Photovoltaic broadband photodetectors based on CH3NH3PbI3 thin films grown on silicon nanoporous pillar array
Source abstract
Abstract
Abstract The research of broadband photodetectors has been attracting extensive attention because of their great importance and application potentials in numerous fields. In this study, we proposed a perovskite-based photovoltaic broadband photodetector using silicon nanoporous pillar array (Si-NPA) as the hole-transport layer as well as the growth template. By optimizing the conditions of solvent vapors annealing approach, the conformal growth of high-quality CH3NH3PbI3 (MAPbI3) thin films was achieved with a high material integrity, thus enabling a rapid and efficient carrier transport at the MAPbI3/Si-NPA interface. The photoresponse analysis reveals that the devices exhibit a high light sensitivity from the deep ultraviolet to the near-infrared region and a pronounced photovoltaic behavior. Typically, a high on/off ratio of 0.82 × 105, a photoresponsivity of 8.13 mA/W, a specific detectivity of 0.974 × 1013 Jones, and fast response speeds of 253.3/230.4 μs were achieved at zero bias under light illumination of 780 nm. Because of the using of air-stable inorganic carrier-transport layers (Si-NPA, ZnO), and the coaxial core/shell heterojunction architecture for a full protection of vulnerable MAPbI3 active layer from exposure to air ambient, the photodetectors without encapsulation can operate with an excellent stability and repeatability in a wide frequency range over 5000 Hz and continuous light switching (1200 cycles). Even after one-month storage in air ambient, the devices can operate properly with only 8% photocurrent decay. The results obtained provide an effective strategy for the design and development of high-performance broadband photodetectors by combining the advantages of perovskites and functional Si-NPA template.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Third-generation infrared photodetector arrays10.1063/1.3099572 ↗
2. Near-infrared-light photodetectors based on one-dimensional inorganic semiconductor nanostructures10.1002/adom.201700081 ↗
3. Infrared detectors: status and trends10.1016/S0079-6727(02)00024-1 ↗
4. Organic photonics for communications10.1038/nphoton.2010.160 ↗
5. Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit10.1038/s41566-017-0012-4 ↗
6. Photodetectors based on inorganic halide perovskites: materials and devices
7. Broadband, ultrafast, self-driven photodetector based on Cs-doped FAPbI3 perovskite thin film10.1002/adom.201700654 ↗
8. Low-voltage photodetectors with high responsivity based on solution-processed micrometer-scale all-inorganic perovskite nanoplatelets
9. Organic photodiodes: the future of full color detection and image sensing10.1002/adma.201505405 ↗
10. High-detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗
11. High-performance perovskite photodetectors based on solution-processed all-inorganic CsPbBr3 thin films10.1039/C7TC02137B ↗
12. High-performance flexible broadband photodetector based on organolead halide perovskite10.1002/adfm.201402020 ↗
13. Ultrasensitivity broadband photodetectors based on perovskite: research on film crystallization and electrode optimization10.1016/j.orgel.2017.03.023 ↗
14. Excitons versus free charges in organo-lead tri-halide perovskites10.1038/ncomms4586 ↗
15. Band filling with free charge carriers in organometal halide perovskites10.1038/nphoton.2014.171 ↗
16. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
17. Depleted hole conductor-free lead halide iodide heterojunction solar cells10.1039/c3ee42282h ↗
18. Localized surface plasmon enhanced all-inorganic perovskite quantum dot light-emitting diodes based on coaxial core/shell heterojunction architecture
19. Ultrasensitive photodetectors based on island-structured CH3NH3PbI3 thin films10.1021/acsami.5b05221 ↗
20. A flexible UV–Vis–NIR photodetector based on a perovskite/conjugated-polymer composite10.1002/adma.201600468 ↗
21. Toward high uniformity of photoresponse broadband hybrid organic-inorganic photodiode based on PVP-modified perovskite10.1002/adom.201700509 ↗
22. Forward and reverse electron transport properties across a CdS/Si multi-interface nanoheterojunction
23. Temperature-dependent photoluminescence from GaN/Si nanoporous pillar array
24. Effect of annealing treatment on electroluminescence from GaN/Si nanoheterostructure array10.1364/OE.20.005636 ↗
25. Yellow electroluminescence realized in GaN/Si nanoheterostructures based on silicon nanoporous pillar array10.1016/j.jlumin.2018.03.049 ↗
26. Silicon/perovskite core−shell heterojunctions with light-trapping effect for sensitive self-driven near-infrared photodetectors10.1021/acsami.8b08387 ↗
27. Hole-transport materials for perovskite solar cells10.1002/anie.201601757 ↗
28. Recent advances in spiro-MeOTAD hole transport material and its applications in organic-inorganic halide perovskite solar cells
29. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
30. Hybrid organic-inorganic perovskite photodetectors10.1002/smll.201702107 ↗
31. Interface engineering of high-performance perovskite photodetectors based on PVP/SnO2 electron transport layer10.1021/acsami.7b18511 ↗
32. Isomer-pure bis-PCBM-assisted crystal engineering of perovskite solar cells showing excellent efficiency and stability
33. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
34. Improved crystallization of perovskite films by optimized solvent annealing for high efficiency solar cell10.1021/acsami.5b06780 ↗
35. Present status and future prospects for development of non- or reduced-indium transparent conducting oxide thin films10.1016/j.tsf.2008.09.059 ↗
36. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
37. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
38. Identifying the molecular structures of intermediates for optimizing the fabrication of high-quality perovskite films10.1021/jacs.6b04924 ↗
39. Ultrahigh-responsivity photodetectors from perovskite nanowire arrays for sequentially tunable spectral measurement10.1021/acs.nanolett.7b00166 ↗
40. Two-dimensional CH3NH3PbI3 perovskite: synthesis and optoelectronic application10.1021/acsnano.5b07791 ↗
41. Saturated vapor-assisted growth of single-crystalline organic-inorganic hybrid perovskite nanowires for high-performance photodetectors with robust stability10.1021/acsami.7b17176 ↗
42. Polarized emission effect realized in CH3NH3PbI3 perovskite nanocrystals10.1039/C7TC03104A ↗
43. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
44. Trap states in lead iodide perovskites10.1021/ja512833n ↗
45. Signatures of exciton dynamics and carrier trapping in the time-resolved photoluminescence of colloidal CdSe nanocrystals10.1021/jp9078772 ↗
46. Controllable vapor-phase growth of inorganic perovskite microwire networks for high-efficiency and temperature-stable photodetectors10.1021/acsphotonics.8b00348 ↗
47. Highly efficient and stable self-powered ultraviolet and deep-blue photodetector based on Cs2AgBiBr6/SnO2 heterojunction10.1002/adom.201800811 ↗
48. Self-assembled UV photodetector made by direct epitaxial GaN growth on graphene10.1021/acsami.8b01194 ↗
49. A non-volatile ‟programmable” transparent multilevel ultra-violet perovskite photodetector10.1039/C8NR01959B ↗
50. Rapid, stable and self-powered perovskite detectors via a fast chemical vapor deposition process10.1039/C7RA01430A ↗
51. Concepts in photoconductivity and allied problems10.1021/ja01078a086 ↗
52. High-efficiency and air-stable perovskite quantum dots light-emitting diodes with an all-inorganic heterostructure10.1021/acs.nanolett.6b04116 ↗
53. Colloidal synthesis of air-Stable CH3NH3PbI3 quantum dots by gaining chemical insight into the solvent effects10.1021/acs.chemmater.7b01100 ↗
54. Direct conversion of perovskite thin films into nanowires with kinetic control for flexible optoelectronic devices10.1021/acs.nanolett.5b03504 ↗
55. High-performance broadband perovskite photodetectors based on CH3NH3PbI3/C8BTBT heterojunction10.1002/aelm.201700058 ↗
56. Enhanced performance of perovskite/organic-semiconductor hybrid heterojunction photodetectors with the electron trapping effect10.1039/C7TC05321E ↗
57. Strategy of solution-processed all-inorganic heterostructure for humidity/temperature-stable perovskite quantum dot light-emitting diodes10.1021/acsnano.7b07856 ↗
58. Air-stable polymer electronic devices10.1002/adma.200602653 ↗