Enhanced performance and stability in polymer photovoltaic cells using lithium benzoate as cathode interfacial layer
Source abstract
Abstract
Abstract We report the enhanced performance and stability of polymer solar cells based on regioregular poly(3-hexylthiophene) (P3HT) and methanofullerene [6,6]-phenyl C 61 -butyric acid methyl ester (PCBM) blend using lithium benzoate (C 6 H 5 COOLi) as cathode buffer layer between the active layer and the Al cathode. The effects of the C 6 H 5 COOLi thickness on the performance of polymer solar cell are also investigated. Under 100 mW/cm 2 white light illumination, the device with 1 nm thick C 6 H 5 COOLi as cathode buffer layer exhibits power conversion efficiency (PCE) as high as 3.41±0.07% and the device stability is greatly extended. Compared to the solar cell with LiF/Al cathode, the PCE is increased ca. 9.4%. Introduction of C 6 H 5 COOLi buffer layer effectively increases the shunt resistance and improves the photo-generated charge collection. The improved performance may attribute to the dissociation of semi-conducting C 6 H 5 COOLi upon deposition to liberate Li with a low work function, which reduces the interface resistance of the active layer and the cathode and enhances the interior electric field that may result in efficient charge transportion. In addition, the C 6 H 5 COOLi layer may serve as an effective oxygen and moisture diffusion barrier for the organic solar cells. Therefore, C 6 H 5 COOLi is a promising candidate as an interlayer to improve the efficiency of electron collection and to reduce the ambience influence on the stability of polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
2. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
3. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
4. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
5. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
6. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
7. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
8. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
9. Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells
10. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
11. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
12. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
13. Out-door testing and long-term stability of plastic solar cells10.1051/epjap:2006159 ↗
14. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
15. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
16. Lifetimes of organic photovoltaics: using TOF-SIMS and 18O2 isotopic labelling to characterise chemical degradation mechanisms10.1016/j.solmat.2005.03.004 ↗
17. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
18. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
19. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
20. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
21. Low-work-function surface formed by solution-processed and thermally deposited nanoscale layers of cesium carbonate10.1002/adfm.200700051 ↗
22. Polymer photovoltaic devices with highly transparent cathodes10.1016/j.orgel.2008.08.007 ↗
23. Effect of CsF interlayer on the performance of polymer bulk heterojunction solar cells10.1016/j.solmat.2009.01.005 ↗
24. Effects of thermal annealing on polymer photovoltaic cells with buffer layers and in situ formation of interfacial layer for enhancing power conversion efficiency10.1016/j.synthmet.2008.06.011 ↗
25. Effects of intrinsic ZnO buffer layer based on P3HT/PCBM organic solar cells with Al-doped ZnO electrode10.1016/j.solmat.2008.11.033 ↗
26. Performance improvement of polymer solar cells by using a solution processible titanium chelate as cathode buffer layer10.1063/1.2757125 ↗
27. Air-stable polymer electronic devices10.1002/adma.200602653 ↗
28. Enhancing the photovoltage of polymer solar cells by using a modified cathode10.1002/adma.200602597 ↗
29. Enhanced charge collection in polymer photovoltaic cells by using an ethanol-soluble conjugated polyfluorene as cathode buffer layer10.1016/j.solmat.2008.12.007 ↗
30. Improved open-circuit voltage and efficiency in organic solar cells using a phosphine oxide based interlayer material10.1016/j.solmat.2010.04.008 ↗
31. Effect of cathode buffer layer on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2010.05.043 ↗
32. Enhanced hole injection in organic light-emitting diodes using a SAM-derivatised ultra-thin gold anode supported on ITO glass10.1039/b208169p ↗
33. A robust ultrathin, transparent gold electrode tailored for hole injection into organic light-emitting diodes10.1039/b211775b ↗
34. Flexible encapsulation for organic solar cells
35. Encapsulation of pentacene/C60 organic solar cells with Al2O3 deposited by atomic layer deposition10.1063/1.2751108 ↗
36. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗
37. Photoelectron spectroscopy of the contact between the cathode and the active layers in plastic solar cells: the role of LiF10.1143/JJAP.44.3695 ↗
38. High efficiency organic light-emitting devices with Al/NaF cathode10.1063/1.1537048 ↗
39. Charge injection into cathode-doped amorphous organic semiconductor10.1103/PhysRevB.71.085207 ↗
40. Evidence for alkali metal formation at a cathode interface of organic electroluminescent devices by thermal decomposition of alkali metal carboxylates during their vapor deposition10.1063/1.1819984 ↗
41. High-performance air-processed polymer fullerene bulk heterojunction solar cells10.1002/adfm.200900311 ↗
42. ISOS-1 and ISOS-2, 〈http://isos.wikispaces.com〉.