Thermomechanical residual stress evaluation in multi-crystalline silicon solar cells of photovoltaic modules with different encapsulation polymers using synchrotron X-ray microdiffraction
Source abstract
Abstract
Abstract Photovoltaic (PV) module reliability issues, due to silicon cell cracking, are gaining more and more attention due to increasing demand for solar power and reduction of cell thickness to reduce cost. Recent reports show significant effect of encapsulation polymer material on cell cracks leading to the idea of tailoring encapsulation materials for more reliable PV modules. This paper investigates the effect of encapsulation modulus on the cell residual stress using Synchrotron scanning X-ray microdiffraction (µSXRD), which has been proven to be an effective technique to probe the stress in silicon solar cells, especially once they are encapsulated. The post lamination residual stress in the encapsulated multi-crystalline silicon (mc-Si) solar cells was reported for the first time using µSXRD in this manuscript and provide quantitative evaluation of the effect of encapsulation modulus on the cell residual stress. Further, simple approximate finite element (FE) model was also developed to evaluate the effect of the encapsulation polymer on the cell stress. The FE simulations predict the trend of the stress variation with encapsulation polymer modulus very well. Dynamic mechanical analysis and rheological testing of the encapsulation polymers was also performed to correlate the polymer behaviour with the experimental and simulated stresses. Both experimental and simulation results show a similar trend of significant cell stress variation with encapsulation polymer modulus. In the case of external loading, the temperature of load application is observed to be very significant as it dictates the elastic state of the encapsulant, leading to critical conclusion that the encapsulant needs to be selected based on elastic behaviour over the temperature history of the encapsulant during module fabrication and operation. The results and discussion presented are expected to be very useful for development of more reliable PV modules.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Silicon Carbide Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. M. Sander, S. Dietrich, M. Pander, S. Schweizer, M. Ebert, J. Bagdahn, Investigations on crack development and crack growth in embedded solar cells, in: Proceedings SPIE 8112, Reliability of Photovoltaic Cells, Modules, Components, and Systems IV, 2011, 811209. 〈https://doi.org/10.1117/12.893662〉.10.1117/12.893662 ↗
2. M. Köntges, S. Kajari-Schröder, I. Kunze, U. Jahn, Crack statistic of crystalline silicon photovoltaic modules, in: Proceedings of 26th EUPVSEC, Hamburg, Germany, September, 2011.
3. M. Gabor, et al., Soldering induced damage to thin Si solar cells and detection of cracked cells in modules, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 2006.
4. J. Wendt, M. Träger, M. Mette, A. Pfennig, B. Jaeckel, The link between mechanical stress induced by soldering and micro damages in silicon solar cells, in: Proceedings of 24th EUPVSEC, 2009, pp. 3420–3423.
5. R. Mickiewicz, et al., Effect of encapsulation modulus on the response of PV modules to mechanical stress, in: Proceedings of 26th EUPVSEC, Hamburg, Germany, September 2011.
6. S. Dietrich, M. Pander, M. Sander, S.H. Schulze, M. Ebert, Mechanical and thermomechanical assessment of encapsulated solar cells by finite-element-simulation, in: Proceedings SPIE 7773, Reliability of Photovoltaic Cells, Modules, Components, and Systems III, 77730F, 18 August 2010. 〈https://doi.org/10.1117/12.860661〉.10.1117/12.860661 ↗
7. Sascha Dietrich, Martin Sander, Matthias Pander, Matthias Ebert, “Interdependency of mechanical failure rate of encapsulated solar cells and module design parameters, in: Proceedings SPIE 8472, Reliability of Photovoltaic Cells, Modules, Components, and Systems IV, Vol. 8472, 84720P SPIE, 2012. 〈10.1117/12.929289〉.10.1117/12.929289 ↗
8. Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules10.1038/srep04506 ↗
9. Effects of the curing process on the residual stress in solar cell module
10. Probing stress and fracture mechanism in encapsulated thin silicon solar cells by synchrotron X-ray microdiffraction10.1016/j.solmat.2016.12.028 ↗
11. From cells to laminate: probing and modelling residual stress evolution in thin silicon photovoltaic modules using synchrotron X-ray micro-diffraction experiments and finite element simulations10.1002/pip.2891 ↗
12. Cullity · 1978
13. Fultz · 2007
14. A dedicated superbend X-ray microdiffraction beamline for materials, geo-, and environmental sciences at the advanced light source10.1063/1.3096295 ↗
15. A superbend X-ray microdiffraction beamline at the advanced light source10.1016/j.msea.2009.03.062 ↗
16. Budiman · 2015
17. High spatial resolution stress measurements using synchrotron based scanning X-ray microdiffraction with white or monochromatic beam10.1016/j.msea.2005.02.033 ↗
18. Impact of deposition temperature on the crystallizations kinetics of amorphous GeTe films10.1007/s10853-015-9493-z ↗
19. Plasticity evolution in nanoscale Cu/Nb single crystal multilayers as revealed by synchrotron X-Ray microdiffraction10.1016/j.msea.2015.03.067 ↗
20. Plasticity of indium nanostructures as revealed by synchrotron X-Ray microdiffraction10.1016/j.msea.2012.01.017 ↗
21. Plasticity in the nanoscale Cu/Nb single crystal multilayers as revealed by synchrotron laue X-Ray microdiffraction10.1557/jmr.2011.421 ↗
22. Measurements of stresses in Cu and Si around through-silicon via by synchrotron X-Ray microdiffraction for 3-dimensional integrated circuits10.1016/j.microrel.2011.10.016 ↗
23. Tamura · 2014
24. E. Gullikson, Center for X-ray Optics, X-Ray Interactions With Matter. 〈http://henke.lbl.gov/optical_constants/atten2.html〉 (Last accessed, March 2017).
25. Enabling thin silicon technologies for next generation c- Si solar PV renewable energy systems using synchrotron X-ray microdiffraction as stress and crack mechanism probe10.1016/j.solmat.2014.07.029 ↗
26. Synchrotron X-ray micro-diffraction – probing stress state in encapsulated thin silicon solar cells10.1016/j.proeng.2015.09.241 ↗
27. TA Q800 DMA Analyzer, TAInstruments, 159 Lukens Drive, New Castle, DE 19720, USA, Weblink: 〈http://www.tainstruments.com.cn/q800/〉 (Last accessed 19 November 2018).
28. TA Discovery Hybrid Rheometer (DHR-2), TAInstruments, 159 Lukens Drive, New Castle, DE 19720, USA, Weblink: 〈http://www.tainstruments.com.cn/dhr-2/〉 (Last accessed 19 November 2018).
29. ABAQUS Documentation, Version 6.14, SIMULIA, Dassault Systèmes Simulia Corp, 2015.
30. S.K. Tippabhotla, I. Radchenko, W. Song, N. Tamura, A.A.O. Tay, A.S. Budiman, Effect of interconnect plasticity on soldering induced residual stress in thin crystalline silicon solar cells, in: Proceedings of the 18th Electronics Packaging Technology Conference (EPTC), IEEE, Singapore, 2016, pp. 734–737. 〈https://doi.org/10.1109/EPTC.2016.7861579〉.10.1109/EPTC.2016.7861579 ↗
31. MichaelW. Rowell, ShandorG. Daroczi, DuncanW.J. Harwood, AndrewM. Gabor, The Effect of laminate construction and temperature cycling on the fracture strength and performance of encapsulated solar cells, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion (WCPEC-4), June 15, Waikoloa Village, Hawaii USA, 2018.
32. Accuracy of stress measurement by Laue microdiffraction (Laue-DIC method): the influence of image noise, calibration errors and spot number10.1107/S1600577517006622 ↗
33. MIT inverse Compton source concept10.1016/j.nima.2009.05.042 ↗
34. Intense superradiant x rays from a compact source using a nanocathode array and emittance exchange10.1103/PhysRevLett.108.263904 ↗
35. MIRRORCLE type tabletop synchrotron light source realizing micron‐order focus point10.1002/xrs.2402 ↗
36. Tabletop synchrotron light source
37. From synchrotron radiation to lab source: advanced speckle-based X-ray imaging using abrasive paper10.1038/srep20476 ↗