Effect of bending test on the performance of CdTe solar cells on flexible ultra-thin glass produced by MOCVD
Source abstract
Abstract
The development of lightweight and flexible solar modules is highly desirable for high specific power applications, building integrated photovoltaics, unmanned aerial vehicles and space. Flexible metallic and polyimide foils are frequently used, but in this work an alternative substrate with attractive properties, ultra-thin glass (UTG) has been employed. CdTe solar cells with average efficiency reaching 14.7% AM1.5G efficiency have been produced on UTG of 100 μm thickness. Little has been reported on the effects on PV performance when flexed, so we investigated the effects on J-V parameters when the measurements were performed in 40 mm and 32 mm bend radius, and in a planar state before and after the bend curvature was applied. The flat J-V measurements after 32 mm bending test showed some improvement in efficiency, Voc and FF, with values higher than the first measurement in a planar state. In addition, two CdTe solar cells with identical initial performance were subjected to 32 mm static bending test for 168 hours, the results showed excellent uniformity and stability and no significant variation on J-V parameters was observed. External quantum efficiency and capacitance voltage measurements were performed and showed no significant change in spectral response or carrier concentration. Residual stress analysis showed that no additional strain was induced within the film after the bending test and that the overall strain was low. This has demonstrated the feasibility of using CdTe solar cells on UTG in new applications, when a curved module is required without compromising performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · solar cell performance optimization · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Past, present and future of the thin film CdTe/CdS solar cells10.1016/j.solener.2018.01.018 ↗
2. High efficiency ultra-thin sputtered CdTe solar cells10.1016/j.solmat.2006.02.029 ↗
3. 14%-efficient flexible CdTe solar cells on ultra-thin glass substrates10.1063/1.4870834 ↗
4. Influence of minimum position in [Ga]/([Ga]+[In]) profile of Cu(In,Ga)Se2 on flexible stainless steel substrate on its photovoltaic performances10.1016/j.solmat.2016.07.048 ↗
5. Cu(In,Ga)Se2 solar cells on low cost mild steel substrates10.1016/j.solener.2017.12.057 ↗
6. Highly flexible InSnO electrodes on thin colourless polyimide substrate for high-performance flexible CH3NH3PbI3 perovskite solar cells10.1016/j.jpowsour.2016.12.026 ↗
7. Face-to-face transferred multicrystalline ITO films on colorless polyimide substrates for flexible organic solar cells10.1016/j.nanoen.2014.10.030 ↗
8. Characterization of MOCVD thin-film CdTe photovoltaics on space-qualified cover glass10.1109/JPHOTOV.2016.2520199 ↗
9. CIGS solar cells on flexible ultra-thin glass substrates: characterization and bending test10.1016/j.tsf.2015.09.006 ↗
10. Epitaxial processing optimization and photoluminescence spectra of CdTe thin films grown on highly dissimilar SrTiO3(001) by molecular beam epitaxy10.1016/j.tsf.2018.11.047 ↗
11. Enhanced efficiency of CdTe Photovoltaic by thermal evaporation Vacuum10.1016/j.egypro.2018.11.229 ↗
12. Electrodeposition of wurtzite CdTe and the potential dependence of the phase structure10.1016/j.matlet.2015.12.060 ↗
13. Preparation, characterization and ab-initio study of CdSnTe2 thin films by closed space sublimation technique10.1016/j.spmi.2015.12.011 ↗
14. The large-area CdTe thin film for CdS/CdTe solar cell prepared by physical vapor deposition in medium pressure10.1016/j.apsusc.2015.11.058 ↗
15. All-sputtered CdTe solar cell activated with a novel method10.1016/j.solener.2019.09.023 ↗
16. Preparation and characterization of pulsed laser deposited Sb2Te3 back contact for CdTe thin film solar cell10.1016/j.apsusc.2018.05.075 ↗
17. Study of thin film poly-crystalline CdTe solar cells presenting high acceptor concentrations achieved by in-situ arsenic doping10.1016/j.solmat.2019.02.025 ↗
18. Study on the uniformity of ZnO films grown by MOCVD10.1016/j.ceramint.2019.04.096 ↗
19. Effect of post deposition heat treatment on microstructure parameters, optical constants and composition of thermally evaporated CdTe thin films10.1016/j.mssp.2016.11.028 ↗
20. Light soaking effects on photovoltaic modules: overview and literature review
21. Prevéy · 1986 · 380
22. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
23. Carrier providers or killers: the case of Cu defects in CdTe
24. Separating grain-boundary and bulk recombination with time-resolved photoluminescence microscopy10.1063/1.5010931 ↗
25. Degradation of flexible thin-film solar cells due to a mechanical strain10.1016/j.opelre.2017.02.003 ↗
26. Compressive and tensile bending of sputter deposited Al/Mo bilayers10.1016/j.scriptamat.2018.11.048 ↗
27. Electrophoretic displays fabricated on ultra-slim flexible glass substrates10.1109/JDT.2012.2206558 ↗
28. Role of residual stress and texture of ZnO nanocrystals on electro-optical properties of ZnO/Ag/ZnO multilayer transparent conductors10.1016/j.jallcom.2017.11.028 ↗
29. CIGS solar cells on ultra-thin glass substrates: determination of mechanical properties by nanoindentation and application to bending-induced strain calculation10.1016/j.solmat.2016.11.022 ↗