Solvent-engineering-processed CsPbIBr2 inorganic perovskite solar cells with efficiency of ∼11%
Source abstract
Abstract
Recently, the cesium lead halide perovskite (CsPbIBr 2 ) materials demonstrating the most balanced bandgap and stability among all inorganic perovskite analogs have received great attention in photovoltaic community. However, the poor quality of solution-processed CsPbIBr 2 films with small grains and massive voids and defects severely impedes its further development. This obstacle issue mainly roots from the slow crystallization process of perovskites when using traditional high boiling point solvent of dimethyl sulfoxide (DMSO). Herein, a novel solvent engineering strategy, namely alcohol-induced rapid crystallization process, is originally developed. We intentionally add some low boiling point alcohols, such as methanol, ethanol, isopropanol, and n-butanol, to form a lower boiling point DMSO-alcohol azeotropic mixture, which can be volatilized quickly and effectively accelerate the crystallization process of CsPbIBr 2 films. Meanwhile, we elaborately adopt some CsI additives to suppress the intrinsic self-doping and passivate the defects of perovskites. Besides, the influence of annealing temperatures on the film quality and device performance is also investigated in this study. Consequently, the pinhole-free, highly crystallized CsPbIBr 2 films with large grains and a preferable (100) orientation are successfully achieved via CsI/methanol treatment recipe when annealed at the optimized temperature of 280 °C. The as-obtained perovskite solar cells (PSCs) with a superior long-term stability feature yield a highly promising power conversion efficiency ( PCE) of 11.49%. To our knowledge, this is the highest reported efficiency among all CsPbIBr 2 inorganic PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
2. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
3. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
4. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
5. Intrinsic thermal instability of methylammonium lead trihalide perovskite10.1002/aenm.201500477 ↗
6. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
7. High-efficiency perovskite solar cells based on the black polymorph of HC (NH2) 2PbI310.1002/adma.201401137 ↗
8. Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells10.1021/acs.jpclett.6b01576 ↗
9. Dual interfacial design for efficient CsPbI2Br perovskite solar cells with improved photostability10.1002/adma.201901152 ↗
10. Inorganic CsPbIBr2‐based perovskite solar cells: fabrication technique modification and efficiency improvement10.1002/solr.201900135 ↗
11. Precise stress control of inorganic perovskite films for carbon-based solar cells with an ultrahigh voltage of 1.622 V10.1016/j.nanoen.2019.104286 ↗
12. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant?10.1002/anie.201910800 ↗
13. Thermodynamically stabilized β-CsPbI3–based perovskite solar cells with efficiencies>1810.1126/science.aav8680 ↗
14. Using SnO2 QDs and CsMBr3 (M= Sn, Bi, Cu) QDs as charge‐transporting materials for 10.6%‐efficiency all‐inorganic CsPbBr3 perovskite solar cells with an ultrahigh open‐circuit voltage of 1.610 V10.1002/solr.201800284 ↗
15. High efficiency (16.37%) of cesium bromide—passivated all‐inorganic CsPbI2Br perovskite solar cells10.1002/solr.201900254 ↗
16. A facile low temperature fabrication of high performance CsPbI2Br all‐inorganic perovskite solar cells10.1002/solr.201700180 ↗
17. CsPbIBr2 perovskite solar cell by spray-assisted deposition10.1021/acsenergylett.6b00341 ↗
18. Highly efficient semitransparent CsPbIBr2 perovskite solar cells via low-temperature processed In2S3 as electron-transport-layer10.1016/j.nanoen.2018.12.097 ↗
19. Interface‐modification‐induced gradient energy band for highly efficient CsPbIBr2 perovskite solar cells10.1002/aenm.201803785 ↗
20. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
21. Hole transport layer free inorganic CsPbIBr2 perovskite solar cell by dual source thermal evaporation10.1002/aenm.201502202 ↗
22. Ultra-thin MoOx as cathode buffer layer for the improvement of all-inorganic CsPbIBr2 perovskite solar cells10.1016/j.nanoen.2017.08.048 ↗
23. Inorganic CsPb1− xSnxIBr2 for efficient wide‐bandgap perovskite solar cells10.1002/aenm.201800525 ↗
24. Phase segregation enhanced ion movement in efficient inorganic CsPbIBr2 solar cells10.1002/aenm.201700946 ↗
25. Intermolecular exchange boosts efficiency of air‐stable, carbon‐based all‐inorganic planar CsPbIBr2 perovskite solar cells to over 910.1002/aenm.201802080 ↗
26. Seed‐assisted growth for low‐temperature‐processed all‐inorganic CsPbIBr2 solar cells with efficiency over 1010.1002/smll.202001535 ↗
27. Light processing enables efficient carbon-based, all-inorganic planar CsPbIBr2 solar cells with high photovoltages10.1021/acsami.8b17839 ↗
28. High-performance CsPbIBr2 perovskite solar cells: effectively promoted crystal growth by antisolvent and organic ion strategies10.1021/acsami.9b09171 ↗
29. Aged precursor solution toward low-temperature fabrication of efficient carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells10.1021/acsaem.8b00972 ↗
30. Highly efficient CsPbIBr2 perovskite solar cells with efficiency over 9.8% fabricated using a preheating-assisted spin-coating method10.1039/C9TA03336J ↗
31. Enhancing optical, electronic, crystalline, and morphological properties of cesium lead halide by Mn substitution for high‐stability all‐inorganic perovskite solar cells with carbon electrodes10.1002/aenm.201800504 ↗
32. Bifunctional dye molecule in all‐inorganic CsPbIBr2 perovskite solar cells with efficiency exceeding 1010.1002/solr.201900212 ↗
33. Flux-mediated growth strategy enables low-temperature fabrication of high-efficiency all-inorganic CsPbIBr2 perovskite solar cells, Electrochim
34. Band alignment engineering towards high efficiency carbon‐based inorganic planar CsPbIBr2 perovskite solar cells10.1002/cssc.201900611 ↗
35. Optimizing the substrate pre-heating and post-annealing temperatures for fabricating high-performance carbon-based CsPbIBr2 inorganic perovskite solar cells10.1016/j.electacta.2020.136354 ↗
36. Interfacial TiO2 atomic layer deposition triggers simultaneous crystallization control and band alignment for efficient CsPbIBr2 perovskite solar cell10.1016/j.orgel.2019.07.006 ↗
37. Recycling of FTO/TiO2 substrates: route toward simultaneously high-performance and cost-efficient carbon-based, all-inorganic CsPbIBr2 solar cells10.1021/acsami.9b21331 ↗
38. Vapor-assisted deposition of CsPbIBr2 films for highly efficient and stable carbon-based planar perovskite solar cells with superior Voc10.1016/j.electacta.2019.135266 ↗
39. Controllable grain morphology of perovskite absorber film by molecular self-assembly toward efficient solar cell exceeding 1710.1021/jacs.5b06444 ↗
40. Thermal stability-enhanced and high-efficiency planar perovskite solar cells with interface passivation10.1021/acsami.7b10994 ↗
41. Suppressing intrinsic self-doping of CsPbIBr2 films for high-performance all-inorganic, carbon-based perovskite solar cells10.1039/D0SE00774A ↗
42. Chlorine-conducted defect repairment and seed crystal-mediated vapor growth process for controllable preparation of efficient and stable perovskite solar cells10.1039/C5TA06813D ↗
43. Uniform, stable, and efficient planar-heterojunction perovskite solar cells by facile low-pressure chemical vapor deposition under fully open-air conditions10.1021/am5077588 ↗
44. Crystal growth of the perovskite semiconductor CsPbBr3: a new material for high-energy radiation detection10.1021/cg400645t ↗
45. Thermochromic halide perovskite solar cells10.1038/s41563-017-0006-0 ↗
46. Lanthanide ions doped CsPbBr3 halides for htm‐free 10.14%‐efficiency inorganic perovskite solar cell with an ultrahigh open‐circuit voltage of 1.594 V10.1002/aenm.201802346 ↗
47. Point defect engineering in thin-film solar cells10.1038/s41578-018-0026-7 ↗
48. Impact of surfaces on photoinduced halide segregation in mixed-halide perovskites10.1021/acsenergylett.8b01562 ↗