Damp heat resilient thermoplastic polyolefin encapsulant for photovoltaic module encapsulation
Source abstract
Abstract
Abstract Thermoplastic polyolefin (TPO) is a non-crosslinking material used in photovoltaic module encapsulation. TPO thermal degradation and its weather stabilities are still not known. In this work, TPO laminates were prepared and subjected to extended damp-heat weather test. TPO encapsulant properties were studied and compared with the most commonly used encapsulant, Ethylene-Vinyl Acetate (EVA). Four times lower rate of transmittance loss and increment rate in the yellowness index values have been found for TPO compared to EVA laminate. Damp-heat induced degradation mechanism, and its components were studied using Raman and Fourier-transform-infrared (FTIR) spectroscopy. Raman spectra revealed that the carbonyl group loss rate at the edge is one order of magnitude higher than the center. FTIR has shown a higher rate of acetic acid and hydroxyl group formation in EVA as compared to the TPO. FTIR also demonstrated that TPO has a lower water absorption because of its nonpolar nature, whereas EVA shows more water absorption due to its polar nature. The rate of change in thermal properties of TPO and EVA encapsulants were studied through the heat-cool-heat cycle. A higher rate of increment in the degree of crystallinity is found for EVA as compared to the TPO encapsulant during the extended damp-heat acceleration test. This study helps to understand the TPO and EVA encapsulants degradation behavior, degradation components, and mechanism to the encapsulant researchers and PV module manufacturers when a PV module experiences the hot-humid conditions. This TPO may result in the industry adopting the different PV modules for fabricating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Advanced Battery Technologies Research · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
2. A multidimensional optimization approach to improve module efficiency, power and costs
3. Aspects of the thermal oxidation, yellowing and stabilisation of ethylene vinyl acetate copolymer10.1016/S0141-3910(00)00111-7 ↗
4. Relation between degradation of polymeric components in crystalline silicon PV module and climatic conditions: a literature review10.1016/j.solmat.2018.12.027 ↗
5. Overview of scientific issues involved in selection of polymers for PV applications
6. K.R. Mclntosh, J.N. Cotsell, J.S. Cumpston, A.W. Norris, N.E. Powell, B.M. Ketola, AN optical comparison OF silicone and EVA encapsulants for conventional silicon PV MODULES : a RAY-TRACING study, 34th IEEE Photovolt. Spec. Conf. (n.d.) 544–549.
7. Performance and life prediction model for photovoltaic modules: effect of encapsulant constitutive behavior10.1016/j.solmat.2013.11.016 ↗
8. Impact of moisture on PV module encapsulants
9. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
10. Factors that affect the EVA encapsulant discoloration rate upon accelerated exposure10.1016/0927-0248(95)00128-X ↗
11. Köntges · 2017
12. Effect OF curing temperature ON properties OF ethylene vinyl acetate used for crystalline silicon solar module encapsulation
13. Encapsulation of printable mesoscopic perovskite solar cells enables high temperature and long-term outdoor stability10.1002/adfm.201809129 ↗
14. Investigation of newly developed thermoplastic polyolefin encapsulant principle properties for the c-Si PV module application10.1016/j.matchemphys.2020.122660 ↗
15. Newly developed thermoplastic polyolefin encapsulant–A potential candidate for crystalline silicon photovoltaic modules encapsulation10.1016/j.solener.2019.11.018 ↗
16. Three‐dimensional multi‐ribbon interconnection for back‐contact solar cells10.1002/pip.3390 ↗
17. Manju Santhakumari · 2019 · 83
18. Polyolefin as PID-resistant encapsulant material in PV modules10.1016/j.solmat.2015.10.009 ↗
19. Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules
20. Field testing of thermoplastic encapsulants in high-temperature installations10.1002/ese3.104 ↗
21. Degradation of interfacial adhesion strength within photovoltaic mini-modules during damp-heat exposure10.1002/pip.2460 ↗
22. Non-destructive degradation analysis of encapsulants in PV modules by Raman Spectroscopy10.1016/j.solmat.2011.01.030 ↗
23. Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules10.1002/pip.3323 ↗
24. Performance of PV modules using co-extruded backsheets based on polypropylene10.1016/j.solmat.2021.110976 ↗
25. Evaluation of damp-heat testing of photovoltaic modules10.1002/pip.2842 ↗
26. Influence of typical stabilizers on the aging behavior of EVA foils for photovoltaic applications during artificial UV-weathering10.1016/j.polymertesting.2015.03.022 ↗
27. Monitoring crosslinking inhomogeneities in ethylene vinyl acetate photovoltaic encapsulants using Raman microscopy10.1039/C5RA18988H ↗
28. Early-stage identification of encapsulants photobleaching and discoloration in crystalline silicon photovoltaic module laminates10.1002/pip.3269 ↗
29. TG/FTIR study of the thermal pyrolysis of EVA copolymers10.1016/j.jaap.2004.09.009 ↗
30. Climate specific accelerated ageing tests and evaluation of ageing induced electrical , physical , and chemical changes
31. Evaluating and predicting molecular mechanisms of adhesive degradation during field and accelerated aging of photovoltaic modules10.1002/pip.3045 ↗
32. Photodegradation of methacrylate/acrylate copolymers10.1351/pac197334020247 ↗
33. Characterization of ethylene vinyl acetate (EVA) encapsulant: effects of thermal processing and weathering degradation on its discoloration10.1016/0927-0248(92)90013-F ↗
34. Encapsulant adhesion to surface metallization on photovoltaic cells10.1109/JPHOTOV.2017.2746572 ↗
35. Measurement of moisture content in photovoltaic panel encapsulants using spectroscopic optical coherence tomography: a feasibility study
36. Determining the degree of crosslinking of ethylene vinyl acetate photovoltaic module encapsulants - a comparative study10.1016/j.solmat.2013.04.022 ↗
37. Determination of thermal properties of crosslinked EVA encapsulant material in outdoor exposure by TSC and DSC methods10.1016/j.renene.2013.10.013 ↗
38. Measurement of glass transition temperature of crosslinked EVA encapsulant by thermal analysis for photovoltaic application10.1016/j.renene.2011.11.015 ↗
39. Research on hot spot risk for high-efficiency solar module10.1016/j.egypro.2017.09.399 ↗