journal article·2014-02

Analysis of the degradation mechanism of ITO-free organic solar cells under UV radiation

Subarna Babu Sapkota, Martin Fischer, Birger Zimmermann, Uli Würfel

Publisher page

Abstract

Abstract This work reports on the stability of encapsulated ITO-free bulk heterojunction organic solar cells (BHJ-OSC) under UV radiation in ambient air with the layer sequence Cr/Al/Cr/photoactive layer (PAL)/poly (3, 4-ethylenedioxythiophene) poly (styrenesulfonate) (PEDOT:PSS)/metal-grid. The PAL consisted of poly(3-hexylthiophene) (P3HT) as a donor and (6,6)-phenyl-C60 butyric acid methyl ester (PCBM) as an acceptor. BHJ-OSC with this setup showed remarkable stability under continuous illumination (1000 W/m2) with a low UV content. In contrast, the devices degraded significantly under UV radiation which was characterized by a reduction in fill factor and short-circuit current density. Additional experiments revealed an increase of the sheet resistance of the PEDOT:PSS layer which was interestingly much more pronounced in pure PEDOT:PSS samples as compared to samples where a PAL was deposited underneath. In addition, current extraction by linear increasing voltage (CELIV) measurements indicated a decrease of the effective charge carrier mobility of the PAL. Numerical simulations based on the experimentally determined parameters showed good agreement of the solar cell performance as a function of UV exposure duration. This suggests that the increase of the sheet resistance of the polymeric hole contact and to a lesser extent the change of the effective mobility of the PAL are the main factors governing the deterioration of the photovoltaic performance upon UV exposure. A comparison to devices with a setup ITO/ZnO/PAL/PEDOT:PSS and a full metallization showed clearly improved UV stability, although the absorption of UV in the PAL is very similar. This further supports our interpretation that the degradation of the PAL plays a very minor role. The issue with the degradation of the PEDOT:PSS can easily be solved by incorporating an UV-filter into the device or preferably the use of UV-stabilized PEDOT:PSS formulations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Photovoltaic and photophysical properties of a novel bis-3-hexylthiophene substituted quinoxaline derivative10.1016/j.solmat.2008.04.004 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Solar cell efficiency tables (version 41)10.1002/pip.2352 ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
9. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
10. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
11. Krebs · 2012
12. Influence of processing and intrinsic polymer parameters on photochemical stability of polythiophene thin films10.1016/j.polymdegradstab.2012.07.021 ↗
13. Role of singlet oxygen in photo-oxidative degradation and photo stabilization of polymers10.1002/pen.760150107 ↗
14. Poly(3,4 ethylenedioxythiophene) and its derivatives: past, present and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
15. Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)10.1039/b417803n ↗
16. Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology and work function of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) films10.1002/adfm.200400073 ↗
17. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
18. The spectral sensitivity of PEDOT:PSS films10.1016/j.solmat.2010.12.029 ↗
19. Degradation process in organic thin film devices fabricated using P3HT10.1007/s12043-007-0052-2 ↗
20. Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
21. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
22. Extraction current transients: new method of study of charge transport in microcrystalline silicon10.1103/PhysRevLett.84.4946 ↗
23. Charge transport in π-conjugated polymers from extraction current transients10.1103/PhysRevB.62.R16235 ↗
24. Efficiency enhancement in organic photovoltaic cells:consequences of optimizing series resistance10.1002/adfm.200901107 ↗
25. Rigorous coupled-wave analysis of planar-grating diffraction10.1364/JOSA.71.000811 ↗
26. Highly improved convergence of the coupled-wave method for TM polarization10.1364/JOSAA.13.000779 ↗
27. Computation of the near-field pattern with the coupled-wave method for transverse magnetic polarization10.1080/09500349808230634 ↗
28. Optical near field phenomena in planar and structured organic solar cells10.1117/12.662063 ↗
29. High yield fabrication of vertical interdigital electrodes with sub micrometer distance and their application in an organic photovoltaic device10.1016/j.orgel.2012.11.022 ↗
30. The effect of poly(3-hexylthiophene) molecular weight on charge transport and the performance of polymer:fullerene solar cells10.1002/adfm.200800145 ↗
31. Mobility and fill factor correlation in geminate recombination limited solar cells10.1063/1.3609079 ↗
32. Fill factor in organic solar cells10.1016/j.solmat.2008.06.001 ↗
33. Mechanisms of photodegradation of poly(3-alkylthiophenes) in solution10.1021/ma00063a047 ↗
34. Charge carrier extraction by linearly increasing voltage: analytic framework and ambipolar transients10.1063/1.3516392 ↗
35. The physical meaning of charge extraction by linearly increasing voltage transients from organic solar cells10.1063/1.4818267 ↗
36. Modeling the influence of doping on the performance of bulk heterojunction organic solar cells: one-dimensional effective semiconductor versus two-dimensional donor/acceptor model10.1103/PhysRevB.86.075315 ↗