journal article·2022-10

Analysis of degradation kinetics of halide perovskite solar cells induced by light and heat stress

Dhruba B. Khadka, Yasuhiro Shirai, Masatoshi Yanagida, Koichiro Uto, Kenjiro Miyano

Publisher page

Abstract

The operational stability of encapsulated perovskite solar cells (PSCs) is imperative for commercialization. Here, we have investigated the degradation of PSCs with organic (PTAA) and inorganic (NiO x ) HTLs under constant illumination and thermal stress. The device parameters under 1-sun illumination were monitored over time at different temperatures; 20–85 °C. The temperature-dependent device parameters analysis showed a lower value of degradation activation energy (E A) for the device with the PTAA (∼0.274 ± 0.05 eV) than that for the NiO x device (∼0.495 ± 0.05 eV). This result corroborates that higher activation energy for NiO x /HaP devices leads to superior device stability. The device degradation kinetic has been discussed by adopting the Arrhenius model with temperature and humidity prefactor correction associated with structural defects in the bulk and interfacial deterioration. Our analysis underscores the importance of the layer material`s stability against humidity and thermal stress for the device stability correlating degradation activation energy and stress prefactor.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
3. Hybrid organic-inorganic perovskites: low-cost semiconductors with intriguing charge-transport properties10.1038/natrevmats.2015.7 ↗
4. Cost-performance analysis of perovskite solar modules10.1002/advs.201600269 ↗
5. Comparison of perovskite solar cells with other photovoltaics technologies from the point of view of life cycle assessment10.1002/aesr.202000088 ↗
6. Measuring aging stability of perovskite solar cells10.1016/j.joule.2018.05.005 ↗
7. Systematic investigation of the impact of operating conditions on the degradation behaviour of perovskite solar cells10.1038/s41560-017-0060-5 ↗
8. Performance of perovskite solar cells under simulated temperature-illumination real-world operating conditions10.1038/s41560-019-0400-8 ↗
9. Pseudohalide functional additives in tin halide perovskite for efficient and stable Pb-free perovskite solar cells10.1021/acsaem.1c02496 ↗
10. Degradation observations of encapsulated planar CH3NH3PbI3 perovskite solar cells at high temperatures and humidity10.1039/C5TA00358J ↗
11. UV degradation and recovery of perovskite solar cells10.1038/srep38150 ↗
12. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
13. Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques10.1021/nn506864k ↗
14. Electric-field-induced degradation of methylammonium lead iodide perovskite solar cells10.1021/acs.jpclett.6b01176 ↗
15. Strained hybrid perovskite thin films and their impact on the intrinsic stability of perovskite solar cells10.1126/sciadv.aao5616 ↗
16. Degradation of encapsulated perovskite solar cells driven by deep trap states and interfacial deterioration10.1039/C7TC03733C ↗
17. The molybdenum oxide interface limits the high-temperature operational stability of unencapsulated perovskite solar cells10.1021/acsenergylett.0c01023 ↗
18. Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements10.1007/s00339-003-2499-4 ↗
19. Walter · 2015 · 111
20. Analysis of activation energies and decay-time constants of potential-induced degraded crystalline silicon solar cells10.1016/j.egypro.2015.07.002 ↗
21. Accelerated stress testing and diagnostic analysis of degradation in CdTe solar cells
22. Significance of metastable acceptors in Cu(In,Ga)Se 2 solar cells in accelerated lifetime testing, Jpn10.7567/JJAP.57.092301 ↗
23. 1000 h operational lifetime perovskite solar cells by ambient melting encapsulation10.1002/aenm.201902472 ↗
24. Kinetics of light-induced degradation in semi-transparent perovskite solar cells10.1016/j.solmat.2020.110776 ↗
25. Methylammonium chloride as an interface modificator for planar-structure perovskite solar cells with a high open circuit voltage of 1.19V10.1016/j.jpowsour.2020.229073 ↗
26. Small molecule modulator at the interface for efficient perovskite solar cells with high short‐circuit current density and hysteresis free10.1002/aelm.202000604 ↗
27. Spontaneous interface engineering for dopant-free poly(3-hexylthiophene) perovskite solar cells with efficiency over 2410.1039/D0EE03312J ↗
28. Achieving long‐term operational stability of perovskite solar cells with a stabilized efficiency exceeding 20% after 1000 h10.1002/advs.201900528 ↗
29. Stability of halide perovskite solar cell devices: in situ observation of oxygen diffusion under biasing10.1002/adma.201802769 ↗
30. Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells10.1039/C6EE00409A ↗
31. Light and elevated temperature induced degradation (LeTID) in perovskite solar cells and development of stable semi-transparent cells10.1016/j.solmat.2018.08.017 ↗
32. Unraveling the impacts induced by organic and inorganic hole transport layers in inverted halide perovskite solar cells10.1021/acsami.8b20924 ↗
33. Enhancement in efficiency and optoelectronic quality of perovskite thin films annealed in MACl vapor10.1039/C7SE00033B ↗
34. Exploring the effects of interfacial carrier transport layers on device performance and optoelectronic properties of planar perovskite solar cells10.1039/C7TC02822A ↗
35. Limitations of a polymer-based hole transporting layer for application in planar inverted perovskite solar cells10.1039/C9NA00246D ↗
36. Altered stability and degradation pathway of CH3NH3PbI3 in contact with metal oxide10.1021/acsenergylett.0c00041 ↗
37. Insights into accelerated degradation of perovskite solar cells under continuous illumination driven by thermal stress and interfacial junction10.1021/acsaem.1c02037 ↗
38. I 2 vapor-induced degradation of formamidinium lead iodide based perovskite solar cells under heat–light soaking conditions10.1039/C9EE02043H ↗
39. Severe morphological deformation of spiro-OMeTAD in (CH3NH3)PbI3 solar cells at high temperature10.1021/acsenergylett.7b00582 ↗
40. Entropy-driven stabilization of the cubic phase of MaPbI 3 at room temperature10.1039/D0TA10492B ↗
41. Defect passivation using ultrathin PTAA layers for efficient and stable perovskite solar cells with a high fill factor and eliminated hysteresis10.1039/C9TA08314F ↗
42. A cell-to-module-to-array detailed model for photovoltaic panels10.1016/j.solener.2012.06.004 ↗
43. Accelerated life testing
44. TamizhMani · 2013 · 106
45. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
46. Structures, phase transitions and tricritical behavior of the hybrid perovskite methyl ammonium lead iodide10.1038/srep35685 ↗
47. Transition from the tetragonal to cubic phase of organohalide perovskite: the role of chlorine in crystal formation of CH3NH3PbI3 on TiO2 substrates10.1021/acs.jpclett.5b01682 ↗
48. Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour