaic Performance and Reliability Workshop, Golden, Colorado, 1993, pp. 358–374.
39. Aspects of the impact of stabilizer mass on performance in polymers10.1016/S0141-3910(00)00045-8 ↗
40. Influence of various stabilizer systems on the ageing behavior of PE–MD—I. Hot-water ageing of compression molded plaques10.1016/S0141-3910(98)00048-2 ↗
41. Oxidation induction time and oxidation onset temperature of polyethylene in air10.1007/s10973-009-0097-1 ↗
42. Use of oxidation onset temperature measurements for evaluating the oxidative degradation of isotatic polypropylene10.1023/B:JOOE.0000003123.68569.0e ↗
43. Temperature dependence of the inhibited oxidation parameters of polyethylene10.1016/0141-3910(87)90086-3 ↗
44. H. Zweifel (Ed.), Plastics Additives Handbook, 6th ed., Hanser, Munich, Cincinnati, Ohio, 2009.
45. Stabiliser diffusion in long-term pressure tested polypropylene pipes analysed by IR microscopy10.1016/j.polymdegradstab.2009.03.020 ↗
46. Molecular structure, morphology, and antioxidant consumption in medium density polyethylene pipes in hot-water applications10.1002/pen.760321003 ↗
47. Assessment of lifetime of hot-water polyethylene pipes based on oxidation induction time data10.1002/pen.10293 ↗
48. Determination of stabilisers in polymeric materials used as encapsulants in photovoltaic modules10.1016/j.polymertesting.2013.12.004 ↗
49. Crystalline modifications of ethylene-vinyl acetate copolymers induced by a tensile drawing: effect of the molecular weight10.1016/S0032-3861(97)10328-7 ↗
50. Thermal stability of slow and fast cure EVA encapsulant material for photovoltaic module manufacturing process10.1016/j.solmat.2006.03.023 ↗
51. Relationship between microstructure phase and relaxation transitions in ethylene-(vinyl acetate) copolymers prepared by emulsion copolymerization10.1016/S0032-3861(97)00558-2 ↗
52. Effect of vinylacetate content on crystallinity and second-order transitions in ethylene?vinylacetate copolymers10.1002/(SICI)1097-4628(19970606)64:10<1903::AID-APP4>3.0.CO;2-M ↗
53. K. Grabmayer, Physikalische Charakterisierung des Vernetzungsgrades von EVA Einbettmaterialien für Solarzellen (Masters Thesis), Leoben, 2010.
54. Investigation of ethylene/vinyl acetate copolymer (EVA) by thermal analysis DSC and DMA10.1016/j.polymertesting.2010.12.003 ↗
55. Effects of crystallinity and crosslinking on the thermal and rheological properties of ethylene vinyl acetate copolymer10.1016/j.polymer.2005.09.080 ↗
56. Morphology and properties of polypropylene/ethylene vinyl acetate copolymer/wood powder blend composites10.3144/expresspolymlett.2009.24 ↗
57. Polymer ageing: physics, chemistry or engineering? Time to reflect10.1016/j.crci.2006.07.008 ↗
58. Annealing effects of polymers and their underlying molecular mechanisms10.1016/0032-3861(76)90187-7 ↗
59. T. Shiono, K. Nomura, M. Terano, Progress in olefin polymerization catalysts and polyolefin materials, in: Proceedings of the First Asian Polyolefin Workshop, Nara, Japan, December 7–9, 2005, 1st ed., Elsevier, Amsterdam, Boston, 2006.
60. Turi · 1997
61. Fracture analysis of annealed PVDF films10.1016/j.polymertesting.2008.01.006 ↗
62. Wunderlich · 1980
63. Ehrenstein · 1998
64. Crystallinity in chemically crosslinked low density polyethylenes: 2. crystallization kinetics10.1016/0032-3861(86)90261-2 ↗
65. The influence of crosslinking on isothermal crystallization of LDPE filled with silica10.1016/0014-3057(92)90149-V ↗
66. An investigation of chemical crosslinking effect on properties of high-density polyethylene10.1016/S0032-3861(03)00363-X ↗
67. Role of oxygen diffusion in polymer ageing: kinetic and mechanical aspects10.1007/BF00445968 ↗
68. F.J. Pern, A.W. Czanderna, EVA degradation mechanisms simulating those in PV modules, in: Proceedings of the Photovoltaic Advanced Research and Development Project, Denver, Colorado, USA, 1992, pp. 445–452.10.1063/1.42901 ↗
69. Characterization of the aging behavior of polyethylene by photoluminescence spectroscopy10.1016/j.polymdegradstab.2014.04.030 ↗
70. A study of parameters interfering in oxidative induction time (OIT) results obtained by differential scanning calorimetry in polyolefin10.1016/S0142-9418(99)00022-7 ↗
71. Aging behavior of polymeric solar absorber materials – Part 2: commodity plastics10.1016/j.solener.2010.04.007 ↗
72. Degradation behaviour of polymer blends and thermal treatment of polymer waste
73. Effect of catalyst residues on the chain structure and properties of a Phillips type polyethylen10.1002/pen.11275 ↗
74. Thermoanalytical studies of rubber oxidation: Correlation of activation energy, isothermal induction time and oxidation peak temperature10.1016/0040-6031(84)87067-7 ↗
75. Thermal degradation of EVA and EBA—A comparison. II. Changes in unsaturation and side group structure10.1002/app.1991.070430918 ↗
76. Artificial aging of high-density polyethylene by ultraviolet irradiation10.1016/S0014-3057(00)00251-2 ↗
77. Aspects of the thermal oxidation, yellowing and stabilisation of ethylene vinyl acetate copolymer10.1016/S0141-3910(00)00111-7 ↗
78. Oreśki · 2008
79. Radiation-induced degradation of polyethylene: role of amorphous region in the formation of oxygenated products and the mechanical properties10.1016/0141-3910(86)90064-9 ↗
80. Infrared spectrophotometric studies on polyethylene. II. Oxidation10.1002/pol.1954.120137202 ↗
81. Effect of UV aging on degradation of ethylene-vinyl acetate (EVA) as encapsulant in photovoltaic (PV) modules