journal article·2015-10

A futuristic strategy to influence the solar cell performance using fixed and mobile dopants incorporated sulfonated polyaniline based buffer layer

Gopalan Sai-Anand, Anantha-Iyengar Gopalan, Kwang-Pill Lee, Swaminathan Venkatesan, Byoung-Ho Kang, Sang-Won Lee, Jae-Sung Lee, Qiquan Qiao, Dae-Hyuk Kwon, Shin-Won Kang

Publisher page

Abstract

Abstract In this work, we hypothesized and demonstrated a new strategy to tune/modulate the electrochemical, microstructural and opto-electronic properties based on the manipulation of the intentionally included external dopant ion (X − ) within the sulfonated polyaniline (SPANs). Through our new strategy, we developed a different type of SPANs comprising of internal (fixed) and external (mobile) dopant. The X − included SPANs were prepared through a sequential doping, dedoping and redoping processes and designated as SPAN-R (X − ) (where X − is the anion of toluene sulfonic acid (TSA) or camphor sulfonic acid (CSA) or napthalene sulfonic acid (NSA)) by modifying the structure of 4-aminodiphenylamine-2-sulfonic acid with additional polyaniline chains to accommodate X − . SPAN-R(X − ) polymers were characterized by cyclic voltammetry, UV–visible spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Atomic force microscopy to elucidate the influence of X − on the electrical, optoelectronic, microstructural properties and surface properties on the performance characteristics of polymer solar cells (PSCs) fabricated with SPAN-R(X − ) as a buffer layer. The electrochemical band gap, degree of doping (DD), electrical conductivity and degree of crystallinity (CD) were evaluated and correlated to understand the influence of X − on them. The power conversion efficiency (PCE) of PSCs featuring SPAN-R(TSA − ) as a buffer layer showed a ~3.2 times improvement in the overall PCE, compared with the PSCs having pristine SPAN (not containing X − ) as a buffer layer and is higher than that of SPAN-R(CSA − ) and SPAN-R(NSA − ) based devices. The superior photovoltaic (PV) characteristics observed for SPAN-R(TSA − ) is due to the synergistic contributions from appropriate energy-level/work function alignment, higher conductivity, higher DD and induced molecular order with the photoactive layer. Importantly, PSCs with SPAN-R(X − ) buffer layer processed at low temperature (30 °C) (without thermal treatment) exhibited improved PV characteristics and better air-stability as compared to the device having poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) (thermally annealed at 150 °C) as buffer layer. As buffer layers, SPAN-R(X − ) polymers, containing fixed and mobile dopants, are most attractive because of low temperature processability and improved solar cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Bulk heterojunction solar cells: morphology and performance and performance relationships10.1021/cr400353v ↗
2. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%10.1002/adma.201402072 ↗
3. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
4. Critical role of domain crystallinity, domain purity and domain interface sharpness for reduced bimolecular recombination in polymer solar cells10.1016/j.nanoen.2014.12.027 ↗
5. Benzothiadiazole-based polymer for single and double junction solar cells with high open circuit voltage10.1039/c4nr01040j ↗
6. Double junction polymer solar cells10.1039/c4ta00470a ↗
7. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
8. Materials and devices design for efficient double junction polymer solar cells10.1016/j.solmat.2012.04.028 ↗
9. Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-souble polyfluorenes10.1063/1.3522893 ↗
10. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
11. Effect of LiF/Al metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
12. n-Type transition metal oxides as a hole extraction layer in PbS quantum dot solar cells10.1021/nl2015729 ↗
13. An inverted organic solar cell with an ultrathin Ca electron-transporting layer and MoO3 hole-transporting layer10.1063/1.3250176 ↗
14. Organic solar cells featuring nanonowl structures10.1039/c3ee24128a ↗
15. High‐conductivity poly (3, 4‐ethylenedioxythiophene): poly (styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
16. Solution-processed rhenium oxide: a versatile anode buffer layer for high performance polymer solar cells with enhanced light harvest10.1002/aenm.201300884 ↗
17. Enhanced charge transport and photovoltaic performance of PBDTTT-CT/PC70BM solar cells via UV–ozone treatment10.1039/c3nr03355d ↗
18. Solution-processed nickel compound as hole collection layer for efficient polymer solar cells10.1088/0022-3727/47/50/505101 ↗
19. Solution-processed tungsten oxide as an effective anode buffer layer for high-performance polymer solar cells10.1021/jp304878u ↗
20. Enhanced performance of polymer solar cells with PSSA−g−PANI/Graphene oxide composite as hole transport layer10.1016/j.solmat.2014.08.006 ↗
21. Emeraldine base polyaniline as an alternative to poly(3,4-ethylenedioxythiophene) as a hole-transporting layer10.1002/1616-3028(200112)11:6<407::AID-ADFM407>3.0.CO;2-0 ↗
22. Electronic control of ph at sulfonated polyaniline electrodes, journal of the chemical society10.1039/c39920001540 ↗
23. Ultrathin polyaniline-based buffer layer for highly efficient polymer solar cells with wide applicability10.1038/srep06570 ↗
24. Structure characterization of self-acid-doped sulfonic acid ring-substituted polyaniline in its aqueous solutions and as solid film10.1021/ma951783p ↗
25. Soluble and methane sulfonic acid doped poly(diphenylamine)—synthesis and characterization10.1016/S0167-577X(02)00779-6 ↗
26. Eletrosynthesis and properties of self-doped polyaniline10.1016/0379-6779(94)02387-E ↗
27. An in situ spectroelectrochemical investigation of the copolymerization of diaminobenzenesulfonic acid with aniline and its derivatives10.1016/S0013-4686(01)00454-6 ↗
28. Synthesis and characterization of soluble conducting poly(aniline-co-2, 5-dimethoxyaniline)10.1016/S0167-577X(02)01066-2 ↗
29. Spectroscopic and thermal properties of the copolymer of aniline with dithiodianiline10.1016/S0379-6779(01)00337-X ↗
30. Synthesis and applications of sulfonated polyaniline10.1016/S0379-6779(97)80260-3 ↗
31. Sulfonated poly(diphenylamine) as a novel hole-collecting layer in polymer photovoltaic cells10.1039/b807182a ↗
32. An inverted polymer photovoltaic cell with increased air stability obtained by employing novel hole/electron collecting layers10.1039/b815523b ↗
33. “Synthetic metals”: a novel role for organic polymers (Nobel lecture)10.1002/1521-3773(20010716)40:14<2581::AID-ANIE2581>3.0.CO;2-2 ↗
34. Camphorsulfonic acid fully doped polyaniline emeraldine salt: conformations in different solvents studied by an ultraviolet/visible/near-infrared spectroscopic method10.1021/cm00051a002 ↗
35. Conformation of polyaniline: effect of mechanical shaking and spin casting10.1016/S0379-6779(97)80680-7 ↗
36. Photoluminescence and photo-redox reactions of poly(2-methoxyaniline-5-sulfonic acid)10.1016/j.cap.2003.11.057 ↗
37. Electronic conduction in polymers, carbon nanotubes and graphene10.1039/c0cs00103a ↗
38. An electrochemical glucose biosensor exploiting a polyaniline grafted multiwalled carbon nanotube/perfluorosulfonate ionomer–silica nanocomposite10.1016/j.biomaterials.2009.07.047 ↗
39. Synthesis of poly(diphenylamine) nanotubes in the channels of MCM-41 through self-assembly10.1021/ma048703e ↗
40. Poly(pyrrol-2-ylium tosylate), electrochemical synthesis and physical and mechanical properties10.1021/ma00154a005 ↗
41. Mechanical properties of electrochemically prepared polypyrrole films10.1147/rd.274.0342 ↗
42. A commentary on “A new series of conducting polymers with layered structure: polypyrrole n-alkylsulfates and n-alkylsulfonates” by W. Wernet, M. Monkenbusch, G. Wegner (Macromolecular chemical rapid communications, 1984, 5, 157–164)10.1002/marc.200500091 ↗
43. Enhancement of electrical conductivity of polypyrrole film by stretching: counter ion effect10.1016/0379-6779(88)90238-X ↗
44. Self-doped polyanilines10.1016/j.jpowsour.2003.08.008 ↗
45. Effect of sulfonic acid group on polyaniline backbone10.1021/ja00007a046 ↗
46. Counter-ion induced processibility of conducting polyaniline and of conducting polyblends of polyaniline in bulk polymers10.1016/0379-6779(92)90053-L ↗
47. Mild wetting poor solvent induced hydrogen bonding interactions for improved performance in bulk heterojunction solar cells10.1039/C3TA13875E ↗
48. Preheated solvent exposure on P3HT:PCBM thin film: a facile strategy to enhance performance in bulk heterojunction photovoltaic cells10.1016/j.cap.2014.08.010 ↗
49. Polymer solar cells processed using anisole as a relatively nontoxic solvent10.1002/ente.201300174 ↗
50. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
51. Fabrication of gold nanoflower anchored conducting polymer hybrid film electrode by pulse potentiostatic deposition10.1109/LED.2013.2266669 ↗
52. Development of a novel cyano group containing electrochemically deposited polymer film for ultrasensitive simultaneous detection of trace level cadmium and lead10.1016/j.jhazmat.2012.07.069 ↗
53. Effects of different dopants on the band gap and electrical conductivity of the poly(phenylene-thiazolo[5,4-d]thiazole) copolymer10.1039/c4ra02425g ↗
54. New low band gap alternating polyfluorene copolymer-based photovoltaic cells10.1016/j.solmat.2007.02.018 ↗
55. Electrochemical and spectroelectrochemical studies on copolymerization of diphenylamine with 2, 5-diaminobenzenesulfonic acid10.1149/1.1491984 ↗
56. Photoelectron spectroscopy of thin films of PEDOT–PSS conjugated polymer blend: a mini-review and some new results10.1016/S0368-2048(01)00323-1 ↗
57. Synthesis and characterization of water-soluble and conducting sulfonated polyaniline/para-phenylenediamine-functionalized multi-walled carbon nanotubes nano-composite10.1016/j.mseb.2008.07.003 ↗
58. Highly conductive and thermally stable self-doping propylthiosulfonated polyanilines10.1021/ma030337w ↗
59. The inductive behavior derived from hydrolysis of polyaniline10.1016/S0013-4686(02)00438-3 ↗
60. Tuning the optical sensing of pH by poly(diphenylamine)10.1016/j.snb.2003.07.009 ↗
61. Electrochemical oxidation of poly (3, 4-ethylenedioxythiophene) – “in situ” conductivity and spectroscopic investigations10.1016/S0379-6779(99)00271-4 ↗
62. Nanoscale morphology, dimensional control, and electrical properties of oligoanilines10.1021/ja1014184 ↗
63. Investigations on the electrical and structural properties of polyaniline doped with camphor sulphonic acid10.1016/j.jpcs.2006.01.100 ↗
64. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
65. Control of the electrode work function and active layer morphology via surface modification of indium tin oxide for high efficiency organic photovoltaics10.1063/1.2778548 ↗
66. The importance of post-annealing process in the device performance of poly (3-hexylthiophene): methanofullerene polymer solar cell10.1016/j.solmat.2006.11.010 ↗
67. Two different fullerenes have the same cyclic voltammetry10.1021/ja00003a053 ↗
68. Dopant dimension influence on polyaniline film structure10.1007/s003390050919 ↗
69. Role of ring torsion angle in polyaniline: electronic structure and defect states10.1103/PhysRevB.41.10674 ↗
70. Massive polarons in large-energy-gap polymers10.1103/PhysRevB.39.10174 ↗
71. P3HT/PCBM bulk heterojunction solar cells: relation between morphology and electro-optical characteristics10.1016/j.solmat.2006.02.010 ↗
72. Scientific importance, properties and growing applications of poly (3,4-ethylenedioxythiophene)10.1039/b417803n ↗
73. Microscopic understanding of the anisotropic conductivity of PEDOT:PSS thin films10.1002/adma.200602575 ↗
74. Intrinsic surface dipoles control the energy levels of conjugated polymers10.1002/adfm.200901025 ↗
75. The consequences of interface mixing on organic photovoltaic device characteristics10.1002/adfm.201002014 ↗
76. Control of the nanoscale crystallinity and phase separation in polymer solar cells10.1063/1.2891884 ↗
77. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗