journal article·2012-05

Double screen printed metallization of crystalline silicon solar cells as low as 30μm metal line width for mass production

Minkyu Ju, Youn-Jung Lee, Jonghwan Lee, Bonggi Kim, Kyungyul Ryu, Kyuho Choi, Kyuwan Song, Kyungsoo Lee, Changsoon Han, Youngmi Jo, Junsin Yi

Publisher page

Abstract

Abstract One of the main objectives of the current single c-Si photovoltaic research is to enhance solar cell efficiency with the low cost approach. A simple way to improve the solar cell efficiency is to enhance the absorption of light as much as possible. In this study, we reduced the finger width pattern from 80 μm to 30 μm and then double printed to minimize shadow loss without any increase in series resistance. The single screen printing of 80 μm finger width resulted in efficiency of 17.66%, whereas 30 μm finger width resulted in efficiency of 15.83%, which is due to a decrease in FF. An 18.06% efficient solar cell with Jsc of 37.31 mA/cm 2 , Voc of 627.3 mV and FF of 77.2% is obtained using the double screen printing pattern of 30 μm wide fingers. The increase in finger thickness resulted in increase in FF and hence efficiency. This novel method can be applied for mass production due to the simple double screen printing process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Photovoltaic materials, history, status and outlook10.1016/S0927-796X(02)00092-X ↗
2. Photovoltaic solar cells: an overview of state-of-the-art cell development and environmental issues10.1016/j.pcrysgrow.2005.10.002 ↗
3. Solar photovoltaics R&D at the tipping point: a 2005 technology overview10.1016/j.elspec.2005.09.004 ↗
4. High-efficiency crystalline silicon solar cells
5. Buried contact silicon solar cells10.1016/0927-0248(94)90029-9 ↗
6. MIS-stimulated back-surface passivation of interdigitated back-contacts solar cells10.1016/j.solmat.2004.08.018 ↗
7. Solar cell efficiency tables (version 34)10.1002/pip.911 ↗
8. Low-cost industrial technologies of crystalline silicon solar cells10.1109/5.588971 ↗
9. Efficiency improvements of silicon solar cells by the impurity photovoltaic effect10.1063/1.356025 ↗
10. Development of screen-printed silicon solar cells with high fill factors on 100Ω/sq emitters10.1109/TED.2004.828280 ↗
11. High-efficiency low-cost integral screen-printing multicrystalline silicon solar cells10.1016/S0927-0248(02)00060-0 ↗
12. M. Bahr, S. Kim, S. Sridharan, C. Khadilkar, A. Shaikh, I. Kohler, A new approach for the front side metallization of industrial type silicon solar cells using a structurization by etching, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 2007, pp. 1015–1019.
13. How to design optimal metallization patterns for solar cells10.1002/(SICI)1099-159X(199911/12)7:6<457::AID-PIP278>3.0.CO;2-U ↗
14. A. Mette, New Concepts for Front Side Metallization of Industrial Silicon Solar Cells, Doctoral Thesis, Universität Freiburg Freiburg, 2007, p. 231.
15. Self-aligned metallization and reactive ion etched buried base contact solar cells10.1002/(SICI)1099-159X(199909/10)7:5<387::AID-PIP276>3.0.CO;2-3 ↗
16. F. Duerinckx, P. Choulat, G. Beaucarne, R.J.S Young, M. Rose, J.A. Raby, Improved screen printing process for very thin multicrystalline silicon solar cells, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, 2004, pp. 443–446.
17. Solar cell contact resistance—a review10.1109/T-ED.1984.21583 ↗