Chalcogenisation of Cu–Sb metallic precursors into Cu3Sb(SexS1−x)3
Source abstract
Abstract
Cu3SbS3 is a novel chalcogenide semiconductor with p-type conductivity and an energy bandgap of 1.84 eV. By incorporating selenium into this material to form Cu3Sb(SexS1−x)3 where x=Se/(Se+S), the energy bandgap can be altered to be in the range 1.38–1.84 eV for 0<x<0.49. The energy bandgap can hence be adjusted to be near the optimum for making the absorber layer for use in single and multi-junction photovoltaic solar cell devices. In this paper these materials were prepared using a two-stage process that involved magnetron sputtering of the Cu–Sb precursor layers followed by conversion to Cu3SbS3 by annealing in the presence of elemental sulphur and to Cu3Sb(SxSe1−x)3 by annealing in the presence of a mixture of sulphur and selenium. The films synthesised were characterised using scanning electron microscopy, energy dispersive x-ray analysis, x-ray diffraction, secondary ion mass spectroscopy and photo-electrochemical measurements. When the Cu3SbS3 was formed on glass substrates it had a cubic crystal structure whereas when it was formed on Mo-coated glass it had the monoclinic crystal structure. Likewise the layers of Cu3Sb(S,Se)3 formed on Mo-coated glass also had the monoclinic crystal structure. Spectral response curves were recorded over the spectral range 400–1400 nm for semiconductor—electrolyte junctions. Photovoltaic solar cell devices were made using p-type Cu3Sb(SxSe1−x)3 as the absorber layer and n-type CdS as the buffer layer. The photovoltaic effect was observed in these devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Inorganic photovoltaic cells10.1016/S1369-7021(07)70275-4 ↗
2. M.A. Green, K. Emery, Y. Hishikawa, W. Warta, Solar cell efficiency tables (version 36), Progress in Photovoltaics: Research and Applications, 18 346–352.10.1002/pip.1021 ↗
3. Analysis of the silicon market: will thin films profit?10.1016/j.enpol.2006.12.017 ↗
4. F.A. Feltrin, Material challenge for terawatt level deployment of photovoltaics. Photovoltaic energy conversion 2 in: Conference Record of the 2006 IEEE Fourth World Conference, 2006, pp. 2496–2472.10.1109/WCPEC.2006.279727 ↗
5. Sulfosalts—a new class of compound semiconductors for photovoltaic applications10.1016/j.tsf.2006.12.071 ↗
6. Progress in sulfosalt research10.1002/pssa.200881242 ↗
7. The spectral p–n junction model for tandem solar-cell design10.1109/T-ED.1987.22916 ↗
8. Critical issues in the design of polycrystalline, thin-film tandem solar cells10.1002/pip.491 ↗
9. Formation of CuSbS2 and CuSbSe2 thin films via chalcogenisation of Sb–Cu metal precursors10.1016/j.tsf.2011.01.140 ↗
10. p-Type CuSbS2 thin films by thermal diffusion of copper into Sb2S310.1016/j.solmat.2010.06.011 ↗
11. Growth and vacuum post-annealing effect on the properties of the new absorber CuSbS2 thin films10.1016/j.matlet.2008.04.003 ↗
12. CuSbS2 thin film formed through annealing chemically deposited Sb2S3–CuS thin films10.1016/S0022-0248(01)00672-8 ↗
13. Antimony chalcogenide thin films: chemical bath deposition and formation of new materials by post deposition thermal processing
14. Solvothermal crystal growth of CuSbQ2 (Q=S, Se) and the correlation between macroscopic morphology and microscopic structure10.1016/j.jssc.2008.10.025 ↗
15. Cu–Sb library for solar cell absorber material identification
16. Deposition and characterization of copper chalcopyrite based solar cells using electrochemical techniques10.1149/1.2731222 ↗
17. Characterization of RF reactively sputtered Cu–In–S thin films10.1016/S0921-4526(01)00855-9 ↗
18. New routes to sustainable photovoltaics: evaluation of Cu2ZnSnS4 as an alternative absorber material10.1002/pssb.200879539 ↗
19. Pankove · 1971
20. Theoretical considerations governing the choice of the optimum semiconductor for photovoltaic solar conversion10.1063/1.1722483 ↗
21. Study on sulfur diffusion in CuInSe2 thin films using two thermal profiles10.1016/j.tsf.2006.12.059 ↗
22. M. Turcu, I.M. Kötschau, U. Rau, Composition dependence of defect energies and band alignments in the Cu(In1−xGax)(Se1−ySy)2 alloy system, Journal of Applied Physics, 91 1391.10.1063/1.1432126 ↗
23. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
24. Electrical, morphological and structural properties of RF magnetron sputtered Mo thin films for application in thin film photovoltaic solar cells10.1007/s10853-011-5404-0 ↗