journal article·2020-10

Mechanical properties and field performance of hydrophobic antireflective sol-gel coatings on the cover glass of photovoltaic modules

Cecilia Agustín-Sáenz, Maider Machado, Jiri Nohava, Naiara Yurrita, Asier Sanz, Marta Brizuela, Oihana Zubillaga, Agnieszka Tercjak

Publisher page

Abstract

Abstract The front cover glass required for photovoltaic (PV) module insulation is the first surface in receiving irradiation towards solar cell, and the first surface in limiting the photon flux impinging it due to optical losses, which can be counteracted by means of antireflective (AR) coatings. The soiling adherence inherently disrupts the intended function of the AR coatings, thus reducing the power output of the PV plants. In this work, hydrophobicity of highly antireflective layer stacks was pursued to deal against soiling adherence. Whereas antireflection property has a direct effect on the minimization of cell-to-module losses, antisoiling property reduces maintenance expenditures, both contributing to the reduction of levelized cost of energy. Properties of methyl-silylated silica and polyfluoroalkyl-silica mono- and bi-layer stacks were compared to achieve the most rational AR design based on a proper trade-off between cost-efficiency, processability, optical properties, mechanical properties and reliability during real life operation. Nanoindentation permitted to compare hardness of different coatings; cohesion and adhesion were studied by nanoscratch, both related to cleaning resistance studied by reciprocating wear test. Effect of AR layer stacks on electrical response of monocrystalline silicon cells was assessed during outdoor exposure as well as the effect of environmental relative humidity on the optical properties. Methyl-silylated silica mono-layer and polyfluoroalkyl-silica bi-layer both prepared in two-steps were the more rational designs based on adhesion, mechanical properties and abrasion resistance to cleaning process. They showed an equivalent overgeneration of 2% when applied on cover glass of PV mono-modules compared to uncoated ones along one-year exposure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. High-efficiency silicon solar cell concepts
2. Photovoltaic power systems technology collaboration Programme
3. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
4. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
5. Glass needs for a growing photovoltaics industry10.1016/j.solmat.2014.09.028 ↗
6. Broadband antireflective coating stack based on mesoporous silica by acid-catalyzed sol-gel method for concentrated photovoltaic application10.1016/j.solmat.2018.06.040 ↗
7. Antireflective mesoporous silica coatings by optimization of water content in acid-catalyzed sol-gel method for application in glass covers of concentrated photovoltaic modules10.1016/j.jcis.2018.09.043 ↗
8. Hydrophobic and spectrally broadband antireflective methyl-silylated silica coatings with high performance stability for concentrated solar applications10.1016/j.solmat.2019.109962 ↗
9. Polyfluoroalkyl-silica porous coatings with high antireflection properties and low surface free energy for glass in solar energy application10.1016/j.apsusc.2019.144864 ↗
10. The performance and durability of single-layer sol-gel anti-reflection coatings applied to solar module cover glass10.1016/j.surfcoat.2018.11.030 ↗
11. Superhydrophilic self-cleaning surfaces based on TiO2 and TiO2/SiO2 composite films for photovoltaic module cover glass10.1186/s40563-015-0034-4 ↗
12. Super-durable closed-surface antireflection thin film by silica nanocomposites10.1016/j.solmat.2017.05.043 ↗
13. Preparation of humidity, abrasion, and dust resistant antireflection coatings for photovoltaic modules via dual precursor modification and hybridization of hollow silica nanospheres10.1016/j.solmat.2018.12.032 ↗
14. Anti-soiling coatings for solar cell cover glass: climate and surface properties influence10.1016/j.solmat.2018.05.036 ↗
15. Mechanical properties of hierarchical porous silica thin films: experimental characterization by nanoindentation and Finite Element modeling10.1016/j.micromeso.2010.09.004 ↗
16. Determination of Young's modulus and yield stress of porous low-k materials by nanoindentation10.1016/j.surfcoat.2006.08.077 ↗
17. Determination of young's modulus of porous low-k films by ellipsometric porosimetry10.1149/1.1517771 ↗
18. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
19. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
20. ASTM G173-03
21. Sur la réfraction et la réflexion de la lumière
22. Theiss
23. Constitutive relations in the wetting of low energy surfaces and the theory of the retraction method of preparing monolayers
24. Structural evolution during the gel to glass conversion10.1016/0022-3093(85)90286-8 ↗
25. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
26. Study of nano-mechanical properties for thin porous films through instrumented indentation: SiO2 low dielectric constant films as an example10.1016/j.mee.2008.03.006 ↗
27. Adhesion testing by the scratch test method: the influence of intrinsic and extrinsic parameters on the critical load10.1016/0040-6090(87)90377-4 ↗
28. Optimized cleaning cost and schedule based on observed soiling conditions for photovoltaic plants in central Saudi Arabia10.1109/JPHOTOV.2016.2535308 ↗