journal article·2015-10

Wavelength influence on the photodegradation of P3HT:PCBM organic solar cells

Laura Córcoles, Jose Abad, Javier Padilla, Antonio Urbina

Publisher page

Abstract

Stability of emerging organic and hybrid photovoltaic solar cells is still the main drawback for a market penetration of this technology. In this article, a study on the photodegradation of standard architecture P3HT:PCBM organic solar cells as a function of the incident radiation wavelength is presented. The organic solar cells were tested without encapsulation in order to accelerate the degradation process. By analyzing the evolution of power conversion efficiency and short circuit current as a function of the incident energy and number of photons, it was found that blue (400-510 nm) and ultraviolet (310-410 nm) wavelengths are the most harmful, being the latter the radiation that induces a faster degradation of the devices. However, the additional contribution of the blue wavelength to degradation represents a significant problem, since this radiation generates an important part of the photocurrent. While adequate filters could avoid the UV degradation without a significant decrease in the organic solar cell performance, the impact of blue radiation reduction poses a more difficult challenge.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Third-generation solar cells: a review and comparison of polymer:fullerene, hybrid polymer and perovskite solar cells
2. New generation solar cells: concepts, trends and perspectives10.1039/C4CC09888A ↗
3. Organic materials for photovoltaic applications: Review and mechanism10.1016/j.synthmet.2014.01.022 ↗
4. Emerging Thin‐Film Photovoltaic Technologies10.1002/cite.201400101 ↗
5. Polymer‐Fullerene Bulk‐Heterojunction Solar Cells10.1002/adma.200801283 ↗
6. Photovoltaic materials, history, status and outlook10.1016/S0927-796X(02)00092-X ↗
8. 3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells10.1002/aenm.201401539 ↗
9. Towards industrialization of polymer solar cells: material processing for upscaling10.1039/C4TA03780D ↗
10. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
11. Recent advances in upscalable wet methods and ink formulations for printed electronics10.1039/C4TC00618F ↗
12. Fabrication and processing of polymer solar cells: A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
13. 〈http://www.nrel.gov/ncpv/images/efficiency_chart.jpg〉
14. Solar cell efficiency tables (version 45)10.1002/pip.2573 ↗
15. Life cycle analysis of organic photovoltaic technologies10.1002/pip.967 ↗
16. The stability of normal vs. inverted organic solar cells under highly damp conditions: comparison with the same interfacial layers10.1016/j.solmat.2014.04.036 ↗
17. Stability of polymer solar cells10.1002/adma.201104187 ↗
18. Recent progress in degradation and stabilization of organic solar cells10.1016/j.jpowsour.2014.04.080 ↗
19. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
20. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
21. Influence of thermal ageing on the stability of polymer bulk heterojunction solar cells10.1016/j.solmat.2006.10.008 ↗
22. Morphology and thermal stability of the active layer in poly(p-phenylenevinylene)/methanofullerene plastic photovoltaic devices10.1021/ma035620+ ↗
23. Organic solar cells: their developments and potentials10.1016/j.rser.2012.12.046 ↗
24. Gas permeation in silicon-oxide/polymer (SiOx/PET) barrier films: role of the oxide lattice, nano-defects and macro-defects10.1016/S0376-7388(02)00178-3 ↗
25. Mechanism of water vapor transport through PET/AlOxNy gas barrier films10.1021/jp036244y ↗
26. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
27. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
28. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
29. Effects of photo-oxidation on the performance of poly [2-methoxy-5-(3,7-dimethyloctyloxy)-1,4-phenylene vinylene]:[6,6]-phenyl C 61-butyric acid methyl ester solar cells10.1002/adfm.200500714 ↗
30. Lifetime analysis and degradation study of polymer solar cells10.1117/12.552113 ↗
31. Interaction of oxygen with conjugated polymers: charge transfer complex formation with poly(3-alkylthiophenes)10.1021/ja964229j ↗
32. Thioozonide decomposition: sulfur and oxygen atom transfer. Evidence for the formation of a carbonyl O-sulfide intermediate10.1021/ja00270a058 ↗
33. Oxygen-induced quenching of photoexcited states in polythiophene films10.1016/j.orgel.2003.12.005 ↗
34. Light-induced degradation of the active layer of polymer-based solar cells10.1016/j.polymdegradstab.2009.11.021 ↗
35. Investigation of photodegradation in polymer solar cells blended with different fullerenes derivatives10.1016/j.solmat.2014.01.001 ↗
36. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
37. Mechanism of ultraviolet degradation and stabilization in plastics10.1002/pen.760100408 ↗
38. Conductivity, morphology, interfacial chemistry, and stability of poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate): A photoelectron spectroscopy study10.1002/polb.10659 ↗
39. Wavelength‐Dependent Pathways of Poly‐3‐hexylthiophene Photo‐Oxidation10.1021/cm3008864 ↗
40. Wavelength dependence of nanoscale photodegradation in poly(3-octylthiophene) thin films10.1016/j.polymdegradstab.2011.04.002 ↗
41. Concepts and strategies for photovoltaic devices with fullerenes
42. Photo- and thermal degradation of MDMO-PPV:PCBM blends10.1016/j.solmat.2006.10.015 ↗
43. Improvement of operation lifetime for conjugated polymer:fullerene organic solar cells by introducing a UV absorbing film10.1016/j.solmat.2009.08.011 ↗
44. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
45. Synthesis and characterization of a low bandgap conjugated polymer for bulk heterojunction photovoltaic cells10.1002/1616-3028(200108)11:4<255::AID-ADFM255>3.0.CO;2-I ↗
46. Near-infrared organic compounds and emerging applications10.1002/asia.200900596 ↗