journal article·2011-01

Finite element method for computational fluid dynamics to design photovoltaic thermal (PV/T) system configuration

Rattanasuda Naewngerndee, Ekkachart Hattha, Kamonpan Chumpolrat, Tongpool Sangkapes, Jiraphong Phongsitong, Sirimongkhol Jaikla

Publisher page

Abstract

Abstract This study focuses on the optimal configuration and suitable flow rate in photovoltaic thermal (PV/T) system. Design and verification were carried out by finite element method (FEM) to solve computational fluid dynamic (CFD) problem and to determine the suitable flow in a collector system. COMSOL MULTIPHYSICS® software was used for the analysis. The computed results were then comparatively evaluated against a set of result samples obtained from testing data of the 16 modules of PV/T system—a configuration with 4 strings (horizontal-axis) of 4 modules in-series (vertical-axis) (4×4). The redesign of PV/T system was further studied by changing the system configuration from a 4×4 configuration to simulate various configurations consisting of 8×2, 3×4, 4×3 and 6×2. For the same number of PV/T module (16), the 4×4 configuration provided better flow distribution, when compared with an 8×2 configuration. When decreasing to 12 modules, it was shown that the 3×4 configuration resulted in the most suitable flow distribution, compared with the 4×3 and 6×2 configurations. From these results, it can be concluded that the number of strings used was inversely proportional to the flow distribution quality. Experimental results have also shown that the optimized flow rate for the 4×4 configuration was approximately 1–3 L/min.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Solar Radiation and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Photovoltaic thermal (PV/T) collectors: a review10.1016/j.applthermaleng.2006.06.007 ↗
2. H.A. Zondag, M.J.M. Jong, W.G.J. Van Helden. Development and applications for PV thermal, In:17th EPSEC 2001, Munich, 2001
3. The thermal and electrical yield of a PV-thermal collector10.1016/S0038-092X(01)00094-9 ↗
4. Performance studies on a finned double-pass photovoltaic-thermal (PV/T) solar collector10.1016/j.desal.2007.04.007 ↗
5. Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater10.1016/j.solener.2008.02.005 ↗
6. Analytical expression for electrical efficiency of PV/T hybrid air collector10.1016/j.apenergy.2008.09.003 ↗
7. Indoor simulation and testing of photovoltaic thermal (PV/T) air collectors10.1016/j.apenergy.2009.03.013 ↗