Simple and versatile UV-ozone oxide for silicon solar cell applications
Source abstract
Abstract
Abstract Semiconductor surface clean is sometimes perceived as costly but long recognized as pivotal in determining the final semiconductor device performance and yield. In this contribution, we investigated the effectiveness of crystalline silicon surface cleaning by a simple UV-ozone process in comparison to the industry standard RCA clean for silicon photovoltaic applications. We present a unique method of processing the silicon surface effectively by UV-ozone cleaning. Despite being simple, UV-ozone cleaning results in a superior surface passivation quality that is comparable to high-quality RCA clean. When used as a stack dielectric—UV-ozone oxide overlaid by aluminum oxide—the thickness of UV-ozone oxide plays an important role in determining the passivation quality. Of all treatment times, 15 min of UV-ozone treatment results in an outstanding passivation quality, achieving the effective carrier lifetime of 3 ms and saturation current density of 5 fA/cm2. In addition, we present a simple and effective technique to extract values of electron/hole capture cross-section for the purpose of analyzing the interface passivation quality from already measured surface recombination parameters of saturation current density, interfacial trap density and total fixed charge, instead of measuring on the separately prepared metal-insulated-semiconductor (MIS) samples by the techniques: frequency-dependent parallel conductance or deep-level transient spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
2. Glow discharge phenomena in plasma etching and plasma deposition10.1149/1.2129029 ↗
3. Preparation of surfaces for high quality interface formation10.1116/1.572725 ↗
4. Application of choline in semiconductor technology
5. H. Muraoka, K. Kurosawa, H. Hiratsuka, and T. Usami, Cleaning Solutions Based on Choline, presented at the The Electrochemical Society Extended Abstract, Denver, 1981.
6. Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology
7. S.h. Chen, S.l. Chen, L.y. Chung, W.k. Yeh, The New Concept For Particle Remove In Wet Bench Cleaning, in: Proceedings of the 13th International Symposium on the Physical and Failure Analysis of Integrated Circuits, 2006, pp. 137–140.10.1109/IPFA.2006.251015 ↗
8. The IMEC clean: a new concept for particle and metal removal on Si surfaces
9. Efficiency Enhancement of InP nanowire solar cells by surface cleaning10.1021/nl4016182 ↗
10. Siemens · Poggendorff's Annal. Phys. Chem. · 1857 · 102 · 6610.1002/andp.18571780905 ↗
11. Dielectric-barrier discharges: their history, discharge Physics, and industrial applications10.1023/A:1022470901385 ↗
12. From ozone generators to flat television screens: history and future potential of dielectric-barrier discharges10.1351/pac199971101819 ↗
13. G. Chen, The applications of DI-O3 water on wafer surface preparation, in: Proceedings of the International Conference on Wafer Rinsing, Water Reclamation and Environmental Technology for Semiconductor Manufacturing, Industrial Technology Research Institute, Hsinchu, Taiwan, 1999.
14. Influence of surface preparation and cleaning on the passivation of boron diffused silicon surfaces for high efficiency photovoltaics10.1016/j.tsf.2017.06.043 ↗
15. H. Ali, A. Moldovan, S. Mack, W.V. Schoenfeld, K.O. Davis, Transmission electron microscopy based interface analysis of the origin of the variation in surface recombination of silicon for different surface preparation methods and passivation materials, Phys. Status Solidi (a), pp. 1700286-n/a, Art. no. 1700286.
16. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
17. S. Bakhshi, N. Zin, K. Davis, M. Wilson, I. Kashkoush, W. Schoenfeld, Improving silicon surface passivation with a silicon oxide layer grown via ozonated deionized water, in: Proceedings of the 44th IEEE Photovoltaic Specialists Conference, Washington DC, 2017.10.1109/PVSC.2017.8366153 ↗
18. Ultraviolet depolymerization of photoresist polymers10.1002/pen.760120206 ↗
19. Surface cleaning by ultraviolet radiation10.1116/1.1318658 ↗
20. UV/ozone cleaning of Surfaces10.1109/TPHP.1976.1135156 ↗
21. Ultra thin oxide formation using chemical oxide passivation
22. Preoxidation UV treatment of silicon wafers10.1149/1.2100818 ↗
23. A study of UV/Ozone cleaning procedure for silicon surfaces10.1002/pssa.2211150124 ↗
24. Simple cleaning and conditioning of silicon surfaces with UV/ozone sources10.1016/j.egypro.2014.08.067 ↗
25. High-efficiency inverted bulk heterojunction polymer solar cells with UV ozone-treated ultrathin aluminum interlayer10.1063/1.3479916 ↗
26. High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells10.1038/nphoton.2011.317 ↗
27. Enhancing the performance of P3HT: icba based polymer solar cells using LiF as electron collecting buffer layer and UV–ozone treated MoO3 as hole collecting buffer layer10.1016/j.solmat.2012.12.006 ↗
28. Effect of UV-ozone exposure on PCBM10.1109/JPHOTOV.2012.2183579 ↗
29. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
30. K.R. McIntosh, R.A. Sinton, Uncertainty in photoconductance lifetime measurements that use an inductive-coil detector, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2008.
31. Uncertainty in photoconductance measurements of the emitter saturation current10.1109/JPHOTOV.2013.2270346 ↗
32. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
33. Variation of the layer thickness to study the electrical property of PECVD Al2O3 / c-Si interface10.1016/j.egypro.2011.06.195 ↗
34. Transmission electron microscopy based interface analysis of the origin of the variation in surface recombination of silicon for different surface preparation methods and passivation materials
35. Monitoring metal contamination of silicon by multiwavelength room temperature photoluminescence spectroscopy10.1063/1.4769746 ↗
36. Iron contamination in silicon technology10.1007/s003390051074 ↗
37. Characteristics of spontaneous reaction occurred by metal contamination and silicon substrate for ultralarge-scale integration semiconductor process10.1149/1.2953520 ↗
38. Present status and recent advancements in corona-voltage non-contact electrical metrology of dielectrics for IC-manufacturing10.1149/MA2006-02/22/1084 ↗
39. COCOS (corona oxide characterization of semiconductor) non-contact metrology for gate dielectrics10.1063/1.1354401 ↗
40. Dielectric surface passivation for silicon solar cells: a review10.1002/pssa.201700293 ↗
41. On effective surface recombination parameters10.1063/1.4886595 ↗
42. H.H.W. Reviewer, MOS (Metal Oxide Semiconductors) Physics and Technology, E.H. Nicollian, J.R. Brews,J. Vac. Sci. Technol., vol. 21, no. 4, 1982, pp. 1048–1049.10.1116/1.571867 ↗
43. Improvements in the determination of interface state density using deep level transient spectroscopy10.1063/1.334179 ↗
44. Modeling recombination at the Si-Al2O3 interface10.1109/JPHOTOV.2013.2247464 ↗
45. Electrical characteristics of the SiO2·Si interface near midgap and in weak inversion10.1016/0038-1101(74)90086-0 ↗
46. Impact of illumination level and oxide parameters on Shockley–Read–Hall recombination at the Si‐SiO2 interface10.1063/1.350782 ↗
47. Interface recombination parameters of atomic-layer-deposited Al2O3 on crystalline silicon10.1063/1.3700241 ↗
48. On the c-Si/SiO2 interface recombination parameters from photo-conductance decay measurements10.1063/1.4979722 ↗