journal article·2016-08

Electrostatic nanoassembly of contact interfacial layer for enhanced photovoltaic performance in polymer solar cells

Gopalan Sai-Anand, Anantha-Iyengar Gopalan, Kwang-Pill Lee, Swaminathan Venkatesan, Qiquan Qiao, Byoung-Ho Kang, Sang-Won Lee, Jae-Sung Lee, Shin-Won Kang

Publisher page

Abstract

Abstract Improved performance in the bulk heterojunction (BHJ) polymer solar cells (PSCs) can be achieved through multiple mechanisms by tuning the structure of the components and design architecture. Therefore, in this study, we designed and fabricated an electrostatically assembled contact interfacial layer utilizing the electrostatic interactions between positively charged poly(diallyldimethylammonium chloride) (PDDA) and negatively charged sulfonate ions in a polymer, i.e. toluene sulfonic acid incorporated self-doped polyaniline (SPAN(TSA−)) (designated as SPAN(TSA−)/EA−CIL). We investigated the influence of SPAN(TSA−)/EA−CIL on the photovoltaic performance of BHJ PSCs. We adopted a simple “dip-dry” technique to fabricate the SPAN(TSA−)/EA−CIL. Cyclic Voltammetry, X-ray photoelectron spectroscopy, Ultraviolet-visible spectroscopy, water contact angle measurements, electrochemical impedance spectroscopy and atomic force microscopy were employed to characterize the new SPAN(TSA−)/EA−CIL and to elucidate the associated enhancements in the photovoltaic performance. The fabricated PSCs with the SPAN(TSA−)/EA-CILs exhibited an improved photoconversion efficiency (PCE) through enhancement of both the short-circuit current density (JSC) and fill factor compared to the device consisting of only SPAN(TSA−) or PEDOT:PSS. A plausible mechanism is presented here that explains the enhanced JSC and PCE in terms of transient dipole induction at the SPAN(TSA−)/EA-CIL surface. Interestingly, the PCE of devices based on ITO/SPAN(TSA−)/EA-CIL(1:1)/P3HT:PC60BM/Al and ITO/SPAN(TSA−)/EA-CIL(1:1)/PBDTTT-C-T:PC70BM/Al was enhanced by 13% (3.19–3.67%) and 10% (5.11–5.60%) compared to those of devices based on ITO/PEDOT:PSS/P3HT:PC60BM/Al and ITO/PEDOT:PSS/PBDTTT-C-T:PC70BM/Al, respectively. The present work thus identifies a novel class of low-temperature processable interface layer with a potential to fabricate highly efficient photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (90)

Show source-provided references
1. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Time-resolved electrostatic force microscopy of polymer solar cells10.1038/nmat1712 ↗
4. Critical role of domain crystallinity, domain purity and domain interface sharpness for reduced bimolecular recombination in polymer solar cells10.1016/j.nanoen.2014.12.027 ↗
5. Interplay of nanoscale domain purity and size on charge transport and recombination dynamics in polymer solar cells10.1039/C3NR05177C ↗
6. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution10.1039/C4EE00446A ↗
7. Low temperature efficient interconnecting layer for tandem polymer solar cells10.1016/j.nanoen.2014.09.026 ↗
8. Mild wetting poor solvent induced hydrogen bonding interactions for improved performance in bulk heterojunction solar cells10.1039/C3TA13875E ↗
9. Organic solar cells using a high-molecular-weight benzodithiophene–benzothiadiazole copolymer with an efficiency of 9.4%10.1002/adma.201403080 ↗
10. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
11. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
12. Highly efficient tandem polymer solar cells with a photovoltaic response in the visible light range10.1002/adma.201404525 ↗
13. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
14. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
15. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
16. Electrostatically self-assembled nonconjugated polyelectrolytes as an ideal interfacial layer for inverted polymer solar cells10.1002/adma.201200594 ↗
17. Properties of interlayer for organic photovoltaics10.1016/j.mattod.2013.10.001 ↗
18. Solution-processed cathode interfacial layer materials for high-efficiency polymer solar cells10.1016/j.mattod.2015.02.016 ↗
19. PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
20. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
21. Ultrathin polyaniline-based buffer layer for highly efficient polymer solar cells with wide applicability10.1038/srep06570 ↗
22. A futuristic strategy to influence the solar cell performance using fixed and mobile dopants incorporated sulfonated polyaniline based buffer layer10.1016/j.solmat.2015.05.035 ↗
23. Conductive conjugated polyelectrolyte as hole-transporting layer for organic bulk heterojunction solar cells10.1002/adma.201302845 ↗
24. Cathode modification of polymer solar cells by electrostatically self-assembled zwitterionic non-conjugated polyelectrolyte10.1016/j.synthmet.2015.08.030 ↗
25. Organic photovoltaic devices with a crosslinkable polymer interlayer10.1016/j.solmat.2011.05.044 ↗
26. Few-layered graphene quantum dots as efficient hole-extraction layer for high-performance polymer solar cells10.1016/j.nanoen.2015.04.019 ↗
27. Simple synthesis of solution-processable oxygen-enriched graphene as anode buffer layer for efficient organic solar cells10.1016/j.orgel.2015.09.015 ↗
28. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells10.1039/C4EE03802A ↗
29. Solution processable self-doped polyaniline as hole transport layer for inverted polymer solar cells10.1039/c1jm12019k ↗
30. Block copolymer based composition and morphology control in nanostructured hybrid materials for energy conversion and storage: solar cells, batteries, and fuel cells10.1039/C0CS00034E ↗
31. Nanoparticle polymer composites: where two small worlds meet10.1126/science.1130557 ↗
32. Fabrication approaches for generating complex micro- and nanopatterns on polymeric surfaces10.1021/cr050018y ↗
33. Patterning surfaces with functional polymers10.1038/nmat2109 ↗
34. Photovoltaic heterostructure devices made of sequentially adsorbed poly (phenylene vinylene) and functionalized C6010.1063/1.1290723 ↗
35. Multi-charged conjugated polyelectrolytes as a versatile work function modifier for organic electronic devices10.1002/adfm.201301810 ↗
36. High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer10.1021/ja408363c ↗
37. Anode interfacial tuning via electron-blocking/hole-transport layers and indium tin oxide surface treatment in bulk-heterojunction organic photovoltaic cells10.1002/adfm.200901045 ↗
38. Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes10.1063/1.3522893 ↗
39. Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes10.1039/b921775d ↗
40. Electronic properties of conjugated polyelectrolyte thin films10.1021/ja801451e ↗
41. Inverted and transparent polymer solar cells prepared with vacuum-free processing10.1016/j.solmat.2008.11.002 ↗
42. Recent applications of conjugated polyelectrolytes in optoelectronic devices10.1002/adma.200800533 ↗
43. Nonconjugated anionic polyelectrolyte as an interfacial layer for the organic optoelectronic devices10.1021/am400478b ↗
44. Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte10.1038/nphoton.2015.126 ↗
45. Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells10.1039/c3cs60200a ↗
46. Adjusting the ion permeability of polyelectrolyte multilayers through layer-by-layer assembly under a high gravity field10.1021/acsami.5b02179 ↗
47. Insight into fractal self-assembly of poly(diallyldimethylammonium chloride)/sodium carboxymethyl cellulose polyelectrolyte complex nanoparticles10.1021/jp2040423 ↗
48. Anisometric polyelectrolyte/mixed surfactant nanoassemblies formed by the association of poly(diallyldimethylammonium chloride) with sodium dodecyl sulfate and dodecyl maltoside10.1021/acs.langmuir.5b01280 ↗
49. Nanostructured micellar films formed via layer-by-layer deposition of photoactive polymer10.1021/la800098r ↗
50. Spray-coated polymer solar cells based on low-band-gap donors processed with ortho-xylene10.1002/ente.201402059 ↗
51. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
52. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
53. High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes10.1039/c3ee41077c ↗
54. Salt-induced charge screening and significant conductivity enhancement of conducting poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate)10.1021/ma900327d ↗
55. Highly efficient, inverted polymer solar cells with indium tin oxide modified with solution-processed zwitterions as the transparent cathode10.1021/am201844q ↗
56. Inhomogeneous structure of collapsed polymer brushes under deformation10.1021/ma00129a021 ↗
57. Coil-globule type transitions in polymers. 1. Collapse of layers of grafted polymer chains10.1021/ma00001a023 ↗
58. Swelling of a polymer brush by a poor solvent10.1002/polb.20257 ↗
59. Fabrication of a novel layer-by-layer film based glucose biosensor with compact arrangement of multi-components and glucose oxidase10.1016/j.bios.2009.03.013 ↗
60. A sensitive hydrazine hydrate sensor based on a mercaptomethyl-terminated trinuclear Ni (ii) complex modified gold electrode10.1039/C5RA23809A ↗
61. Dissolved argon changes the rate of diffusion in room temperature ionic liquids: effect of the presence and absence of argon and nitrogen on the voltammetry of ferrocene10.1021/jp9015849 ↗
62. Electron transfer reactions of self-assembled monolayers of thio(phenylacetylene)n-substituted chiral metal−salen complexes10.1021/la015715+ ↗
63. Voltammetric peak broadening for cytochrome c/alkanethiolate monolayer structures: dispersion of formal potentials10.1021/la960650+ ↗
64. Systematic investigation of nanoscale adsorbate effects at organic light-emitting diode interfaces. Interfacial structure-charge injection-luminance relationships10.1021/cm0604918 ↗
65. The work function of doped polyaniline nanoparticles observed by Kelvin probe force microscopy10.1088/0957-4484/23/36/365705 ↗
66. Camphorsulfonic acid fully doped polyaniline emeraldine salt: conformations in different solvents studied by an ultraviolet/visible/near-infrared spectroscopic method10.1021/cm00051a002 ↗
67. Role of protonic and charge transfer doping in solid-state polyaniline10.1021/jp026091z ↗
68. High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer10.1038/srep04691 ↗
69. Role of solvent and secondary doping in polyaniline films doped with chiral camphorsulfonic acid: preparation of a chiral metal10.1021/cm011567x ↗
70. Charge transport of lithium-salt-doped polyaniline10.1103/PhysRevB.64.035101 ↗
71. Interactions between multiwall carbon nanotubes and poly (diallyl dimethylammonium) chloride: effect of the presence of a surfactant10.1021/jp3116534 ↗
72. Nb2O5 as a new electron transport layer for double junction polymer solar cells10.1039/c2cp22627h ↗
73. Highly conductive PEDOT:PSS treated with formic acid for ITO-free polymer solar cells10.1021/am405024d ↗
74. “Solvent annealing” effect in polymer solar cells based on poly (3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
75. Predicting the J–V curve in organic photovoltaics using impedance spectroscopy10.1002/aenm.201400499 ↗
76. Unraveling the effect of polymer dots doping in inverted low bandgap organic solar cells10.1039/C5CP01722J ↗
77. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
78. Polymer solar cells10.1038/nphoton.2012.11 ↗
79. Polymer solar cells that use self-assembled‐monolayer-modified ZnO/metals as cathodes10.1002/adma.200703050 ↗
80. Self-assembled monolayer modified ZnO/metal bilayer cathodes for polymer/fullerene bulk-heterojunction solar cells10.1063/1.2919524 ↗
81. Enhanced power-conversion efficiency in inverted bulk heterojunction solar cells using liquid-crystal-conjugated polyelectrolyte interlayer10.1021/acsami.5b03340 ↗
82. Inside cover: elucidating the role of conjugated polyelectrolyte interlayers for high-efficiency organic photovoltaics (ChemSusChem 18/2015)
83. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
84. Surface modification of metal oxide using ionic liquid molecules in hybrid organic–inorganic optoelectronic devices10.1039/c0jm03688a ↗
85. Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer10.1021/ja2037673 ↗
86. Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers10.1038/ncomms9929 ↗
87. On the interaction of aliphatic amines and ammonium ions with carboxylic acids in solution and in receptor pockets10.1021/jp300588q ↗
88. Toward control of the metal-organic interfacial electronic structure in molecular electronics: a first-principles study on self-assembled monolayers of π-conjugated molecules on noble metals10.1021/nl0629106 ↗
89. The critical choice of PEDOT:PSS additives for long term stability of roll-to-roll processed OPVs10.1002/aenm.201401912 ↗
90. Interfacial layer engineering for performance enhancement in polymer solar cells10.3390/polym7020333 ↗