journal article·2003-10

Characterisation of EVA encapsulant material by thermally stimulated current technique

K. Agroui, G. Collins

Publisher page

Abstract

Abstract The purpose of this investigation is to better define the thermal behaviour of EVA-based encapsulant during photovoltaic module encapsulation process and also in field exposure in desert climate using the thermally stimulated current (TSC) technique. TSC experiments were conducted on EVA in the temperature range from −150°C to 70°C, the measurements were carried out on uncured and cured specimens of EVA and on EVA samples especially prepared using the laminator equipment. When performing the measurements with the TSC instrument it was noted that the EVA exhibits two peaks assigned to dipole relaxation processes. The peak maximum current and the area under the TSC current peak were used for the determination of the glass transition temperature, activation energy and relaxation frequency. For original EVA, we found that glass transition temperature at constant polarisation voltage and under different polarisation temperatures remain unchanged and is located around −38°C. Also, the activation energy has been determined using initial rise method to be about 0.32 eV. At gel content of 70%, the cured EVA shows a reduced integrated area under the depolarisation peak, especially for the high temperature. The combined change in TSC peak parameters of EVA encapsulant is correlated with the degree of curing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Roughness and Optical Measurements · High voltage insulation and dielectric phenomena · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Encapsulant material requirements for photovoltaic modules
2. Characterisation of ethylene vinyl acetate (EVA) encapsulant effects on thermal processing and weatherability degradation on its discoloration10.1016/0927-0248(92)90013-F ↗
3. K. Agroui, Y. Mesbahi, F. Moussa, Study of electrical properties of EVA during PV module encapsulation process, Proceedings of the Second World Conference and Exhibition on Photovoltaic Solar Energy Conversion, Vienna, Austria, 6–10 July 1998.
4. K. Agroui, N. Benrekaa, Characterisation of EVA for photovoltaic application, Proceedings of the 11th International Conference on Microelectronic (ICM’99), Kuwait City, 22–24 November 1999, IEEE Catalogue Number 99EX388, pp. 271–274.10.1109/ICM.2000.884856 ↗
5. Comparing thermal stimulated current (TSC) with other thermal analytical methods to characterize the amorphous phase of polymers a10.1016/0040-6031(91)87166-T ↗
6. K. Agroui, Y. Segui, J. Farenc, N. Benrekaa, Characterisation of EVA encapsulant by glass transition temperature method for photovoltaic application, International Conference on Energy (IEC 2000), University of El-Ain, UAE, 7–9 May 2000.
7. E.R. Neagu, et al., Analysis of the thermally stimulated discharge current around glass–rubber transition temperature in PET, J. Appl. Phys. 82(5) (1997) 2488–2496.10.1063/1.366061 ↗
8. G. Collins, EVA Test Report, 17 January, Thermold Partners, LP, Instrumentation Division at Stamford, Connecticut, USA, 2001.
9. L. Zong-Fu, R.E. Callahan, C. Hanson, J.M. Howard III, In situ cure characterisation of coatings by thermally stimulated current (TSC): spectroscopy and relaxation map analysis (RMA), TSC Application note, 1995. Thermold Partners, LP, Instrumentation Division at Stamford, Connecticut, USA.
10. J.J. lieari, L.A. Hughes, Functions of Coating in Handbook of Polymer Coatings for Electronics Chemistry, Technology and Applications, Noyes Publications, 1990, pp. 103–149 (Chapter 4).
11. R.H. Liang, S. Chung, A. Clayton, S.D.I. Stefeno, K. Oda, S.D. Hong, A. Gupta, Photochemical degradation of ethylene acetate copolymer, Polymer Science and Technology, Plenum, 1983, 20, Polymer Alloys 3: Blends, Blocks, Grafts, Interpenetrating Networks, pp. 267–278.10.1007/978-1-4684-4358-5_17 ↗