journal article·2017-01

Different nucleation approaches for production of high-performance multi-crystalline silicon ingots and solar cells

Iryna Buchovska, Oleksandr Liaskovskiy, Timur Vlasenko, Sergey Beringov, Frank M. Kiessling

Publisher page

Abstract

Abstract Two different process approaches for growing high-performance multi-crystalline silicon (HPM-Si) material for photovoltaic applications are presented. Assisted nucleation was achieved by seeding on fine polycrystalline silicon chunks and on a rough silica crucible bottom, respectively. For each of the two methods industrially sized ingots of 650 kg were directionally solidified. Wafers of these ingots and those from conventionally solidified multi-crystalline (mc) silicon ingots were used to produce solar cells on industrial line. Solar cell parameters were analyzed and compared. Both assisted nucleation methods are suitable for industrial growing of HPM-Si ingots. The grain size is more homogeneously distributed resulting in improved material quality. Less dislocation clustering results in higher average conversion efficiency of solar cells compared to those made of conventionally solidified mc-Si material. Moreover, it is also experimentally proven that assisted nucleation procedure is effective for both Siemens polysilicon feedstock and cheaper solar grade silicon. Further improvements of nucleation procedures, which can be used to achieve higher conversion solar cell efficiency and lower product cost, are proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. G. Müller, J. Friedrich, Optimization and modeling of photovoltaic silicon crystallization processes, selected topics on crystal growth, AIP Conf. Proc. 1270, 2010, pp. 255–281.
2. Silicon feedstock for the multi-crystalline photovoltaic industry10.1016/S0927-0248(01)00147-7 ↗
3. Silicon for photovoltaic applications10.1016/j.mseb.2006.06.054 ↗
4. study of SiC particles and filaments precipitated in multicrystalline Si for solar cells10.1016/j.solmat.2008.04.016 ↗
5. About the formation and avoidance of C and N related precipitates during directional solidification of multi-crystalline silicon from contaminated feedstock10.1016/j.jcrysgro.2010.02.003 ↗
6. Hard inclusions and their detrimental effects on the wire sawing process of multicrystalline silicon10.1016/j.solmat.2007.06.001 ↗
7. Electronic activity of SiC precipitates in multicrystalline solar silicon10.1002/pssa.200675436 ↗
8. Transition metals in photovoltaic-grade ingot-cast multicrystalline silicon: Assessing the role of impurities in silicon nitride crucible lining material10.1016/j.jcrysgro.2005.11.053 ↗
9. Characterization of high-efficiency multi-crystalline silicon in industrial production10.1016/j.solmat.2013.06.013 ↗
10. Seed-assisted growth of high-quality multi-crystalline silicon in directional solidification10.1016/j.jcrysgro.2013.09.051 ↗
11. Study of evolution of dislocation clusters in high performance multicrystalline silicon10.1016/j.solmat.2014.02.034 ↗
12. Grain control in directional solidification of photovoltaic silicon10.1016/j.jcrysgro.2012.01.007 ↗
13. An enhanced cooling design in directional solidification for high quality multi-crystalline solar silicon10.1016/j.jcrysgro.2011.12.045 ↗
14. Grain control using spot cooling in multi-crystalline silicon crystal growth10.1016/j.jcrysgro.2008.10.064 ↗
15. High-quality multi-crystalline silicon (mc-Si) grown by directional solidification using notched crucibles10.1016/j.jcrysgro.2010.10.090 ↗
16. Effect of crucible coating on the grain control of multi-crystalline silicon crystal growth10.1016/j.jcrysgro.2012.10.052 ↗
17. M. Schumann, P. Mück, F. Haas, S. Riepe, An experimental access to the coating influence on multicrystalline silicon materials, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010.
18. T. Ervik, B.R. Henriksen, A.-K. Søyland, F.M. Kießling: Coating effects on the defect structure of multicrystalline silicon ingot and its comparison to high-performance MC-Si, in: Proceedings of the 8th International Workshop on Crystalline Silicon for Solar Cells, Bamberg, Germany, 2015.
19. F.-M. Kiessling, N. Dropka, Ch. Frank-Rotsch, W. Kwapil, S. Meyer, St. Riepe, C. Schmid, M. Schumann: Influence of crucible quality on directionally solidified mc-Si ingot properties, in: Proceedings of the 4th European Conference on Crystal Growth (ECCG-4), Glasgow, UK, 2012.
20. I. Buchovska, O. Liaskovskiy, S. Yatsuk, T. Vlasenko, S. Beringov, High-quality Silicon mono-like ingots and wafers obtained by improved directional solidification process, in: Proceedings of the 6th International Workshop on Crystalline Silicon for solar Cells, Aix-les-Bains, France, 2012.
21. Influence of the feedstock purity on the solar cell efficiency10.1016/j.solmat.2014.04.003 ↗