journal article·2014-01

Multiple stress degradation analysis of the active layer in organic photovoltaics

Vida Turkovic, Sebastian Engmann, Daniel A.M. Egbe, Marcel Himmerlich, Stefan Krischok, Gerhard Gobsch, Harald Hoppe

Publisher page

Abstract

Abstract Under general working conditions, organic solar cells are exposed to a multitude of degradative stresses, including light, oxygen, temperature and humidity. We selectively exposed the layer stacks of three different material systems, P3HT, PCDTBT and AnE-PVcc in bulk heterojunction with fullerene, to different combinations of stresses, starting from one single stress and then iteratively adding a new stress to the combination. This allowed us to determine how harshly different polymers get affected by individual stress factors. P3HT based devices show an overall higher stability compared to PCDTBT or AnE-PVcc. All of the devices are affected the most by combined influences of light, oxygen, humidity and temperature, and they cease functioning within a couple of hours of exposure. A thermodynamically driven formation of a thin PCBM layer at the anode is observed with the prolonged storage, which causes an increase in the current densities for the large reverse voltages. We explain this phenomenon by tunneling from the fullerene HOMO to the LUMO, as a result of a large gradient in the electric potential over this layer. The increase of open circuit voltage of the pre-annealed P3HT devices upon UV photolysis was investigated, and attributed to the UV irradiation facilitated destruction of the face-on P3HT layer grown on the surface of the active layer. The effect of the sequence in which the annealing step is performed with respect to evaporation and degradation on the performance upon degradation is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Manufacture, integration and demonstration of polymer solar cells in a lamp for the Lighting Africa initiative10.1039/b918441d ↗
2. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
3. Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality10.1364/OE.18.00A272 ↗
4. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
5. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
6. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
7. Ultrathin and lightweight organic solar cells with high flexibility10.1038/ncomms1772 ↗
8. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
9. Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing10.1016/j.solmat.2011.09.048 ↗
10. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
11. Life-cycle analysis of product integrated polymer solar cells10.1039/c1ee01127h ↗
12. Dual-function semiconducting polymer devices - light-emitting and photodetecting diodes10.1063/1.111885 ↗
13. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
14. Semiconducting polymers: the third generation10.1039/b914956m ↗
15. Conjugated polymers for high-efficiency organic photovoltaics10.1039/B9PY00325H ↗
16. pi-conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
17. Organic electronics from perylene to organic photovoltaics: painting a brief history with a broad brush10.1039/b921677d ↗
18. Outlook Brightens for Plastic Solar Cells10.1126/science.332.6027.293 ↗
19. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
20. Stability of polymer solar cells10.1002/adma.201104187 ↗
21. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
22. Aging of a donor conjugated polymer: Photochemical studies of the degradation of poly 2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene10.1002/pola.21815 ↗
23. Durability of MDMO–PPV and MDMO–PPV: PCBM blends under illumination in the absence of oxygen10.1016/j.solmat.2007.12.003 ↗
24. Reactive intermediates in the initiation step of the photo-oxidation of MDMO–PPV10.1002/pola.23628 ↗
25. Involvement of singlet oxygen in the solid-state photochemistry of P3HT10.1002/marc.200800421 ↗
26. The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered10.1016/j.polymdegradstab.2009.03.005 ↗
27. Further insights into the photodegradation of poly(3-hexylthiophene) by means of X-ray photoelectron spectroscopy10.1016/j.tsf.2010.06.042 ↗
28. Wavelength-dependent pathways of poly-3-hexylthiophene photo-oxidation10.1021/cm3008864 ↗
29. Photodegradation of P3HT—A systematic study of environmental factors10.1021/cm102373k ↗
30. Singlet oxygen as a reactive intermediate in the photodegradation of an electroluminescent polymer10.1021/ja00146a004 ↗
31. Singlet oxygen as a reactive intermediate in the photodegradation of phenylenevinylene oligomers10.1021/cm9807687 ↗
32. Photooxidative degradation mechanism of model compounds of poly(p-phenylenevinylenes) PPVs10.1016/S0301-0104(02)00691-2 ↗
33. Mechanisms of photodegradation of poly(3-alkylthiophenes) in solution10.1021/ma00063a047 ↗
34. Solid-state photochemistry of pi-conjugated poly(3-alkylthiophenes)10.1139/v95-234 ↗
35. Reversible and irreversible degradation of organic solar cell performance by oxygen, Sol
36. Reversible and irreversible light-induced p-doping of P3HT by oxygen studied by photoelectron spectroscopy (XPS/UPS)10.1021/jp2032737 ↗
37. Dynamics and reversibility of oxygen doping and de-doping for conjugated polymer10.1063/1.2917419 ↗
38. Oxygen doping of P3HT:PCBM blends: influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
39. Reversible and irreversible interactions of poly(3-hexylthiophene) with oxygen studied by spin-sensitive methods10.1021/jp2077215 ↗
40. Anthracene based conjugated polymers: correlation between π−π-stacking ability, photophysical properties, charge carrier mobility, and photovoltaic performance10.1021/ma902273s ↗
41. Anthracene-containing PPE–PPV copolymers: effect of side-chain nature and length on photophysical and photovoltaic properties10.1002/pssa.200925398 ↗
42. Morphology evaluation of a polymer-fullerene bulk heterojunction ensemble generated by the fullerene derivatization10.1039/c2jm32629a ↗
43. Polymer BHJ solar cell performance tuning by C60 fullerene derivative alkyl side-chain length, J10.1002/polb.23141 ↗
44. Charge carrier mobility, photovoltaic, and electroluminescent properties of anthracene-based conjugated polymers bearing randomly distributed side chains10.1002/pola.26133 ↗
45. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
46. Spectroscopic studies of soluble poly(3-alkylthienylenes)10.1021/ma00167a038 ↗
47. Electronic properties of organic semiconductor blends: ambipolar mixtures of phthalocyanine and fullerene10.1063/1.2742640 ↗
48. Morphology and photochemical stability of P3HT:PCBM active layers of organic solar cells10.1051/epjap/2011110132 ↗
49. The effect of Al electrodes on the nanostructure of poly(3-hexylthiophene): fullerene solar cell blends during thermal annealing10.1016/j.orgel.2009.08.016 ↗
50. Surface segregation at the aluminum interface of poly(3-hexylthiophene)/fullerene solar cells10.1063/1.3294290 ↗
51. Morphology controlled open circuit voltage in polymer solar cells10.1002/pssr.201105213 ↗
52. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
53. Real time Investigation of the interface between a P3HT:PCBM layer and an Al electrode during thermal annealing10.1002/marc.200900224 ↗
54. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
55. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
56. Theoretical investigations of the aluminum polythiophene interface10.1063/1.463340 ↗
57. The importance of post-annealing process in the device performance of poly(3-hexylthiophene): Methanofullerene polymer solar cell10.1016/j.solmat.2006.11.010 ↗
58. Photoelectron-spectroscopy of polyconjugated polymer surfaces and interfaces10.1088/0034-4885/54/9/002 ↗
59. The chemical and electronic-structure of the interface between aluminum and conjugated polymers10.1016/0013-4686(94)80059-6 ↗
60. Methods in determination of morphological degradation of polymer:fullerene solar cells10.1016/j.synthmet.2011.09.014 ↗
61. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
62. Patterns of efficiency and degradation of composite polymer solar cells10.1016/j.solmat.2004.02.028 ↗
63. Interaction of oxygen with conjugated polymers: charge transfer complex formation with poly(3-alkylthiophenes)10.1021/ja964229j ↗
64. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
65. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
66. Charge transport and photocurrent generation in poly (3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
67. Influence of the microstructure on the photooxidative degradation of poly(3-hexylthiophene)10.1016/j.polymdegradstab.2011.12.012 ↗
68. The critical role of processing and morphology in determining degradation rates in polymer solar cells10.1002/aenm.201000030 ↗
69. Some effects of morphology on oxidation and stabilization of polyolefins
70. Localization of oxidation in polypropylene10.1002/masy.19890280111 ↗
71. Allen · 1992
72. Grassie · 1985
73. Aluminum--barium interfaces on some processable poly(p-phenylene vinylene) polymers studied by photoelectron spectroscopy10.1063/1.1394734 ↗
74. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
75. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
76. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
77. Luminescence imaging of polymer solar cells: visualization of progressing degradation10.1063/1.3553864 ↗
78. Light harvesting by planar photonic crystals in solar cells: the case of amorphous silicon10.1088/2040-8978/14/2/024011 ↗
79. On the sensitivity of open-circuit voltage and fill factor on dangling bond density and Fermi level position in amorphous silicon p–i–n solar cell10.1016/j.solmat.2005.08.001 ↗
80. A quantitative study of PCBM diffusion during annealing of P3HT: PCBM blend films10.1021/ma901444u ↗
81. Modeling the temperature induced degradation kinetics of the short circuit current in organic bulk heterojunction solar cells10.1063/1.3391669 ↗
82. Effects of thermal annealing upon the morphology of polymer-fullerene blends10.1002/adfm.201000975 ↗
83. Morphology-dependent trap formation in high performance polymer bulk heterojunction solar cells10.1002/aenm.201100204 ↗
84. Effects of long-term UV–visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend10.1016/j.solmat.2010.03.012 ↗
85. A photochemical study of poly(3-hexylthiophene)10.1021/ma00017a017 ↗
86. Photochain scission of the soluble electronically conducting polymer: poly(3-hexylthiophene)10.1021/ma00008a068 ↗
87. Relationship between the ionization and oxidation potentials of molecular organic semiconductors10.1016/j.orgel.2005.01.002 ↗
88. Dipole induced anomalous S-shape I–V curves in polymer solar cells10.1063/1.3117513 ↗
89. S-shaped current–voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
90. Insights into the stability and thermal degradation of P3HT:C-60 blended films for solar cell applications10.1007/s10853-011-5408-9 ↗
91. Formation of metastable charges as a first step in photoinduced degradation in pi-conjugated polymer: fullerene blends for photovoltaic applications10.1016/j.orgel.2011.06.020 ↗
92. Rabek · 1996
93. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
94. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
95. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
96. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
97. Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells10.1021/nl8014022 ↗
98. Interfacial segregation in polymer/fullerene blend films for photovoltaic devices10.1021/ma100027b ↗
99. Surface-directed spinodal decomposition in poly[3-hexylthiophene] and C-61-butyric acid methyl ester blends10.1021/nn102899g ↗
100. Aging of polymer/fullerene films: temporal development of composition profiles10.1016/j.synthmet.2011.09.013 ↗