Effect of interconnect geometry on the evolution of stresses in a solar photovoltaic laminate during and after lamination
Source abstract
Abstract
Abstract Fracture in silicon crystalline solar cells has been a long-standing challenge encountered in the photovoltaic (PV) industry. This occurs as result of stresses developing in the cells due to thermo-mechanical stresses that arise when there is a mismatch in the coefficient of thermal expansion (CTE) between the different constituent materials during the manufacturing processes as well as mechanical stresses from hail, snow and wind during field operations. Through finite element simulations, this paper investigates the effect of interconnect cross-sectional geometry on stresses developed in silicon cells during the entire PV manufacturing cycle and provides physical reasoning to its stress evolution. The simulations are performed in a sequential manner whereby the residual stresses developed at the end of one step is brought forward to the beginning of the next step. It is found that the highest cell stresses occur at the back surfaces of the cells at the end of the pressure-ramping step during lamination. In addition, increasing the thickness of the front interconnects significantly increases the stresses developed in the cells during lamination. This predicted trend is verified experimentally.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Energy pay-back time and life-cycle CO2 emission of residential PV power system with silicon PV module10.1002/(SICI)1099-159X(199803/04)6:2<105::AID-PIP212>3.0.CO;2-C ↗
2. Back‐contact solar cells: a review10.1002/pip.657 ↗
3. The multi-busbar design: an overview10.1016/j.egypro.2013.11.092 ↗
4. Multi-wire interconnection of busbar-free solar Cells10.1016/j.egypro.2014.08.109 ↗
5. Enabling thin silicon technologies for next generation c-Si solar PV renewable energy systems using synchrotron X-ray Microdiffraction as stress and crack mechanism probe10.1016/j.solmat.2014.07.029 ↗
6. Influence of cracks on the local current-voltage parameters of silicon solar cells: influence of cracks in silicon solar cells10.1002/pip.2443 ↗
7. The risk of power loss in crystalline silicon based photovoltaic modules due to micro-cracks10.1016/j.solmat.2010.10.034 ↗
8. Spatial and orientational distribution of cracks in crystalline photovoltaic modules generated by mechanical load tests10.1016/j.solmat.2011.06.032 ↗
9. F. Kraemer, J. Seib, E. Peter and S. Wiese, "Mechanical stress analysis in photovoltaic cells during the string-ribbon interconnection process", in: Proceedings of the 15th International Conference on Thermal, Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), pp. 1– 7, 2014.10.1109/EuroSimE.2014.6813853 ↗
10. From cells to laminate: probing and modeling residual stress evolution in thin silicon photovoltaic modules using synchrotron X-ray micro-diffraction experiments and finite element simulations10.1002/pip.2891 ↗
11. Probing stress and fracture mechanism in Encapsulated thin silicon solar cells by synchrotron X-ray microdiffraction10.1016/j.solmat.2016.12.028 ↗
12. Probing phase transformations and microstructural evolutions at the small scales: synchrotron X-ray microdiffraction for advanced applications in 3D IC (Integrated Circuits) and solar PV (Photovoltaic) devices10.1007/s11664-016-5012-5 ↗
13. Low stress encapsulant? – Influence of lamination materials on stress and fracture of thin silicon solar cells as quantified by synchrotron x-ray submicron diffraction10.1016/j.proeng.2015.09.230 ↗
14. Synchrotron X-ray microdiffraction – probing stress state in encapsulated thin silicon solar cells10.1016/j.proeng.2015.09.241 ↗
15. Mechanical and thermomechanical assessment of encapsulated solar cells by finite-element-simulation
16. Y. Lee and A.A.O. Tay, "Finite element thermal stress analysis of a solar photovoltaic module", in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference (PVSC), p. 3179, 2011.
17. Y. Lee and A.A.O. Tay, Stress Analysis of Silicon Wafer Based Photovoltaic Modules in Operation, in: Proceedings of the 38th IEEE Photovoltaic Specialists Conference (PVSC), Austin, Jun 03-08, 2012, pp. 3172–3177, 2012.
18. Serreze, H. B. "Optimizing solar cell performance by simultaneous consideration of grid pattern design and interconnect configuration." in: Proceedings of the 13th Photovoltaic Specialists Conference, Washington D.C., pp. 609–614. 1978.
19. A. Schneider, R. Fernada, T. Link, J. I. F. Martinez and J Schmauder. Impact of ribbon specification and handling during PV manufacturing to module reliability, in: Proceedings of the 32nd EUPVEC, Munich, p. 1583–1588, (2016).
20. Modeling of voids evolution in the encapsulation process of photovoltaic modules
21. Honeker, C. PV module manufacturing metrology: measuring the making of solar modules. [online] PV Tech. Available at: 〈https://www.pv-tech.org/guestblog/pv_module_manufacturing_metrology_measuring_the_making_of_solar_modules〉 (Accessed 1 Oct.2017).
22. Numerical investigation on residual stress in photovoltaic laminates after lamination10.1007/s12206-015-0125-y ↗
23. Finite element modeling, analysis, and life prediction of photovoltaic modules10.1115/1.4026037 ↗
24. S. Wiese, R. Meier, F. Kraemer and J. Bagdahn, "Constitutive behaviour of copper ribbons used in solar cell assembly processes", EuroSimE 2009, in: Proceedings of the10th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, pp. 1–8, 2009.10.1109/ESIME.2009.4938464 ↗
25. W.J.R. Song, S.K. Tippabhotla, A.A.O. Tay and A.S. Budiman, Numerical Simulation of the Evolution of Stress in Solar Cells During the Entire Manufacturing Cycle of a Conventional Silicon Wafer Based Photovoltaic Laminate., IEEE Journal of Photovoltaics, 8(1), pp. 210–217.10.1109/JPHOTOV.2017.2775158 ↗