Radiation stability of mixed tin–lead halide perovskites: Implications for space applications
Source abstract
Abstract
Abstract Mixed organic-inorganic halide perovskite solar cells (PSCs) have received considerable attention in recent years for their impressive solar to electrical power efficiency gains and potentially lower material and processing costs for optoelectronic applications. In addition to terrestrial applications, PSCs are of interest to the space power markets for their low cost, low weight, adaptability to flexible architectures, and tolerance to high energy particle irradiation (mainly protons and electrons). Here we investigate the properties of mixed formamidinium-methylammonium tin-lead iodide (FASn)0.6(MAPb)0.4I3 perovskites which lower the lead content as well as the bandgap, making them attractive for the low bandgap absorber material in tandem PSCs. Through current density-voltage (JV) characterization at lower temperatures, majority carrier transport is hindered and a barrier to photogenerated carrier extraction is evident. This is attributed to the thermally induced change of the bandgap of the absorber layer relative to the energy selective contacts in the device. We find that although the architecture used here hinders the performance at temperatures below 225 K, the tolerance to high energy (3.7 MeV) protons is impressive, considerably out-performing commercially available thin-film CIGS. These results suggest further improvements to structural and interface stability as well as lightweight encapsulation could lead to all perovskite flexible tandem arrays deployed for power generation on missions to low Earth orbit, the moon, Mars, and beyond.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. National Renewable Energy Laboratory Research Cell Record Efficiency Chart. Best Research-Cell Efficiencies 2021.
2. Band-gap tuning of lead halide perovskites using a sequential deposition process10.1039/C4TA00435C ↗
3. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
4. Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors10.1038/s41560-018-0190-4 ↗
5. Fundamental losses in solar cells10.1002/pip.1024 ↗
6. Triple-halide wide-band gap perovskites with suppressed phase segregation for efficient tandems10.1126/science.aaz5074 ↗
7. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
8. Energy yield of all thin-film perovskite/CIGS tandem solar modules10.1002/pip.3091 ↗
9. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells10.1039/C9EE02268F ↗
10. High-performance perovskite/Cu(In,Ga)Se2 monolithic tandem solar cells10.1126/science.aat5055 ↗
11. Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
12. Low-bandgap mixed tin–lead iodide perovskites with reduced methylammonium for simultaneous enhancement of solar cell efficiency and stability10.1038/s41560-020-00692-7 ↗
13. Perovskite-perovskite tandem photovoltaics with optimized band gaps10.1126/science.aaf9717 ↗
14. Highly efficient perovskite–perovskite tandem solar cells reaching 80% of the theoretical limit in photovoltage10.1002/adma.201702140 ↗
15. Overcoming redox reactions at perovskite-nickel oxide interfaces to boost voltages in perovskite solar cells10.1016/j.joule.2020.06.004 ↗
16. New-age satellite-based navigation -- STAN: simultaneous tracking and navigation with LEO satellite signals
17. Cathodoluminescence study of 68 MeV proton-irradiated ultra-thin GaAs solar cells
18. Study of power options for Jupiter and outer planet missions
19. Radiation hardness and self-healing of perovskite solar cells10.1002/adma.201603326 ↗
20. Defect dynamics in proton irradiated CH3NH3PbI3 perovskite solar cells10.1002/aelm.201600438 ↗
21. Efficient minority carrier detrapping mediating the radiation hardness of triple-cation perovskite solar cells under proton irradiation10.1039/C9EE00077A ↗
22. Proton radiation hardness of perovskite tandem photovoltaics10.1016/j.joule.2020.03.006 ↗
23. Tolerance of perovskite solar cell to high-energy particle irradiations in space environment10.1016/j.isci.2018.03.020 ↗
24. Proton irradiation tolerance of high-efficiency perovskite absorbers for space applications10.1021/acs.jpclett.9b02665 ↗
25. Nickel · 2018
26. Effects of electron and proton radiation on perovskite solar cells for space solar power application
27. Ab initio design of CsSn(XxY 1−x)3 (X and Y = Cl, Br, and I) perovskites for photovoltaics10.1063/1.4927503 ↗
28. Lead-free tin-halide perovskite solar cells with 13% efficiency10.1016/j.nanoen.2020.104858 ↗
29. High open-circuit voltages in tin-rich low-bandgap perovskite-based planar heterojunction photovoltaics10.1002/adma.201604744 ↗
30. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
31. The role of metastability and concentration on the performance of CIGS solar cells under Low-Intensity-Low-Temperature conditions10.1016/j.solmat.2020.110571 ↗
32. Flexible Cu(in,Ga)Se2 solar cells for outer planetary missions: investigation under low-intensity low-temperature conditions10.1109/JPHOTOV.2018.2889179 ↗
33. Fabrication of efficient low-bandgap perovskite solar cells by combining formamidinium tin iodide with methylammonium lead iodide10.1021/jacs.6b08337 ↗
34. Srim – the stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
35. An overview of the facilities, activities, and developments at the university of North Texas ion beam modification and analysis laboratory (IBMAL)10.1063/1.4813454 ↗
36. Surface-activated corrosion in tin-lead halide perovskite solar cells10.1021/acsenergylett.0c01445 ↗
37. Metal composition influences optoelectronic quality in mixed-metal lead–tin triiodide perovskite solar absorbers10.1039/D0EE00132E ↗
38. Design of low bandgap tin–lead halide perovskite solar cells to achieve thermal, atmospheric and operational stability10.1038/s41560-019-0471-6 ↗
39. Temperature dependence of the band gap of perovskite semiconductor compound CsSnI310.1063/1.3638699 ↗
40. Interplay of structural and optoelectronic properties in formamidinium mixed tin–lead triiodide perovskites10.1002/adfm.201802803 ↗
41. Phonon anharmonicity, lifetimes, and thermal transport in CH3NH3PbI3 from many-body perturbation theory10.1103/PhysRevB.94.220301 ↗
42. S-shaped current–voltage characteristics in solar cells: a review10.1109/JPHOTOV.2019.2930409 ↗
43. Crystal structure evolution and notable thermal expansion in hybrid perovskites formamidinium tin iodide and formamidinium lead bromide10.1021/acs.inorgchem.7b02576 ↗
44. Equal footing of thermal expansion and electron–phonon interaction in the temperature dependence of lead halide perovskite band gaps10.1021/acs.jpclett.9b00876 ↗
45. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗
46. The temperature-dependent microstructure of PEDOT/PSS films: insights from morphological, mechanical and electrical analyses10.1039/C4TC01593B ↗
47. Choose your own adventure: fabrication of monolithic all-perovskite tandem photovoltaics10.1002/adma.202003312 ↗
48. Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells10.1126/science.aav7911 ↗
49. Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn(ii) oxidation in precursor ink10.1038/s41560-019-0466-3 ↗
50. Enabling flexible all-perovskite tandem solar cells10.1016/j.joule.2019.05.009 ↗
51. Four-Terminal all-perovskite tandem solar cells achieving power conversion efficiencies exceeding 23%10.1021/acsenergylett.7b01287 ↗
52. Efficient two-terminal all-perovskite tandem solar cells enabled by high-quality low-bandgap absorber layers10.1038/s41560-018-0278-x ↗
53. Vacuum-assisted growth of low-bandgap thin films (FA0.8MA0.2Sn0.5Pb0.5I3) for all-perovskite tandem solar cells10.1002/aenm.201902583 ↗
54. New radiation environment and effects models in the European space agency's space environment information system (SPENVIS)
55. Self-healing inside APbBr3 halide perovskite crystals10.1002/adma.201706273 ↗
56. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
57. Defect-mediated metastability and carrier lifetimes in polycrystalline (Ag,Cu)(In,Ga)Se2 absorber materials10.1063/1.5134502 ↗
58. Tin versus lead redox chemistry modulates charge trapping and self-doping in tin/lead iodide perovskites10.1021/acs.jpclett.0c00725 ↗
59. Photon recycling in lead iodide perovskite solar cells10.1126/science.aaf1168 ↗
60. Lead halides join the top optoelectronic league10.1126/science.aaf4603 ↗
61. Quantification of re-absorption and re-emission processes to determine photon recycling efficiency in perovskite single crystals10.1038/ncomms14417 ↗
62. Potential of high-stability perovskite solar cells for low-intensity–low-temperature (LILT) outer planetary space missions10.1021/acsaem.8b01882 ↗
63. The effects of doping density and temperature on the optoelectronic properties of formamidinium tin triiodide thin films10.1002/adma.201804506 ↗
64. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
65. Bockstedte · 1996
66. Gas chromatography–mass spectrometry analyses of encapsulated stable perovskite solar cells10.1126/science.aba2412 ↗
67. Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling10.1039/C7EE02564E ↗
68. Encapsulation of organic and perovskite solar cells: a review10.3390/coatings9020065 ↗