journal article·2015-03

Fluorine doped zinc tin oxide multilayer transparent conducting Oxides for organic photovoltaic׳s Cells

Rina Pandey, Chang Hwan Wie, Xie Lin, Ju Won Lim, Kyung Kon Kim, Do Kyung Hwang, Won Kook Choi

Publisher page

Abstract

Abstract Few nm of Ag layer embedded in fluorine doped zinc tin oxide FZTO/Ag/FZTO was fabricated on glass by radio frequency magnetron sputtering at room temperature for the applications of organic photovoltaic׳s cells. The structural, electrical and optical properties of FZTO thin films were investigated. The multilayer of the FZTO (40 nm)/Ag (9 nm)/FZTO (40 nm) electrode shows the maximum optical transmittance ( λ =380–770 nm) of 88.15%, quite low electrical resistivity of ~8×10 −5 Ω cm and the corresponding figure of merit (T 10 / R sq ) is equivalent to 3.46×10 −2 Ω −1 . A normal organic photovoltaic׳s (OPV) structure of poly[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b]dithiophene-2,6-diyl][3-fluoro-2-[(2 ethylhexyl)carbonyl]thieno[3,4-b]-thiophenediyl] (PTB7): phenyl-C70-butyric acid methyl ester (PC70BM) was fabricated on glass/FZTO/Ag/FZTO to examine the compatibility of OPV as a transparent conducting electrode. The bulk hetero-junction organic photovoltaic׳s device fabricated on the multilayer FAF electrode exhibited open circuit voltage ( V oc ) of 0.72 V, a short circuit current ( J sc ) of 12.28 mA/cm 2 , a fill factor (FF) of 0.54. These properties are analogous to V oc =0.75 V, J sc =14.87 mA/cm 2 , FF =0.53 on commercial indium tin oxide (ITO). A resultant power conversion efficiency of 4.84% is comparable with the 5.90% of the same OPV structure on the commercial ITO as a reference. This reveals that FZTO/Ag/FZTO multilayer electrode is a promising electrode scheme for bulk hetero-junction organic photovoltaic׳s cells (BHJ-OPVs).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Hartnagel · 1995 · 306
2. Transparent conductive Al doped ZnO thin films produced by pulsed laser deposition
3. Transparent conducting zinc oxide thin films doped with aluminum and molybdenum10.1116/1.2735951 ↗
4. Fabrication of aluminum doped zinc oxide (AZO) transparent conductive oxide by ultrasonic spray pyrolysis10.1016/j.cap.2012.05.027 ↗
5. Growth of Transparent Conductive Al-doped ZnO thin films and Device Applications10.1143/JJAP.45.8453 ↗
6. Deposition of boron doped zinc oxide films and their electrical and optical properties10.1149/1.2221166 ↗
7. Deposition and characterization of transparent and conductive sprayed ZnO:B thin films10.1016/j.jpcs.2005.08.086 ↗
8. Transparent and conductive Ga-doped ZnO films grown by RF magnetron sputtering on polycarbonate substrates10.1016/j.solmat.2010.02.026 ↗
9. Effect of composition and deposition temperature on the characteristics of Ga doped ZnO thin films10.1016/j.apsusc.2010.06.045 ↗
10. Electrical properties of transparent and conducting Ga doped ZnO10.1063/1.2218466 ↗
11. Properties of fluorine doped ZnO thin films deposited by magnetron sputtering10.1016/j.solmat.2008.05.010 ↗
12. Non-metallic element (chlorine) doped zinc oxide grown by pulsed laser deposition for application in transparent electrode10.1016/j.cap.2012.05.019 ↗
13. Carrier transport in polycrystalline transparent conductive oxides: A comparative study of zinc oxide and indium oxide10.1016/j.tsf.2007.05.084 ↗
14. Ag interlayered transparent conducting electrode for photovoltaic cells10.7567/JJAP.51.10NE07 ↗
15. Conduction and transmission analysis in gold nanolayers embedded in zincoxide for flexible electronics10.1063/1.3435467 ↗
16. Comparative investigation of transparent ITO/Ag/ITO and ITO/Cu/ITO electrodes grown by dual-target DC sputtering for organic photovoltaics10.1149/1.3131362 ↗
17. Influence of nickel thickness on the properties of ITO/Ni/ITO thin films10.1016/j.jallcom.2008.11.065 ↗
18. Transparent conducting GZO, Pt/GZO, and GZO/Pt/GZO thin films10.1016/j.tsf.2007.05.051 ↗
19. AZO/Ag/AZO multilayer films prepared by DC magnetron sputtering for dye-sensitized solar cell application10.1016/j.cap.2009.09.020 ↗
20. Thin Ag layer inserted GZO multilayer grown by roll to roll sputtering for flexible and transparent conducting electrodes10.1149/1.3454125 ↗
21. Study of a sandwich structure of transparent conducting oxide films prepared by electron beam evaporation at room temperature10.1186/1556-276X-7-304 ↗
22. Organic photovoltaics cells fabricated on a SnOx/Ag/SnOx multilayer transparent conducting electrode10.1016/j.tsf.2012.05.029 ↗
23. Nano sized Ag inserted amorphous ZnSnO3 multilayer electrodes for cost efficient inverted organic solar cells10.1016/j.solmat.2011.01.013 ↗
24. C.C. Wu, P.S. Chen, TiOx/Ag/TiOx multilayer for application as a transparent conductive electrode and heat mirror, J Mater Sci.: Mater Electron. doi:10.1007/s10854-013-1118-1.10.1007/s10854-013-1118-1 ↗
25. Study of optical and electrical properties of TiO2/Ag/TiO2 multilayers10.3938/jkps.44.717 ↗
26. Flexible IZO/Ag/IZO/Ag multilayer electrode grown on a polyethylene terepthalate substrate using roll to roll sputtering
27. Conductive and transparent multilayer films for low temperature TiO2/Ag/SiO2 electrodes by E-beam evaporation with IAD10.1186/1556-276X-9-35 ↗
28. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
29. Rapid thermal annealing effect on the characteristics of ZnSnO3 films prepared by RF magnetron sputtering10.1016/j.cap.2012.05.014 ↗
30. Structural and electrical properties of fluorine doped zinc tin oxide thin films prepared by radio-frequency magnetron sputtering10.1016/j.cap.2014.03.020 ↗
31. Highly transparent ZTO/Ag/ZTO multilayer electrode deposited by In-line sputtering process for organic photovoltaic׳s cells
32. Induced transmission in absorbing films applied to band pass filter design10.1364/JOSA.47.000230 ↗
33. Principles of design of architectural coatings10.1364/AO.22.004127 ↗
34. Macleod · 2001 · 328
35. Dependence of electrical, optical and structural properties on the thickness of IZTO thin films grown by linear facing target sputtering for organic solar cells10.1016/j.solmat.2010.05.056 ↗
36. New figure of merit for transparent conductors10.1063/1.323240 ↗
37. The effect of annealing atmospheres on structural, electrical and optical properties of the ATO films prepared by RD magnetron sputtering10.1142/S1793604710001068 ↗
38. Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends10.1021/ja8012598 ↗
39. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
40. A brief history of the developments of organic and polymeric photovoltaic׳s10.1016/j.solmat.2004.02.021 ↗
41. Ultra-thin metal layer passivation of the transparent conductive anode in organic solar cells10.1016/j.solmat.2008.06.016 ↗