journal article·2016-01

All-solution processed double-decked PEDOT:PSS/V2O5 nanowires as buffer layer of high performance polymer photovoltaic cells

Jing Pan, Ping Li, Lun Cai, Yi Hu, Yujun Zhang

Publisher page

Abstract

Abstract In this study, a high performance organic–inorganic polymer photovoltaic device with double-decked anode buffer layer sandwiched between indium tin oxide (ITO) and the photoactive layer is reported. The double-decked buffer layer is fabricated by coating vanadium oxide (V2O5) nanowire on top of the PEDOT:PSS layer and the reported device has the structure of ITO/PEDOT:PSS/V2O5/P3HT:PCBM/Al. The power conversion efficiency (PCE) of polymer photovoltaic cells with the hybrid buffer layer is improved by 14.10% compared to the polymer photovoltaic cell commonly employed PEDOT:PSS hole transporting material; and PCE of this proposed polymer photovoltaic cell is improved by 30.40% compared with the polymer photovoltaic cell employed V2O5 powder as buffer layer. The improvement of PCE is mainly caused by the elevation of short circuit current density (Jsc) instead of the open circuit voltage (Voc). Experimental results show that layer of V2O5 nanowires cannot only block electron from wrong directions efficiently, but also increase incident light paths in the hybrid buffer layers due to refraction and reflection. And pseudo texturing effects of V2O5 nanowires which result in higher photon absorptivity of the photoactive layer make polymer photovoltaic cells with this double-decked buffer layer outperform that with buffer layers constructed by either PEDOT:PSS or V2O5 nanowires only.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Organic small molecule solar cells with a homogeneously mixed copper phthalocyanine: C 60 active layer10.1063/1.1755833 ↗
3. Morphology and thermal stability of the active layer in poly (p-phenylenevinylene)/methanofullerene plastic photovoltaic devices10.1021/ma035620+ ↗
4. Luminescent layers for enhanced silicon solar cell performance: down-conversion10.1016/j.solmat.2005.07.001 ↗
5. Modifying the solar spectrum to enhance silicon solar cell efficiency—an overview of available materials10.1016/j.solmat.2006.09.003 ↗
6. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
7. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
8. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
9. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
10. The changing face of PEDOT: PSS films: substrate, bias, and processing effects on vertical charge transport10.1021/jp711838h ↗
11. Three-dimensional inhomogeneities in PEDOT: PSS films10.1021/jp0464674 ↗
12. The effects of solvents on the morphology and sheet resistance in poly (3, 4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films10.1016/S0379-6779(02)01259-6 ↗
13. Highly conductive PEDOT: PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
14. An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
15. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
16. All solution processed tandem polymer solar cells based on thermocleavable materials10.1016/j.solmat.2008.05.005 ↗
17. Room-temperature ultraviolet nanowire nanolasers10.1126/science.1060367 ↗
18. Nanowire dye-sensitized solar cells10.1038/nmat1387 ↗
19. Centimeter-Long V2O5 nanowires: from synthesis to field-emission, electrochemical electrical transport, and photoconductive properties10.1002/adma.200903586 ↗
20. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
21. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
22. Electroluminescence of hole block material caused by electron accumulation and hole penetration10.1021/jp805088v ↗
23. Microscale solar cells for high concentration on polycrystalline Cu (In, Ga) Se2 thin films10.1063/1.3604789 ↗