Numerical simulations of hole carrier selective contacts in p-type c-Si solar cells
Source abstract
Abstract
Abstract This work presents a systematic analysis of the transport mechanism and surface passivation of tunneling oxide (SiO2)/p-type poly-silicon (poly-Si(p)) junctions applied to p-type crystalline silicon (c-Si) solar cells by means of TCAD numerical simulations. We report on the impact of the buried doped region (BDR) in the c-Si wafer on the transport and passivation of SiO2/poly-Si(p) junctions. We show that a BDR is not necessary for carrier selective contacts (CSCs) with a tunnel oxide thinner than 1.2 nm and for surface recombination velocity at SiO2/c-Si interface below 1·103 cm/s. Then, we explore alternative semiconductors to poly-Si for tunnel oxide passivating contacts. We find that 3C–SiC(p) is a promising candidate thanks to its valence band offset with respect to silicon, driving the wafer surface into a condition of strong accumulation. We show that excellent SiO2/3C–SiC(p) junctions are obtained for doping density of the 3C–SiC(p) larger than 5·1019 cm−3 and for SiO2 thinner than Finally, with the aim of deriving guidelines for material selection, we present an investigation on the influence of the electron affinity and bandgap of the semiconductor layer forming the passivating contact, demonstrating that conversion efficiency is maximized for built-in voltages between 0.4 and 2.6 eV.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. ITRPV · 2018
2. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%
3. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
4. Principles of carrier-selective contacts based on induced junctions
5. High-gain bipolar transistors with polysilicon tunnel junction emitter contacts10.1109/T-ED.1985.22116 ↗
6. Polysilicon emitters for bipolar transistors: a review and Re-evaluation of theory and experiment10.1109/16.141239 ↗
7. “A 720 mV open circuit voltage SiOx : c-Si : SiOx double heterostructure solar cell10.1063/1.96331 ↗
8. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
9. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
10. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
11. IBC c-Si solar cells based on ion-implanted poly-silicon passivating contacts
12. 2017
13. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
14. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
15. Silicon-rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
16. 23% efficient P-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
17. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
18. Theoretical investigation of carrier-selective contacts featuring tunnel oxides by means of numerical device simulation10.1016/j.egypro.2015.07.027 ↗
19. Numerical simulation of carrier-selective electron contacts featuring tunnel oxides10.1109/JPHOTOV.2015.2455346 ↗
20. Modeling the potential of screen printed front junction CZ silicon solar cell with tunnel oxide passivated back contact10.1002/pip.2809 ↗
21. Analysis of silicon solar cells with poly-Si/SiOxcarrier-selective base and emitter contacts10.1109/JPHOTOV.2017.2775142 ↗
22. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
23. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide10.1063/1.4986924 ↗
24. Temperature-dependent contact resistance of carrier selective Poly-Si on oxide junctions10.1016/j.solmat.2018.05.046 ↗
25. Synopsis · 2013 · 2009
26. Simplified process for high efficiency, self-aligned IBC c-Si solar cells combining ion implantation and epitaxial growth: design and fabrication10.1016/j.solmat.2016.05.021 ↗
27. Opto-electrical modelling and optimization study of a novel IBC c-Si solar cell10.1002/pip.2874 ↗
28. Comparison of raised and Schottky source/drain MOSFETs using a novel tunneling contact model
29. Gehring · 2003
30. Modeling of tunneling current and gate dielectric reliability for nonvolatile memory devices10.1109/TDMR.2004.836727 ↗
31. Schenk · 2010
32. P. Procel, G. Yang, O. Isabella, and M. Zeman, “Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells,” Sol. Energy Mater. Sol. Cells, vol. 186, no. June, pp. 66–77, Nov. 2018.10.1016/j.solmat.2018.06.021 ↗
33. Approaching efficiencies above 25% with both sides-contacted silicon solar cells
34. Modeling CMOS tunneling currents through ultrathin gate oxide due to conduction- and valence-band electron and hole tunneling10.1109/16.930653 ↗
35. Numerical simulations of IBC solar cells based on poly-Si carrier-selective passivating contacts10.1109/JPHOTOV.2019.2892527 ↗
36. On the electron affinity of silicon carbide polytypes10.1134/S1063782607060152 ↗
37. Wet-chemical preparation of silicon tunnel oxides for transparent passivated contacts in crystalline silicon solar cells10.1021/acsami.8b02002 ↗
38. Finite-temperature full random-phase approximation model of band gap narrowing for silicon device simulation10.1063/1.368545 ↗
39. A unified mobility model for device simulation I, Model equations and concentration dependence.pdf10.1016/0038-1101(92)90325-7 ↗
40. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
41. Reassessment of the intrinsic carrier density in crystalline silicon in view of band-gap narrowing10.1063/1.1529297 ↗
42. 2012
43. A.F.Ioffe Institute, “SiC - silicon Carbide parameters database,” Electronic Archive New Semiconductor Materials. Characteristics and Properties. .
44. Band gap narrowing in n-type and p-type 3C-, 2H-, 4H-, 6H-SiC, and Si10.1063/1.371380 ↗
45. Electron mobility models for 4H, 6H, and 3C SiC10.1109/16.930664 ↗