journal article·2019-09

The influence of Ag-ion concentration on the performance of mc-Si silicon solar cells textured by metal assisted chemical etching (MACE) method

Pengfei Zhang, Rui Jia, Ke Tao, Shuai Jiang, Xiaowan Dai, Hengchao Sun, Zhi Jin, Zhuoyu Ji, Xinyu Liu, Chongyou Zhao, Hongzhi Liu, Yaopei Zhao, Lei Tang

Publisher page

Abstract

Abstract As diamond wire sawn (DWS) technique for multi-crystalline Si (mc-Si) becomes mainstream wafering technology in Si-based photovoltaic industry, metal assisted chemical etching (MACE) method will become a key technique to improve conversion efficiency. Due to the intrinsic characteristic of Ag nanoparticles precipitation reaction in solution in the first step of MACE, a large number of deep nanopores are produced on the surface of mc-Si wafer in the following etching step. The deep nanopores can lead to the degradation of mc-Si solar cell's performances. Thus, the influences of Ag-ion concentration in the first step of MACE on the solar cell's performances was carefully studied. It's found that with the increasing of Ag-ion concentration, the light trapping capabilities keeps improving. However, the solar cell's electric performances deteriorate dramatically when Ag-ion concentration reaches to a certain value. Optical and electrical simulation is performed to explain the influences of deep nanopores on the mc-Si solar cell's performances. It is found that there is an optimum Ag-ion concentration value to enhance the mc-Si solar cell's performances, and an efficiency of 18.94% is obtained for large size of 156.75 × 156.75 mm2 wafer. An absolute efficiency of 0.5% was improved as compared to the conventional acidic textured DWS mc-Si solar cell. It shows the necessity of controlling the Ag-ion concentration in the manufacture of black silicon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
2. On the nature and removal of saw marks on diamond wire sawn multicrystalline silicon wafers10.1016/j.mssp.2014.06.049 ↗
3. Study on nano-pores enlargement during Ag-assisted electroless etching of diamond wire sawn polycrystalline silicon wafers10.1016/j.mssp.2016.08.004 ↗
4. Enhanced properties of silicon nano-textured solar cells enabled by controlled ZnO nanorods coating10.1016/j.solener.2015.03.019 ↗
5. The study of the defect removal etching of black silicon for diamond wire sawn multi-crystalline silicon solar cells10.1016/j.solener.2018.04.066 ↗
6. The influence of black silicon morphology modification by acid etching to the properties of diamond wire sawn multicrystalline silicon solar cells10.1109/JPHOTOV.2018.2829085 ↗
7. Plasma texturing for silicon solar cells: from pyramids to inverted pyramids-like structures10.1016/j.solmat.2009.12.015 ↗
8. Comparison of structure and properties of femtosecond and nanosecond laser-structured silicon10.1063/1.1667004 ↗
9. An EIS investigation into the influence of HF concentration on porous silicon formation10.1149/2.089403jes ↗
10. Fabrication of n-type mesoporous silicon nanowires by one-step etching10.1021/nl202674t ↗
11. Investigation of acidic texturization for multicrystalline silicon solar cells10.1149/1.1391628 ↗
12. Texturization of multicrystalline silicon by wet chemical etching for silicon solar cells10.1007/s10853-005-0583-1 ↗
13. An 18.2%-efficient black-silicon solar cell achieved through control of carrier recombination in nanostructures10.1038/nnano.2012.166 ↗
14. Metal-particle-induced, highly localized site-specific etching of Si and formation of single-crystalline Si nanowires in aqueous fluoride solution10.1002/chem.200600032 ↗
15. Metal-assisted chemical etching in HF/H(2)O(2) produces porous silicon10.1063/1.1319191 ↗
16. Metal-assisted chemical etching of silicon: a review10.1002/adma.201001784 ↗
17. Chemical etching of silicon .1. The system hf, hno3, and h2o10.1149/1.2427558 ↗
18. Chemical etching of silicon .1. The system hf,hno3, and h2o10.1149/1.2427397 ↗
19. Chemical etching of silicon .3. A temperature study in the acid system10.1149/1.2428090 ↗
20. Efficient nanostructured 'black' silicon solar cell by copper-catalyzed metal-assisted etching10.1002/pip.2562 ↗
21. The influence of surface structure on diffusion and passivation in multicrystalline silicon solar cells textured by metal assisted chemical etching (MACE) method10.1016/j.solmat.2018.06.011 ↗
22. Measurement of minority carrier lifetime and surface effects in junction devices
23. Efficiency limits for single junction and tandem solar cells10.1016/j.solmat.2006.06.002 ↗
24. Fundamental losses in solar cells10.1002/pip.1024 ↗
25. Photographic surveying of minority carrier diffusion length in polycrystalline silicon solar cells by electroluminescence10.1063/1.1978979 ↗