Investigation of Cu(In,Ga)Se 2 absorber by time-resolved photoluminescence for improvement of its photovoltaic performance
Source abstract
Abstract
Abstract Time-resolved photoluminescence (TRPL) measurement has been performed on Cu(In,Ga)Se 2 (CIGS) absorbers. In this contribution, CIGS films on both rigid soda-lime glass and flexible stainless steel (SUS) substrates are fabricated by the so-called “multi-layer precursor method” consisting of Ga–Se/In–Se/Cu–Se stacks. The TRPL lifetime, demonstrating a positive relationship with PL intensity, exhibits a close correlation with all photovoltaic parameters. According to TRPL and sensitive capacitance measurements, the average band-gap energy ( E g ) should be in a range of 1.25–1.30 eV, giving rise to sufficiently long TRPL lifetimes. Ultimately, CIGS absorber is fabricated with double graded E g profile with a proper average E g of 1.27 eV and back-surface field of 0.22 V/μm, defined as a ratio of the change in E g divided by the change in a depth range from 1 to 2 μm from CIGS surface. This graded E g profile results in the improvement of the efficiency of the CIGS solar cell on a flexible SUS substrate up to 16.22% without an anti-reflective layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Background and motivation for thin-film solar-cell development
2. Epitaxial thin film crystalline silicon solar cells on low cost silicon carriers
3. 19.9%-Efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
4. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
5. J. Kessler, M. Bodegard, J. Hedstrom, L. Stolt, New world record Cu(In,Ga)Se2 based mini-module: 16.6%, in: Proceedings of the 16th EU-PVSEC, 2000, pp. 2057–2060.
6. World-record Cu(In,Ga)Se2-based thin-film sub-module with 17.4% efficiency10.1002/pip.2246 ↗
7. Progress toward 20% efficiency in Cu(In,Ga)Se2 polycrystalline thin-film solar cells10.1002/(SICI)1099-159X(199907/08)7:4<311::AID-PIP274>3.0.CO;2-G ↗
8. Diode characteristics in state-of-the-art ZnO/CdS/Cu(In1−xGax)Se2 solar cells10.1002/pip.626 ↗
9. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
10. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
11. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
12. Wide gap chalcopyrites: material properties and solar cells10.1016/S0040-6090(01)01525-5 ↗
13. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
14. Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells-recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
15. Effect of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique10.1016/j.cap.2009.11.082 ↗
16. Promises of Cu (In, Ga)Se2 thin film solar cells from the perspective of material properties, fabrication methods and current research challenges10.3923/jas.2011.401.410 ↗
17. Determination of open-circuit voltage in Cu(In,Ga)Se2 solar cell by averaged Ga/(In+Ga) near its absorber surface10.1063/1.4819087 ↗
18. Relationship between open-circuit voltage in Cu(In,Ga)Se2 solar cell and peak position of (220/204) preferred orientation near its absorber surface10.1063/1.4832995 ↗
19. Effect of Ga content on defect states in CuIn1−xGaxSe2 photovoltaic devices10.1063/1.1485301 ↗
20. Time-resolved photoluminescence in Cu(In,Ga)Se2 thin films and solar cells10.1016/j.tsf.2006.12.040 ↗
21. Characterization of Cu(In,Ga)Se2 solar cell fabrication process by photoluminescence10.1143/JJAP.51.10NC13 ↗
22. J. Chantana, M. Murata, T. Higuchi, T. Watanabe, K. Kawamura, T. Minemoto, Influence of averaged Ga/III in Cu(In,Ga)Se2 fabricated by multi-layer precursor method upon cell efficiency, in: Proceedings of the 28th EU-PVSEC, 2013, pp. 2292–2295.10.1016/j.tsf.2014.01.009 ↗
23. Na impurity chemistry in photovoltaic CIGS thin films: Investigation with x-ray photoelectron spectroscopy10.1116/1.580902 ↗
24. Effect of NaF coevaporation on structural properties of Cu(In,Ga)Se2 thin films10.1016/S0040-6090(03)00246-3 ↗
25. Effect of Cu deficiency on the optical bowing of chalcopyrite Cu In1−xGaxSe210.1063/1.2089154 ↗
26. Annealing effects on Zn1−xMgxO/CIGS interface characterized by ultraviolet light excited time-resolved photoluminescence10.1016/j.solmat.2008.03.014 ↗
27. Analysis of transient photocurrents in Cu(In,Ga)Se2 thin film solar cells10.1063/1.365675 ↗
28. Time-resoled microphotoluminescence study of Cu(In,Ga)Se210.1143/JJAP.50.05FC01 ↗
29. Deep-level transient spectroscopy: a new method to characterize traps in semiconductors10.1063/1.1663719 ↗
30. Effect of residual copper selenide on CuInGaSe2 solar cells10.1016/j.sse.2010.11.019 ↗
31. Surface characterization of chemically treated Cu(In, Ga)Se2 thin films10.1143/JJAP.35.4760 ↗
32. Influence of KCN treatment on CuInS2 thin films10.1016/0169-4332(95)00236-7 ↗
33. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic application10.1103/PhysRevB.84.165324 ↗
34. Inpact of Ga/(In+Ga) profile in Cu(In,Ga)Se2 prepared by multi-layer precursor method on its cell performance10.1016/j.tsf.2014.01.009 ↗