journal article·2013-09

Tetrafluorene-9,9′-bifluorenylidene as a non-fullerene type electron acceptor for P3HT-based bulk-heterojunction polymer solar cells

On You Park, Hee Un Kim, Ji-Hoon Kim, Jong Baek Park, Jeonghun Kwak, Won Suk Shin, Sung Cheol Yoon, Do-Hoon Hwang

Publisher page

Abstract

Abstract 2,2′,7,7′-Tetra(9,9-diethyl-9 H -fluorene)-9,9′-bifluorenylidene (TFBF) was synthesized as a non-fullerene type electron acceptor for bulk-heterojunction polymer solar cells. The TFBF was synthesized from 2,7-di(9,9-diethyl-9 H -fluorene)-9 H -fluoren-9-one by a reductive dimerization using Lawesson's reagent. The TFBF was soluble in common organic solvents such as dichloromethane, chloroform, and 1,2-dichlorobenzene. The synthesis of TFBF was identified by 1 H NMR, 13 C NMR, FAB-Mass, and FT-IR, and the properties of the molecule were characterized by UV–visible absorption and fluorescence spectroscopy. The ionization potential of the TFBF solid thin film was determined by photo-electron spectroscopy, and morphology of the active layer was investigated by atomic force microscope. The measured optical band gap, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of TFBF were 2.32, −5.81, and −3.49 eV, respectively. Photoluminescence (PL) spectra of P3HT solution in chloroform were measured at different TFBF concentration. The PL intensity of P3HT solution was decreased by increasing the TFBF concentration. The electron mobility of P3HT:TFBF blend film was measured to be 6.82×10 −5 cm 2 /Vs at the electric field of 500 (V/cm) 1/2 . Photovoltaic devices were fabricated with the structure of ITO/PEDOT:PSS/P3HT:TFBF/LiF/Al. One of the fabricated device showed the highest V oc of 0.70 V with J sc =1.20 mA/cm 2 , FF =0.30, and PCE =0.26% at donor to acceptor composition ratio of 1:0.4.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Organic photovoltaic films10.1016/S1359-0286(02)00006-2 ↗
2. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
3. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
4. Charge separation and photovoltaic conversion in polymer composites with internal donor/acceptor heterojunctions10.1063/1.359792 ↗
5. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
6. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
7. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
8. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. All solution processed tandem polymer solar cells based on, thermocleavable materials10.1016/j.solmat.2008.05.005 ↗
10. A brief history of the development of organic and polymeric photovoltaics10.1016/j.solmat.2004.02.021 ↗
11. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
12. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
13. Benzotriazole-based donor–acceptor type semiconducting polymers with different alkyl side chains for photovoltaic devices10.1016/j.solmat.2012.09.019 ↗
14. Synthesis and characterization of conjugated polymers containing low-bandgap arylenevinylene units10.1016/j.solmat.2012.02.001 ↗
15. Photovoltaic devices using semiconducting polymers containing head to tail structured bithiophene, pyrene, and benzothiadiazole derivatives10.1002/pola.26130 ↗
16. Introduction of perylene units for enhanced interchain interaction in conjugated polymers for organic photovoltaic devices10.1021/ma202712r ↗
17. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
18. Effects of solubilizing group modification in fullerene bis-adducts on normal and inverted type polymer solar cells10.1021/cm3010369 ↗
19. Carbazole-containing fullerene derivatives for P3HT-based bulk-heterojunction solar cells10.1016/j.solmat.2012.05.017 ↗
20. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
21. Synthesis and characterization of a novel fullerene derivative containing carbazole group for use in organic solar cells10.1016/j.synthmet.2011.04.031 ↗
22. Synthesis of a soluble fulleropyrrolidine derivative for use as an electron acceptor in bulk-heterojunction polymer solar cells10.1016/j.synthmet.2012.01.004 ↗
23. Small-molecule, nonfullerene acceptors for polymer bulk heterojunction organic photovoltaics10.1021/cm1023019 ↗
24. A non-fullerene small molecule as efficient electron acceptor in organic bulk heterojunction solar cells10.1002/adma.201103927 ↗
25. Solution processable low bandgap diketopyrrolopyrrole (DPP) based derivatives: novel acceptors for organic solar cells10.1039/b924404b ↗
26. A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18V10.1039/c2cc31511d ↗
27. A survey of electron-deficient pentacenes as acceptors in polymer bulk heterojunction solar cells10.1039/C0SC00433B ↗
28. Effect of addition of a diblock copolymer on blend morphology and performance of poly(3-hexylthiophene):perylene diimide solar cells10.1021/cm900911x ↗
29. Solution-processed organic solar cells with power conversion efficiencies of 2.5% using benzothiadiazole/imide-based acceptors10.1021/cm203111k ↗
30. Strain and Hückel aromaticity: driving forces for a promising new generation of electron acceptors in organic electronics10.1002/anie.200905117 ↗
31. Bulk heterojunction solar cells with large open-circuit voltage: electron transfer with small donor-acceptor energy offset10.1002/adma.201003768 ↗
32. Deconvoluted fullerene derivatives: synthesis and characterization10.1002/chem.201100442 ↗
33. Phenyl vs alkyl polythiophene: a solar cell comparison using a vinazene derivative as acceptor10.1021/cm903067a ↗
34. Design of new electron acceptor materials for organic photovoltaics: synthesis, electron transport, photophysics, and photovoltaic properties of oligothiophene-functionalized naphthalene diimides10.1021/cm2019668 ↗
35. Improving the performance of P3HT-fullerene solar cells with side-chain-functionalized poly(thiophene) additives: a new paradigm for polymer design10.1021/nn204589u ↗
36. D–π–A–π–D type benzothiadiazole–triphenylamine based small molecules containing cyano on the p-bridge for solution-processed organic solar cells with high open-circuit voltage10.1039/c2cc35754b ↗
37. An all electron numerical method for solving the local density functional for polyatomic molecules10.1063/1.458452 ↗
38. Accurate and simple analytic representation of the electron-gas correlation energy10.1103/PhysRevB.45.13244 ↗
39. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
40. Wong · Nature Materials · 2007 · 6 · 52110.1038/nmat1909 ↗
41. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗